Powder Measures & Scales
DILLON – RL550B/650 POWDER MEASURE
Product Information
The Dillon Precision Powder Measure for the RL 550 Series and XL 750/650 Reloading Machines represents the best in accurate, reliable and repeatable performance. Accurate to within +/- .10 grain the Dillon Powder Measure provides you with the speed and performance that the modern reloader demands. Perfect for competition reloading as well as hunting and recreational uses the Dillon Precision Powder Measure is the perfect accompaniment to The World's Finest Reloading Machines.
The powder measure is case activated; it will only drop powder if a case is present. When a case is present the powder bar will travel it's full length until is flush with the body of the powder measure. This allows the powder bar to align with the powder funnel to drop the powder charge. The case activated feature saves you from messy spills while you setup your press or if for some reason a case is not present when you cycle the press.
The Dillon Precision Powder Measure uses an adjustable volumetric powder bar to regulate charge weights. This is accomplished by adjusting a screw on the end of the powder bar which in turn regulates the size of the volume into which the powder will drop. You must use a reliable scale to set the correct charge weight as you adjust the volume the powder bar will drop. Dillon Precision manufactures four types of powder bars:
Dillon Powder Die AT 500 Standard
Dillon Powder Funnel E Metal 45 Caliber
Dillon Powder Funnel F 9mm Luger/38 Super
Hornady – Case Activated Powder Drop
Product Information:
The Hornady Case Activated Powder Drop is designed to work with the Hornady Lock-N-Load AP press, as well as, other progressive presses. The powder drop automatically dispenses a powder charge only when a case is present. The activator fits powder measures with standard 7/8-14 threaded dies. Case activated powder drop automatically dispenses a powder charge when a case is present Works with Hornady Lock-N-Load Progressive Press
Hornady – POWDER MEASURE PISTOL METERING INSERT L-N-L
Product Information
The Hornady Lock-N-Load Handgun Metering Assembly is the perfect tool for the reloader looking to improve the function of their Hornady Lock-N-Load Powder Measure. The Handgun Metering Assembly features an adjustment lock ring, which allows settings to be locked in place permanently for a favorite load. The assembly is designed to throw charges of pistol powders between 0.5 to 17 grains.
Hornady – Powder Trickler
Product Information
The Hornady Powder Trickler is ideal for getting your loads exactly the same every time, for increase accuracy. You can easily drop that last few tenths of a grain of powder into a dropped charge for the ultimate uniformity in your powder charges.
Technical Information:
Material: Plastic Base, Brass Spout
Features: Can trickle in kernels of powder at a time.
LEE – Auto-Disk Adjustable Powder Charge Bar
The Lee Auto-Disk Adjustable Powder Charge Bar is adjustable between .28 CC and 1.6 CC allowing the reloader to develop precise charges. Each adjustment line on the thimble is .1CC. This charge bar comes packaged with a volume measuring density chart for all of today's popular powders and detailed setting instructions. This is a disk with a micrometer setting on it to precisely adjust the powder charge. It is always recommended to weigh out charges.
Technical Information:
Fits:
Lee Auto-Disk Powder Measure
Function: Adjustable Charge Bar
Material: Brass and Polymer
LEE – DOUBLE DISK KIT
Product Information
For use with Lee Auto-Disk Powder Measures. Raises the hopper so you can stack two powder disks. This not only doubles the capacity of the disks but it makes very find adjustments possible. Most powders can be adjusted up or down .1 grain with different combinations of disks. Complete listing of combinations, 4 extra disks, screws and risers are included.
LEE – LONG CHARGING DIE
Product Information
Lee Long Charging Die is for use with the Auto-Disk, Pro Auto-Disk and Auto-Drum Powder Measure. Works with cases 1.760 to 2.620 inches long (223 Rem to 300 Win Mag). It works the same as the pistol powder through expanding dies except it doesn’t expand the case mouth. Rifle case expansion is normally done in the sizing die.
