Bullet Casting & Loading Tools & Components
LEE – Shotgun Slug Mold 7/8oz 12ga Single Cavity
Product Information
Lee mold blocks are made from aluminum because of the exceptional molding qualities. The mold cavities are lathe bored for unmatched roundness and size control. The Lee Drive Key slug is loaded in a standard trap hull with standard wad and conventional folded crimp. The exclusive drive key positively rotates the slug in rifled shotgun barrels. The key doubles as a support rib allowing the use of a standard trap wad. Mold feature self-centering automatic core pins for maximum speed and convenience. Mold includes sprue plate, handles, complete instructions and suggested loads.
LEE – UNIVERSAL CASE EXPANDING / FLARING DIE
Product Information
Gently flares the case mouth to accept cast bullets without shaving. Works great to prevent damaging the moly and low friction coatings found on today’s high performance jacketed bullets. Includes neck plugs for 22 cal through 45 cal. Works on everything from the 22 Hornet to the largest Ultra Mag.
Lee 2-Cavity Bullet Mold 401-145-SWC 40 S&W (401 Diameter) 145 Grain Semi-Wadcutter
Lee 2-Cavity Bullet Mold C429-240-SWC 44 Special, 44 Remington Mag, 44-40 WCF (429 Dia) 240gr SWC
Product Information
Lee Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition, aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lee’s weights with suggested alloy; actual weight may vary due to the alloy mixture used.
LEE BREECH LOCK BULLET SIZER KIT
Product Information
LEE BULLET SIZER & PUNCH .357 DIAMETER
Product Information
LEE BULLET SIZER & PUNCH .224 DIAMETER
Product Information
Lee .224 Bullet Sizer & Punch sizes cast bullets, also seats and crimps gas checks. Use in conjunction with the Breech Lock Bullet Sizer Kit. Fits any Breech Lock enabled reloading press.
Lee Liquid Alox, a reloading press and the Breech Lock Bullet Sizer Kit are required to utilize this kit, each sold separately.
LEE BULLET SIZER & PUNCH .298 DIAMETER
Product Information
LEE INGOT MOULD
LEE LUBE & SIZE KIT .311 DIAMETER
Product Information
The Lee Lube and Size Kit is one of the fastest and easiest ways to lubricate and size cast bullets. The sizing die that comes with the kit fits in any press that accepts standard 7/8″-14 threaded dies. Bullets are pushed through the sizing die nose first, so no special top punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container which is included and doubles as a storage case for the die.
Notes:
- Comes in red plastic case
- Lee recommends bullets be relubed after sizing to be sure the sized portion is coated.
- All lead bullets must be lubricated, but it is not absolutely necessary to size all cast bullets. Bullets must be sized if they are so large that they expand the case too much to freely enter the gun’s chamber. Sizing sometimes helps accuracy by making the bullet uniform in diameter. Sizing helps ensure uniform start pressure and better accuracy. Gas checks can be installed with this tool. Simply place the gas check on the base of the bullet before sizing.
- Lee recommends the use of Alox bullet lube, not included.
LEE LUBE & SIZE KIT .357 DIAMETER
Product Information
The Lee Size Kit is one of the fastest and easiest ways to lubricate and size cast bullets. The sizing die that comes with the kit fits in any press that accepts standard 7/8″-14 threaded dies. Bullets are pushed through the sizing die nose first, so no special top punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container which is included and doubles as a storage case for the die.
Notes:
- Comes in red plastic case
- Lee recommends bullets be relubed after sizing to be sure the sized portion is coated.
- All lead bullets must be lubricated, but it is not absolutely necessary to size all cast bullets. Bullets must be sized if they are so large that they expand the case too much to freely enter the gun’s chamber. Sizing sometimes helps accuracy by making the bullet uniform in diameter. Sizing helps ensure uniform start pressure and better accuracy. Gas checks can be installed with this tool. Simply place the gas check on the base of the bullet before sizing.
- Lee recommends the use of Alox bullet lube, not included.
LEE LUBE & SIZE KIT .401 DIAMETER
Product Information
The Lee Size Kit is one of the fastest and easiest ways to lubricate and size cast bullets. The sizing die that comes with the kit fits in any press that accepts standard 7/8″-14 threaded dies. Bullets are pushed through the sizing die nose first, so no special top punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container which is included and doubles as a storage case for the die.
Notes:
- Comes in red plastic case
- Lee recommends bullets be relubed after sizing to be sure the sized portion is coated.
- All lead bullets must be lubricated, but it is not absolutely necessary to size all cast bullets. Bullets must be sized if they are so large that they expand the case too much to freely enter the gun’s chamber. Sizing sometimes helps accuracy by making the bullet uniform in diameter. Sizing helps ensure uniform start pressure and better accuracy. Gas checks can be installed with this tool. Simply place the gas check on the base of the bullet before sizing.
- Lee recommends the use of Alox bullet lube, not included.
