Rifle & Pistol Reloading Tools & Lubes
Hornady Shellplate #2 – 219Zip/25-35 30-30/375W/32-40/7.5×55
Product Information
For use with Hornady Lock-N-Load and Pro-Jector progressive presses. This Shellplate can be also used instead of a #45 Shellplate for 45acp cases. Fits:- 219 Zipper
- 5.6x52mm Rimmed
- 22 Savage High Powder
- 25-35 WCF
- 7x30 Waters
- 30-30 Winchester
- 30 Herrett
- 32 Winchester Special
- 32-40 WCF
- 8.15x45mm Rimmed (321 Dia)
- 357 Herrett
- 375 Winchester
- 7.5x55mm Schmidt Rubin Swiss
INLINE FABRICATION QUICK CHANGE STORAGE DOCK DOUBLE
LEE – 40 S&W/10mm Carbide Factory Crimp Die
Product Information
Lee 40 S&W/10mm Auto Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. This die applies a taper crimp. The adjusting screw quickly and easily sets the desired amount of crimp. Trim Length is not critical so this extra operation takes less time than it would if cases were trimmed and chamfered. A firm crimp is essential for dependable and accurate ammunition, as it eliminates the problems of poor ignition of slow burning magnum powders.
LEE – 40 S&W/10mm Carbide Taper Crimp Die
LEE – 25-35 WCF CASE LENGTH GAUGE & SHELLHOLDER
Product Information
The simplest way to check the case and trim to the correct safe length is with a Lee Case Trimmer. After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. The Cutter and Lock Stud (sold separately) works for all calibers. The Case Length Gauge (Pilot) and Shell Holder must be ordered for each caliber. Trim cases by hand or electrically. Can be used with an electric drill to trim, chamfer and polish cases faster. Eliminates danger of long cases. Squares the mouth for more accurate bullet seating and exit. Includes Case Length Gauge and Shellholder only. Lee 25-35 WCF Case Length Gauge is a precise, easy way to trim to length and square the case mouth.
LEE – CLASSIC CAST PRESS SINGLE STAGE
Product Information
Now includes Breech Lock Bushing Update Kit
The largest opening in the industry and the longest stroke– handle is adjustable to provide the least travel of any press.
Rigid cast iron construction in a classic “O” design for maximum strength. Baked powder coating is durable and makes the Classic Cast a handsome addition to any reloading bench.
Adjustable handle is movable side to side for left or right hand operation. Start and stop position is adjustable with a 48-tooth ratchet type handle clamp. In addition, the handle length is completely adjustable. Shorten it when loading handgun and short rifle cases.
Automatic primer arm with bottom of stroke priming for best feel. Includes two primer arms for large and small primers. No more fumbling with tiny guides and springs.
The original Classic Cast designed to work with large series 1 1/4-12 dies. Includes breech lock quick change adapter and breech lock bushing to accept standard 7/8-14 dies.
Large 1 1/8 diameter ram drilled completely through to allow spent primer disposal direct to trash can with attached tube. Ram is two-piece to allow installation of the mammoth 50 BMG shell holder. All support by over 12 square inches of ram bearing surface.
Accepts standard shell holders, ram insert can be rotated to allow primer installation on right or left side.
e.
LEE – 10mm CASE LENGTH GAUGE & SHELLHOLDER
Product Information
The simplest way to check the case and trim to the correct safe length is with a Lee Case Trimmer. After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. The Cutter and Lock Stud (sold separately) works for all calibers. The Case Length Gauge (Pilot) and Shell Holder must be ordered for each caliber. Trim cases by hand or electrically. Can be used with an elecrtric drill to trim, chamfer and polish cases faster. Eliminates danger of long cases. Squares the mouth for more accurate bullet seating and exit. Includes Case Length Gauge and Shellholder only.
LEE – 222 REM CASE LENGTH GAUGE & SHELLHOLDER
Product Information
The simplest way to check the case and trim to the correct safe length is with a Lee Case Trimmer. After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. The Cutter and Lock Stud (sold separately) works for all calibers. The Case Length Gauge (Pilot) and Shell Holder must be ordered for each caliber. Trim cases by hand or electrically. Can be used with an elecrtric drill to trim, chamfer and polish cases faster. Eliminates danger of long cases. Squares the mouth for more accurate bullet seating and exit. Includes Case Length Gauge and Shellholder only.
LEE – 223 REM CASE LENGTH GAUGE & SHELLHOLDER
Product Information
The simplest way to check the case and trim to the correct safe length is with a Lee Case Trimmer. After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. The Cutter and Lock Stud (sold separately) works for all calibers. The Case Length Gauge (Pilot) and Shell Holder must be ordered for each caliber. Trim cases by hand or electrically. Can be used with an elecrtric drill to trim, chamfer and polish cases faster. Eliminates danger of long cases. Squares the mouth for more accurate bullet seating and exit. Includes Case Length Gauge and Shellholder only.
LEE – 223 REM FACTORY CRIMP DIE
Product Information
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information:Material: Steel
Fits: Reloading presses that accept standard 7/8''-14 Threads
Accessories: •Plastic Storage Box
LEE – 243 WIN CASE LENGTH GAUGE & SHELLHOLDER
Product Information
The simplest way to check the case and trim to the correct safe length is with a Lee Case Trimmer. After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. The Cutter and Lock Stud (sold separately) works for all calibers. The Case Length Gauge (Pilot) and Shell Holder must be ordered for each caliber. Trim cases by hand or electrically. Can be used with an elecrtric drill to trim, chamfer and polish cases faster. Eliminates danger of long cases. Squares the mouth for more accurate bullet seating and exit. Includes Case Length Gauge and Shellholder only.
