Shotshell Reloading Components
BPI FIBER WAD 12ga .50″- THICK/.74″-Dia. 500/Bag
Product Information
Cork wads are placed under the shot bringing the load up to perfect crimping height. Cork wads are light, dense and very flexible - great for smaller pellet sizes. Cork wads can be stacked to accomodate any height requirements. Use 12 gauge cork wads inside 10 gauge shotcups and 20 gauge cork wads inside 12 gauge shotcups. Cork wads can be used in place of other filller wads but are not to be used directly on the powder.
BPI GAS SEAL X12X 12ga 250/BAG
Product Information
The X12X is our best selling gas seal. Our lab has yet to test another gas seal that more effectively and efficiently seals propellant gases - even the slowest of slow burn powders.
This gas seal is used by many high-specification cartridge manufacturers. The X12X is the primary wad in many factory specialty rounds, including law enforcement and military loads for all weather conditions. The X12X is symmetrical and this means that there is no need to orient it either up or down when loading. The X12X provides highly effective gas sealing with slow burn rate as well as fast burn rate powders.
Dimensions: .727" x .272"
BPI MAXI NITRO CARD 410 BORE.125″/.412″-Dia 500/Bag
Product Information
Nitro cards are used as a seal between the powder and the shot. They can be used in place of a plastic shotcup in fiber wad loads.
Most modern load designs use nitro card (reduced diameter) wads within a shotcup for managing space. They can also be placed over the powder and underneath the wad to push up the entire shot column. We’ve even used these .125″ as overshot cards. They produce better crimps and serve as a valuable spacer.
Nitro card wads are constructed of a specialized material selected to withstand the tortures of slow-burning powders and heavy payloads.
BPI MINI NITRO CARD 410ga .070″/.412″-Dia 500/Bag
Product Information
Nitro cards are used as a seal between the powder and the shot. They can be used in place of a plastic shotcup in fiber wad loads.
Most modern load designs use nitro card (reduced diameter) wads within a shotcup for managing space. They can also be placed over the powder and underneath the wad to push up the entire shot column. We’ve even used these .070″ as overshot cards. They produce better crimps and serve as a valuable spacer.
Nitro card wads are constructed of a specialized material selected to withstand the tortures of slow-burning powders and heavy payloads.
BPI MIX #47 SHOTSHELL BUFFER 1/2LB
Product Information
Years ago, Ballistic Products developed this special combination of ingredients to handle the difficulties of steel and very large pellets. As an absolute success, Mix 47 has been used for all buffering applications since. Minimum pressure increase, maximum pattern density, and round pellets are the result with Mix 47. Mix 47 stabilizes steel shot pellets and keeps patterns dense, even under the stress of 1500 fps velocities!
BPI POWER HULL SKIVER 20ga – 10ga
Product Information
Machined from tough aircraft aluminum, our Power Skivers attach to your drill or drill press and make quick work of any hull skiving or hull reshaping job. Just a quick spin is all it takes to improve your crimp quality. This tool is Curmudgeon tested and approved. It is guaranteed to reduce stress on your reloading bench. We've put a deeper knurl in this product to improve the cutting function of the tool. It is now faster than ever.
BPI POWER HULL SKIVER 410ga – 20GA
Product Information
Machined from tough aircraft aluminum, our Power Skivers attach to your drill or drill press and make quick work of any hull skiving or hull reshaping job. Just a quick spin is all it takes to improve your crimp quality. This tool is Curmudgeon tested and approved. It is guaranteed to reduce stress on your reloading bench. We've put a deeper knurl in this product to improve the cutting function of the tool. It is now faster than ever.
BPI SHOT STEEL #7 .100″ 10LB BAG
BPI SHOT STEEL #BB .180″ 10LB PER BAG
BPI TRIM DOCTOR 2 12ga w/ EXACTA-TRIM BUSHING
Product Information
Two tools in one:
- Â Shotshell case length trimmer that produces exacting cuts and ideal short cases
-
Case disassembly tool
BPI TRIM DOCTOR 2 20ga w/ EXACTA-TRIM BUSHING
Product Information
Two tools in one:
- Â Shotshell case length trimmer that produces exacting cuts and ideal short cases
-
Case disassembly tool
After years of searching the world for just the right case trimmer without success, our ballistic technicians demanded that BPI make this convenient and necessary tool. A threaded adjustment gauge in the Trim Doctor holds shells in alignment to produce a clean and crimpable edge. The Trim Doctor is designed to remove 1/4″ at a time (about the same as full fold crimp): 3″ shells become 2-3/4″, 2-3/4″ become 2-1/2″. Two full cuts on a 10 gauge shell produce a 2-7/8″ shell. Select the gauge of your new Trim Doctor; it comes with one gauge adaptor bushing.
Our new ExactaTrim adaptor bushings assure tight cuts with no spiraling and they are available in additional sizes to make your Trim Doctor even more versatility.
As a shell disassembly tool, the Trim Doctor works on any gauge, 10ga through .410. Just remove the threaded guide, insert loaded shell into opening and gently turn the shell while applying slight pressure to the blade guide. The top of shell will pop off cleanly after a few turns.
The Trim Doctor will pay for itself many times over by allowing you to retrieve components from reject shells and by allowing further firings out of many hulls with tired crimps.
NOTE: Does not include different bushings. Must purchase separately.
