Rifle & Pistol Reloading Tools & Lubes
Hornady Shell Holder #2 219 Zipper/25-35 Winchester/30-30 Winchester/375 Winchester/32-40 Winchester
Product Information:
Precision machined from solid steel then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories including the Hornady Cam-Lock Case Trimmer and Hand-Held Priming Tool. These shellholders will also fit the presses of most other brands in the industry. Fits the following calibers:- 219 Zipper
- 5.6x52mm Rimmed
- 22 Savage High Powder
- 25-35 WCF
- 7x30 Waters
- 30-30 Winchester
- 30 Herrett
- 32 Winchester Special
- 32-40 WCF
- 8.15x45mm Rimmed (321 Dia)
- 357 Herrett
- 38-55 WCF
- 375 Winchester
- 7.5x55mm Schmidt Rubin Swiss
Hornady Shell Holder #45 45 ACP/45 Win Mag
Product Information
Precision machined from solid steel, then heat treated to perform flawlessly for the life of the press. They fit all other Hornady accessories (Case Trimmer, Hand-Held Priming Tool, etc.) so there are no special shellholders to buy. Also fits most other brands of reloading presses. Fits the following calibers: Fits:- 45acp
- 45 Winchester Magnu
Hornady Shell Plate #14 33 Winchester/338-378 Weatherby Magnum/416/460 Weatherby Magnum/ 45-70 Govt/475/480 Ruger
Product Information
The Hornady Lock-N-Load AP Progressive Press Shellplate makes changing calibers a breeze on your Hornady Lock-N-Load Press and the older Hornady Projector Press. There is a shellplate available to fit almost every caliber. The shellplate numbers correspond with the Hornady shellholder numbers for different calibers. These shellplates are designed to work with the EZ-Ject System and Pro-Jector presses.
Fits:
- 33 Winchester
- 378 Weatherby
- 416 Weatherby
- 460 Weatherby
- 45-70 Government
- 475 Linebaugh
- 480 Ruger
Hornady Shellplate #2 – 219Zip/25-35 30-30/375W/32-40/7.5×55
Product Information
For use with Hornady Lock-N-Load and Pro-Jector progressive presses. This Shellplate can be also used instead of a #45 Shellplate for 45acp cases. Fits:- 219 Zipper
- 5.6x52mm Rimmed
- 22 Savage High Powder
- 25-35 WCF
- 7x30 Waters
- 30-30 Winchester
- 30 Herrett
- 32 Winchester Special
- 32-40 WCF
- 8.15x45mm Rimmed (321 Dia)
- 357 Herrett
- 375 Winchester
- 7.5x55mm Schmidt Rubin Swiss
Hornady Shellplate #8: 30Luger/9mm Luger/9×21/9×18/38Sup Auto
Hornady Unique Case Lube Tub 4 Ounce
INLINE FABRICATION QUICK CHANGE STORAGE DOCK DOUBLE
LEE – 40 S&W/10mm Carbide Factory Crimp Die
Product Information
Lee 40 S&W/10mm Auto Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. This die applies a taper crimp. The adjusting screw quickly and easily sets the desired amount of crimp. Trim Length is not critical so this extra operation takes less time than it would if cases were trimmed and chamfered. A firm crimp is essential for dependable and accurate ammunition, as it eliminates the problems of poor ignition of slow burning magnum powders.
LEE – 40 S&W/10mm Carbide Taper Crimp Die
The Lee Taper Crimp Die is hardened steel designed to overcome crimp problems caused by poor die design. These dies offer little or no advantage when used with 1986 or newer Lee dies as the crimp angle is already a modified taper crimp. Jacketed bullets must have a crimp groove (cannelure). Shellholder sold separately. Comes shipped with a plastic storage case.
LEE – 25-35 WCF CASE LENGTH GAUGE & SHELLHOLDER
Product Information
The simplest way to check the case and trim to the correct safe length is with a Lee Case Trimmer. After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. The Cutter and Lock Stud (sold separately) works for all calibers. The Case Length Gauge (Pilot) and Shell Holder must be ordered for each caliber. Trim cases by hand or electrically. Can be used with an electric drill to trim, chamfer and polish cases faster. Eliminates danger of long cases. Squares the mouth for more accurate bullet seating and exit. Includes Case Length Gauge and Shellholder only. Lee 25-35 WCF Case Length Gauge is a precise, easy way to trim to length and square the case mouth.
LEE – 10mm CASE LENGTH GAUGE & SHELLHOLDER
Product Information
The simplest way to check the case and trim to the correct safe length is with a Lee Case Trimmer. After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. The Cutter and Lock Stud (sold separately) works for all calibers. The Case Length Gauge (Pilot) and Shell Holder must be ordered for each caliber. Trim cases by hand or electrically. Can be used with an elecrtric drill to trim, chamfer and polish cases faster. Eliminates danger of long cases. Squares the mouth for more accurate bullet seating and exit. Includes Case Length Gauge and Shellholder only.
