Rifle & Pistol Reloading Tools & Lubes
LEE SIX PACK PRO 6000 KIT 38 SPECIAL & 357 MAG
Product Information
The culmination of nearly 40 years of progressive press design and production. Years of comments and suggestions have been incorporated into this new press.Pro 6000 Kit 38 Special & 357mag includes Six pack progressive press, Auto drum powder measure, shell plate, Universal case feed magazine, and Lee breech lock dies (full length sizing die, short charging die, easy adjust dead length bullet seating die, factory crimp die and instructions with load data).
Features:
- Six stations allow any brand of die be used -- in line bullet feed dies, powder check dies and such.
- Simple and reliable automatic indexing -- just one moving part, replaceable in seconds, no tools required and never requires adjustment.
- Stroke and clearance sufficient for largest magnum rifle cases. Uses the same all steel linkage found on our Classic Cast 50 BMG press.
- Massive 28.4mm ram glides through 82 mm of solid steel giving the ram over 7300 mm2 of solid support.
- Spent primer tube collects dirty, gritty spent primers.
- All dies securely fastened in the upper die carrier with the LEE Breech lock quick die change system. No more turret or tool head to replace or move during use.
- Automatic priming system - simple, reliable and safe with any brand or size of primer. Primes at the bottom of stroke so all six stations are available for operations.
- Automatic case inserter works with any case. Cases can be manually fed through the convenient loading port. Includes the Lee case feed magazine, works with most hand gun cases and all AR rifle cases.
- Easy to set case retainers on every station. No springs, plugs or buttons to loose or tinker with.
- Cartridge changeover in seconds, including primer size with no adjustments.
- Automatic case ejector reliably whisks away your completed round to the ammo bin. Press includes combination tool rack, bin bracket, along with free ammo bin.
LEE SIX PACK PRO 6000 KIT 44 SPECIAL & 44 MAG
Product Information
The culmination of nearly 40 years of progressive press design and production. Years of comments and suggestions have been incorporated into this new press.Pro 6000 Kit 44 SPECIAL & 44 MAG includes Six pack progressive press, Auto drum powder measure, shell plate, Universal case feed magazine, and Lee breech lock dies (full length sizing die, short charging die, easy adjust dead length bullet seating die, factory crimp die and instructions with load data).
Features:
- Six stations allow any brand of die be used -- in line bullet feed dies, powder check dies and such.
- Simple and reliable automatic indexing -- just one moving part, replaceable in seconds, no tools required and never requires adjustment.
- Stroke and clearance sufficient for largest magnum rifle cases. Uses the same all steel linkage found on our Classic Cast 50 BMG press.
- Massive 28.4mm ram glides through 82 mm of solid steel giving the ram over 7300 mm2 of solid support.
- Spent primer tube collects dirty, gritty spent primers.
- All dies securely fastened in the upper die carrier with the LEE Breech lock quick die change system. No more turret or tool head to replace or move during use.
- Automatic priming system - simple, reliable and safe with any brand or size of primer. Primes at the bottom of stroke so all six stations are available for operations.
- Automatic case inserter works with any case. Cases can be manually fed through the convenient loading port. Includes the Lee case feed magazine, works with most hand gun cases and all AR rifle cases.
- Easy to set case retainers on every station. No springs, plugs or buttons to loose or tinker with.
- Cartridge changeover in seconds, including primer size with no adjustments.
- Automatic case ejector reliably whisks away your completed round to the ammo bin. Press includes combination tool rack, bin bracket, along with free ammo bin.
LEE Six Pack PRO 6000 SHELL PLATE #11L 44 Mag, 44 Special, 45 Colt
LEE Six Pack PRO 6000 SHELL PLATE #1S 38 Special, 357 Mag,
LEE Six Pack PRO 6000 SHELL PLATE #2L 45 ACP, 458 Socom, 30-06, 308, 6.5 Creedmoor
LEE Six Pack PRO 6000 SHELL PLATE #4S 222, 223, 380 ACP
LEE SPLINE DRIVE BREECH LOCK BUSHING 4-PACK
Product Information
Spline drive Breech Lock Bushings 4 pack. New, easy grip splined drive surface allows easy, accurate and fast die installation in your press. Reloading dies are confusingly similar looking, so we anodized and colored the bushings so you can “color code” your dies for quick positive identification. No need for lock rings on your dies with these quick-change bushings. Simply lightly tighten the clamp screw, and split collar will put a vice lock on your die. Loosen the screw, and the die will spin freely. Once set you’ll never lose position. They look so good and work so well, you’ll want them for all your dies.
LEE SQUARE RATCHET
Product Information
Part TF3567 for products: 90064 CLASSIC TURRET PRESS and 90932 4 HOLE TP WI AUTO INDEX.
This part installs inside the black auto index clamp on the steel ram. The square black ratchet rides on the 1/4"x 1/4" steel index rod.
In order to maintain the integrity of the square ratchet, remember to raise the ram which disengages the ratchet from the housing and allows the index rod to spin freely. It is at this point that the Turret can be removed and installed at will. Put some household oil between the 4 hole turret and 4 hole turret ring to extend the life of your square ratchet.
LEE STEEL BASE BLOCK FOR BENCH PLATE SYSTEM
Product Information:
The Lee Reloading Bench Plate is the perfect accessory for the reloader looking to quickly change between presses on their reloading bench. The steel blank is constructed of sturdy steel, and has a black powder-coat finish for added durability. The blank has pre-drilled mounting holes that will accommodate all Lee metallic reloading presses manufactured after 2007. The base blank also has integral tabs built in on the sides to ensure proper plate retention and position in the Bench Plate, allowing you to switch presses quickly and easily on any bench or stand. This blank base only is a great addition to the Bench Plate Kit to allow the reloader to quickly swap between multiple presses or reloading equipment. Hardware for mounting one reloading press is included.
Notes: Blank is pre-drilled to fit all Lee metallic reloading presses manufactured after 2007.
LEE ULTIMATE LOCK RINGS 3-PACK
Product Information
Lee ultimate spline drive lock rings. 3 pack of gold anodized aluminum lock-rings with o-rings. One wouldn’t think you could improve on a simple thing like a lock ring, but we have. The new split clamp spline drive makes all other lock rings obsolete and clumsy to use. We started with custom extrusion of high strength aluminum with a splined exterior surface. We split the ring, and added a cross bolt that when even lightly tightened, applies a vice like grip on your dies. No tiny set screws that easily strip or damage your die threads. Then we added the famous Lee “O” ring because no matter how securely you have the lock ring clamped to the die, it will loosen in the press during operation without the friction of the “O” ring. The “O” ring allows you to finger tighten into your press and it will never loosen during operation yet you can easily remove your die with finger pressure. We have also included a handy slim profile lock ring wrench, works great when fitting dies on a turret or tool head. Dies are simply easier to install with the lock ring wrench.- Compatible with 7/8 x 14 threaded Lee reloading dies and Lee reloading presses.
- Torque type splined exterior, for a no-slip grip.
- "O" ring, anti-rotation, included. Never loosens during use.
- Lock-ring wrench included.
LEE ULTIMATE TURRET PRESS 5 HOLE TOOL HEAD
5 hole turret and index rod for the Ultimate Turret Press or Ultimate Turret Press Kits. The round tool carrier is precision machined on all surfaces. Each die position is machined to accept any Lee Breech lock bushing.
