Rifle & Pistol Reloading Tools & Lubes
LEE 338 WINCHESTER MAG 3 DIE SET w/FACTORY CRIMP, S/H #5
LEE 338 WINCHESTER MAG COLLET DIE ONLY
Product Information
A collet squeezes the case neck against a precision mandrel for a perfect fit with minimum run-out. No lube case is needed and neck sizing extends case life. This dies sizes only the neck to preserve the perfect fit of fire forming. Only reload cases that have been fired in your gun. Not recommended for autoloaders, slide or lever action guns. Includes: Collet neck sizing die only.
LEE 348 WINCHESTER 3 DIE SET w/FACTORY CRIMP, S/H #8
LEE 35 REMINGTON 3 DIE SET w/FACTORY CRIMP, S/H #2
LEE 350 LEGEND 3-DIE SET w/ PWD THRU EXP DIE
Lee 350 Legend Pistol 3-Die Steel Set includes Steel Full Length Sizing Die, Powder Thru Expanding Die, Bullet Seating Die, Universal Shell Holder, Powder Dipper, load data and instructions. Collet style factory crimp die is sold separately.
LEE 375 H&H 3 DIE SET w/FACTORY CRIMP, S/H #5
Product Information
Lee uses a solid carbide insert, ground to a special contour that does not leave a belt mark on the case like other carbide dies. With a carbide sizer, no case lube is needed. Sizer also features an unbreakable decapper and built-in stuck case remover. The Powder Through Expanding Die permits charging the case while expanding the case mouth. The Bullet Seat and Feed Die features a free floating bullet seater to insure maximum accuracy.
Includes:
Sizer/Decapping Die, Powder Through Expanding Die, Bullet Seat and Feed Die, Shellholder, Powder Dipper and Load Data.
Lee 38 S&W Carbide 3-Die Set
Product Information
The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Carbide 3-Die Set comes packaged with a carbide sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. Each die set comes packaged with the appropriate shellholder, powder dipper, load data sheet and plastic storage container. One of the great features of carbide dies is that they do not require the cases to be lubricated prior to use like non-carbide dies. Notes: Adjustable crimp from slight taper to full roll
LEE 38 SPL CASE LENGTH GAUGE & SHELLHOLDER
Product Information
The simplest way to check the case and trim to the correct safe length is with a Lee Case Trimmer. After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. The Cutter and Lock Stud (sold separately) works for all calibers. The Case Length Gauge (Pilot) and Shell Holder must be ordered for each caliber. Trim cases by hand or electrically. Can be used with an electric drill to trim, chamfer and polish cases faster. Eliminates danger of long cases. Squares the mouth for more accurate bullet seating and exit. Includes Case Length Gauge and Shellholder only.
LEE 38-40 WINCHESTER 3 DIE SET w/PWD THRU EXP DIE, S/H#14
Product Information
Lee 38-40 Steel 3-Die Set. Includes Full Length Sizing Die, Bullet Seating Die, Powder Through Expanding Die, Universal Shell Holder, Powder Dipper and Instructions/Load Data.
Please note: Lee dies size to minimum headspace so your brass does not get over-worked and maintains accuracy. If you have issues chambering sized cases in your antique firearm, you may send in your sizing die along with 3 fired cases for a headspace adjustment. There is no charge for this service.
Lee resizing lubricant is required with this die set.
LEE 38-40 WINCHESTER FACTORY CRIMP DIE
Product Information
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information: Material: Steel Fits: Reloading presses that accept standard 7/8''-14 Threads Accessories: •Plastic Storage Box
