Bullet Casting & Loading Tools & Components
LEE – Mould 452-200-SWC Six Cavity
LEE – MOULD TL358-158-SWC DOUBLE CAVITY
Product Information
Designed for volume production, the Lee 2-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are CNC machined for unmatched roundness and size control. Lee 2-Cavity molds come with a cam operated, hard-anodized sprue plate which is held tightly with tempered spring washers at each end. Weights given are Lee's weights with suggested alloy; actual weight may vary due to alloy mixture used. 2-Cavity Bullet Mold TL358-158-SWC 38 Special, 357 Magnum, 38 Colt New Police, 38 S&W (358 Diameter) 158 Grain Tumble Lube Semi-Wadcutter
LEE BULLET SIZE KIT .356 DIAMETER
Product Information
The Lee Size Kit is one of the fastest and easiest ways to lubricate and size cast bullets. The sizing die that comes with the kit fits in any press that accepts standard 7/8"-14 threaded dies. Bullets are pushed through the sizing die nose first, so no special top punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container which is included and doubles as a storage case for the die. Notes:- Comes in red plastic case
- Lee recommends bullets be relubed after sizing to be sure the sized portion is coated.
- All lead bullets must be lubricated, but it is not absolutely necessary to size all cast bullets. Bullets must be sized if they are so large that they expand the case too much to freely enter the gun's chamber. Sizing sometimes helps accuracy by making the bullet uniform in diameter. Sizing helps ensure uniform start pressure and better accuracy. Gas checks can be installed with this tool. Simply place the gas check on the base of the bullet before sizing.
- Lee recommends the use of Alox bullet lube, not included.
LEE BULLET SIZE KIT .358 DIAMETER
Product Information
The Lee Size Kit is one of the fastest and easiest ways to lubricate and size cast bullets. The sizing die that comes with the kit fits in any press that accepts standard 7/8"-14 threaded dies. Bullets are pushed through the sizing die nose first, so no special top punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container which is included and doubles as a storage case for the die. Notes:- Comes in red plastic case
- Lee recommends bullets be relubed after sizing to be sure the sized portion is coated.
- All lead bullets must be lubricated, but it is not absolutely necessary to size all cast bullets. Bullets must be sized if they are so large that they expand the case too much to freely enter the gun's chamber. Sizing sometimes helps accuracy by making the bullet uniform in diameter. Sizing helps ensure uniform start pressure and better accuracy. Gas checks can be installed with this tool. Simply place the gas check on the base of the bullet before sizing.
- Lee recommends the use of Alox bullet lube, not included.
LEE – 2-Cavity Bullet Mold 457-405-F 45-70 Gov’t (.457 Dia) 405gr Flat Nose
Product Information
Lee 2-Cavity Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition, aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lee’s weights with suggested alloy; actual weight may vary due to the alloy mixture used.
Technical Information:
Material: Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
Cavities: 2
Features: Tangential cut off which helps to eliminate the nip at the sprue cut off
Includes: Hardwood Handles
A note from Lee Precision on their bullet molds:
Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity, reducing the diameter of the bullets cast from the treated mold. Instead, Lee Precision recommends smoking the mold with a wooden match, beeswax candle or a butane lighter as described in their provided bullet mold instructions.
LEE – ALOX LIQUID 4oz
Product Information
Lee Liquid Alox gives better accuracy because it eliminates leading. The lube coats the entire bullet like a thin jacket and dries to a soft, varnish-like finish that really clings. The dried coating does not degrade gunpowder. Easy to apply and eliminates the need for sizing most cast bullets. Works best with micro band bullets which are designed for tumble lubing. 4 ounce dispenser bottle.
LEE – LEAD HARDNESS TESTER w/BALL INDENT/MICROSCOPE
Product Information
No more wasted components shooting too soft or too hard lead. Cast and load with confidence knowing your alloy is up to the job. Quickly and precisely check hardness of your lead alloy. Exclusive conversion chart tells the maximum operating pressure of any lead alloy. Kit includes calibrated hardened steel ball indenter "v" block cradle snaps into standard press ram 20 power 4 lens optical measuring microscope.
LEE – Lead Ladle
Product Information
Lee Precision has been making high quality reloading equipment for over 50 years. The Lead Dipper is one of those products that makes bullet casting so much easier. This ladle is the perfect size for casing bullets. The ladle holds enough lead that the molten metal stays hot enough molds will produce great bullets and the caster will not get fatigued. The ladle is also great for stirring metal alloy and skimming dross from the surface of the lead pot.
Technical Information:
Material: Iron ladle
Features: Hardwood handle
Notes: This ladle will work for left or right hand casters.
LEE – MOULD 356-125-2R DOUBLE CAVITY
Product Information
Designed for volume production, the Lee 6-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are CNC machined for unmatched roundness and size control. Lee 6-Cavity molds come with a cam operated, hard-anodized sprue plate which is held tightly with tempered spring washers at each end. Weights given are Lee's weights with suggested alloy; actual weight may vary due to alloy mixture used. 2-Cavity Bullet Mold 356-125-2R 9mm Luger, 38 Super, 380 ACP (356 Diameter) 125 Grain
LEE – Mould 452-200-SWC Double Cavity
LEE – Mould 452-255-RF Double Cavity
Product Information
Lee 2-Cavity Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition, aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lee's weights with suggested alloy; actual weight may vary due to the alloy mixture used. Technical Information: Material: Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate Cavities: 2 Features: Tangential cut off which helps to eliminate the nip at the sprue cut off Includes: Hardwood Handles 45 ACP, 45 Auto Rim, 45 Colt (Long Colt) (452 Diameter) 255 Grain Flat Nose.
LEE – Mould 452-255-RF Six Cavity
Designed for volume production, the Lee 6-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are CNC machined for unmatched roundness and size control. Lee 6-Cavity molds come with a cam operated, hard-anodized sprue plate which is held tightly with tempered spring washers at each end. Weights given are Lee’s weights with suggested alloy; actual weight may vary due to alloy mixture used.
Handles ARE NOT included (#9005).
Technical Information:
Material:
Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
Cavities: 6
Features:
•Rust resistant aluminum blocks
•Lathe bored blocks with steel bushings and alignment pins
Handles NOT included.
Handles are #9005
6-Cavity Bullet Mold TL452-230-2R 45 ACP, 45 Auto Rim, 45 Colt (Long Colt) (452 Diameter) 255 Grain Flat Nose
