Rifle & Pistol Reloading Tools & Lubes
LEE – 7mm REM FACTORY CRIMP DIE
Product Information
The Lee Precision Factory Crimp Die is designed to give reloaders the perfect crimp on each round of reloaded ammunition. The Factory Crimp Die crimps the bullet more firmly in place than any other die with more uniform pressure. The Factory Crimp Die features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case when crimping when compared to a regular roll crimp die. Lee's testing has shown that using a Factory Crimp Die provides a more uniform pressure curve, increasing the accuracy of any bullet. Shellholder sold separately. Technical Information:Material: Steel
Fits: Reloading presses that accept standard 7/8''-14 Threads
Accessories: •Plastic Storage Box
LEE – 8MM x 57 MAUSER CASE LENGTH GAUGE & SHELLHOLDER
The simplest way to check the case and trim to the correct safe length is with a Lee Case Trimmer. After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. The Cutter and Lock Stud (sold separately) works for all calibers. The Case Length Gauge (Pilot) and Shell Holder must be ordered for each caliber. Trim cases by hand or electrically. Can be used with an elecrtric drill to trim, chamfer and polish cases faster. Eliminates danger of long cases. Squares the mouth for more accurate bullet seating and exit. Includes Case Length Gauge and Shellholder only.
LEE – 9MM LUGER CARBIDE DLX 4 DIE SET w/Dipper & #R19 S/H
Product Information
By separating the seating and crimping operation, you will benefit by a greatly simplified adjustment. More importantly, the Carbide Factory Crimp Die post sizes your case assuring you that any round that passes through the die will chamber properly in your gun.
Includes: Sizer/Decapping Die, Powder Through Expanding Die, Bullet Seat and Feed Die, Factory Crimp Die, Shellholder, Powder Dipper and Load Data.
LEE – 9MM LUGER CARBIDE FACTORY TAPER CRIMP DIE
Product Information
Lee 9MM LUGER Carbide Factory Crimp Die sizes the cartridge while being crimped so every round will positively chamber freely with factory like dependability. This die applies a taper crimp. The adjusting screw quickly and easily sets the desired amount of crimp. Trim Length is not critical so this extra operation takes less time than it would if cases were trimmed and chamfered. A firm crimp is essential for dependable and accurate ammunition, as it eliminates the problems of poor ignition of slow burning magnum powders.
LEE – 9MM LUGER CASE LENGTH GAUGE & SHELLHOLDER
Product Information
The simplest way to check the case and trim to the correct safe length is with a Lee Case Trimmer. After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. The Cutter and Lock Stud (sold separately) works for all calibers. The Case Length Gauge (Pilot) and Shell Holder must be ordered for each caliber. Trim cases by hand or electrically. Can be used with an elecrtric drill to trim, chamfer and polish cases faster. Eliminates danger of long cases. Squares the mouth for more accurate bullet seating and exit. Includes Case Length Gauge and Shellholder only.
LEE – AUTO DISK RISER
LEE – AUTO PRIME XR HAND PRIMING TOOL
Product Information
Fastest, most accurate priming tool made. You never touch the primers from the box to the shell. Automatically feeds and installs primers just as fast as you can place shells in the holder. Each primer is perfectly seated with the feel appreciated by precision reloaders. Built-in primer flipper turns them right wide up. Simply dump the primers into the tray, shake lightly, replace cover and you’re ready to prime. Uses Auto Prime shellholders only (sold separately).
Includes both large and small trays.
LEE – Auto-Disk Adjustable Powder Charge Bar
The Lee Auto-Disk Adjustable Powder Charge Bar is adjustable between .28 CC and 1.6 CC allowing the reloader to develop precise charges. Each adjustment line on the thimble is .1CC. This charge bar comes packaged with a volume measuring density chart for all of today's popular powders and detailed setting instructions. This is a disk with a micrometer setting on it to precisely adjust the powder charge. It is always recommended to weigh out charges.
Technical Information:
Fits:
Lee Auto-Disk Powder Measure
Function: Adjustable Charge Bar
Material: Brass and Polymer
LEE – BENCH PLATE
Product Information
Lee Bench Plate allows for quick press removal without unbolting from bench. Includes 1 steel base block that fits all current Lee metallic presses. Special elevator bolt hardware included. Powder coated, thick steel mounts quickly and securely to any bench or tabletop. Wide steel plate distributes load, adding rigidity to the lightest bench top.
LEE – BREECH LOCK CHALLENGER KIT w/BREECH LOCK PRESS
Product Information
This kit features the same components as the 50th Anniversary Kit, but we have replaced the Safety Prime with the New Auto Prime and a set of Hand Priming Tool Shell Holders. This kit is for those who prefer to prime off the press. Includes the new Breech Lock Challenger Press and one Breech Lock quick-change bushing. You get a complete powder handling system, with the most convenient and repeatable Perfect Powder Measure. Plus the Lee Safety Scale, the most sensitive and safest of all powder scales and fill your case with the included Powder Funnel. Case Preparation Tools include a Value Trim Case Trimmer that allows you to trim directly on your reloading press (order cartridge specific Quick Trim Die separately) and a Cutter and Lock Stud to trim your cases by hand. Order the correct Case Length Gauge for the cartridges you will be loading. An included Chamfer Tool chamfers the inside and outside of the case mouth and a tube of premium Sizing Lube is included. A small and large Primer Pocket-cleaning Tool completes the case preparation package. Please note:  Breech Lock Challenger press is shown mounted to the Lee Bench Plate. This product is sold separately. Technical Information: Press Type: Single Stage Frame Material: Solid Aluminum Frame Design: O Frame Frame Offset: 30 Degrees Frame Opening Size: 4-1/4'' Handle Location: Bottom Right or Left Die Size Accepted: Standard 7/8''-14 Threaded Dies Die Bushing Accepted: Yes Die Bushing Brand Used: Lee Breech Lock Quick Change Bushings Spent Primer Collection System: Yes Ram Stroke: 3-1/2'''' Ram Diameter: .815'' Priming Feature: No Number of Mounting Holes: 3 Mounting Hardware Included: No Kit Includes: •Lee Auto Prime. •Lee Auto Prime Shellholder Set of 11. •Lee Cutter and Lock Stud. •Lee Value Trim Case Trimmer •Lee Perfect Powder Measure. •Lee Chamfer Tool. •Lee Primer Pocket Cleaner •Lee Safety Powder Scale. •Lee Powder funnel. •2 oz Tube Lee Resizing Case Lube. ATTENTION: This kit does not include reloading dies, case length gages or shellholders for the Challenger Breech Lock Single Stage Press.
LEE – Breech Lock Hand Press Only
Product Information
The Lee Breech Lock Hand Press takes all of the great features of the Lee Hand Held Press and adds Lee's convenient Breech Lock System that allows reloaders to quickly change dies without having to readjust dies. A full size hand held reloading press, yet the tool weighs only 1-1/2 lbs and costs so little reloaders will want more than one. No matter how much reloading equipment a reloader has, it is really great to have a portable hand press. No time is wasted mounting a tool to a work bench. When finished reloading, just pack it all away. Technical Information:Press Type: Single Stage Hand Held
Frame Material: Aluminum
Frame Design: C-Frame
Frame Offset: None
Frame Opening Size: 3-1/2"
Handle Location: Bottom Center
Die Size Accepted: 7/8"-14 Threaded Die
Die Bushing Accepted: Yes
Die Bushing Brand Used: Lee Breech Lock
Spent Primer Collection System: None
Priming Feature: Not Included
Number of Mounting Holes: N/A
Mounting Hardware Included: N/A
Kit Includes: Hand Press
Additional Features: Weighs 1-1/2 pounds
Warranty: 2 Year Unconditional Warranty
LEE – BREECH LOCK PRESS 50th ANNIVERSARY KIT
Product Information
Includes the new Breech Lock Challenger Press and one Breech Lock quick-change bushings. You get a complete powder handling system, with the most convenient and repeatable Perfect Powder Measure. Plus the Lee Safety Scale, the most sensitive and safest of all powder scales and fill your case with the included Powder Funnel. Case Preparation Tools include a cutter and lock stud to trim your cases. Order the correct case length gauge for the calibers you will be loading. An included Lee chamfer tool chamfers the inside and outside of the case mouth and a tube of premium sizing lube is included. A small and large primer pocket-cleaning tool completes the case preparation package. You also get the Large and small Safety Prime. Prime with push button convenience and is safe with all brands of primers. Never touch the primer from box to the case. Technical Information:Press Type: Single Stage
Frame Material: Solid Aluminum
Frame Design: O Frame
Frame Offset: 30 Degrees
Frame Opening Size: 4-1/4''
Handle Location: Bottom Right or Left
Die Size Accepted: Standard 7/8''-14 Threaded Dies
Die Bushing Accepted: Yes
Die Bushing Brand Used: Lee Breech Lock Quick Change Bushings
Spent Primer Collection System: Yes
Ram Stroke: 3-1/2''''
Ram Diameter: .815''
Priming Feature: No
Number of Mounting Holes: 3
Mounting Hardware Included: No
Kit Includes:- Challenger Breech Lock single stage press
- 1 Breech Lock die bushing
- A Lee Safety Scale
- Perfect Powder Measure
- Powder funnel
- Lock stud and cutter
- A Lee chamfer tool
- Primer pocket cleaner
- A large and small Safety Prime
- A tube of sizing lube
