Rifle & Pistol Reloading Components
NOSLER 7MM (.284) 160gr Sptzr BULLET Partition 50/Box
Product Information
The Nosler Partition is still the benchmark by which all modern bullets are measured. Nosler’s special lead-alloy, dual-core provides superior mushrooming characteristics at virtually all impact velocities. The fully tapered copper-alloy jacket ruptures instantly at the thin jacket mouth, yet the gradual thickening along the bullet’s axis controls expansion and curls the jacket uniformly outward at high and low velocities. Nosler’s integral partition supports the expanded mushroom and retains the rear lead-alloy core. The enclosed rear core retains more than two-thirds of the original bullet weight for deep penetration. Every Partition® bullet in the Nosler® line delivers optimum length, weight and ogive design for maximum in-flight and terminal performance. This is NOT LOADED ammunition.
Nosler Brass 375 H&H Magnum Unprimed Box of 25
Nosler Brass 45-70 50/Bag
Product Information
45/70 Govt. Premium Unprepped Bulk Brass (50ct)
Large Rifle Primer Pocket (LRP)
Nosler bulk brass was created for the high-volume hand loaders that want Nosler quality brass but want to do the case prep work themselves. Manufactured from the same quality materials and to the same tolerances allowing for extended case life and unmatched reloadability, bulk brass comes unprepped in non-weight sorted 50ct bags. Nosler bulk brass provides you with the best raw brass for creating that perfect load time and time again.
This is NOT LOADED ammunition.
Nosler Brass 6.5 Creedmoor Unprimed 50/Box
Product Information:
Manufactured with the traditional Nosler philosophy of uncompromising attention to detail, NoserCustom cartridge brass is created to exact dimensional standards and tolerances using quality materials for maximum accuracy, consistency potential and long case life. Nosler brass is full prepped and ready to reload. Case mouths are chamfered and deburred. Each case is hand inspected and weight-sorted. Flash holes are deburred and checked for proper alignment.
This is NOT LOADED ammunition.
Penner Precision 38/357 (.358) 115gr FP 100 /bag
38/357 (.358) 115gr Flat Point 100 per bag
Penner Precision is a Canadian Veteran owned company manufacturing Hi-Tek coated hard cast projectiles. Hi-Tek Supercoat was developed specifically to provide reloaders with a cast bullet that didn't smoke and gum up reloading dies like traditional wax lubed bullets. Properly applied, the coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
These bullets are cast lead coated with Hi-Tek Supercoat, which is a polymer. The alloy used for these bullets are 92% lead, 6% antimony and 2% tin, which produces bullets around 16HB hardness.
What does this mean for the reloader and shooter? Cleaner reloading dies, cleaner hands and cleaner guns, all from a highly consistent and accurate projectile manufactured right here in Alberta!
Penner Precision 38/357 (.358) 115gr FP 1000 /bag
38/357 (.358) 115gr Flat Point 1000 per bag
Penner Precision is a Canadian Veteran owned company manufacturing Hi-Tek coated hard cast projectiles. Hi-Tek Supercoat was developed specifically to provide reloaders with a cast bullet that didn't smoke and gum up reloading dies like traditional wax lubed bullets. Properly applied, the coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
These bullets are cast lead coated with Hi-Tek Supercoat, which is a polymer. The alloy used for these bullets are 92% lead, 6% antimony and 2% tin, which produces bullets around 16HB hardness.
What does this mean for the reloader and shooter? Cleaner reloading dies, cleaner hands and cleaner guns, all from a highly consistent and accurate projectile manufactured right here in Alberta!
Penner Precision 38/357 (.358) 115gr RN 100 /bag
38/357 (.358) 115gr Round Nose 100 per bag
Penner Precision is a Canadian Veteran owned company manufacturing Hi-Tek coated hard cast projectiles. Hi-Tek Supercoat was developed specifically to provide reloaders with a cast bullet that didn't smoke and gum up reloading dies like traditional wax lubed bullets. Properly applied, the coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
These bullets are cast lead coated with Hi-Tek Supercoat, which is a polymer. The alloy used for these bullets are 92% lead, 6% antimony and 2% tin, which produces bullets around 16HB hardness.
What does this mean for the reloader and shooter? Cleaner reloading dies, cleaner hands and cleaner guns, all from a highly consistent and accurate projectile manufactured right here in Alberta!
Penner Precision 38/357 (.358) 115gr RN 1000 /bag
38/357 (.358) 115gr Round Nose 1000 per bag
Penner Precision is a Canadian Veteran owned company manufacturing Hi-Tek coated hard cast projectiles. Hi-Tek Supercoat was developed specifically to provide reloaders with a cast bullet that didn't smoke and gum up reloading dies like traditional wax lubed bullets. Properly applied, the coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
These bullets are cast lead coated with Hi-Tek Supercoat, which is a polymer. The alloy used for these bullets are 92% lead, 6% antimony and 2% tin, which produces bullets around 16HB hardness.
What does this mean for the reloader and shooter? Cleaner reloading dies, cleaner hands and cleaner guns, all from a highly consistent and accurate projectile manufactured right here in Alberta!
Penner Precision 38/357 (.358) 124gr RN 100 /bag
38/357 (.358) 124gr Round Nose 100 per bag
Penner Precision is a Canadian Veteran owned company manufacturing Hi-Tek coated hard cast projectiles. Hi-Tek Supercoat was developed specifically to provide reloaders with a cast bullet that didn't smoke and gum up reloading dies like traditional wax lubed bullets. Properly applied, the coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
These bullets are cast lead coated with Hi-Tek Supercoat, which is a polymer. The alloy used for these bullets are 92% lead, 6% antimony and 2% tin, which produces bullets around 16HB hardness.
What does this mean for the reloader and shooter? Cleaner reloading dies, cleaner hands and cleaner guns, all from a highly consistent and accurate projectile manufactured right here in Alberta!
Penner Precision 38/357 (.358) 124gr RN 1000 /bag
38/357 (.358) 124gr Round Nose 1000 per bag
Penner Precision is a Canadian Veteran owned company manufacturing Hi-Tek coated hard cast projectiles. Hi-Tek Supercoat was developed specifically to provide reloaders with a cast bullet that didn't smoke and gum up reloading dies like traditional wax lubed bullets. Properly applied, the coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What does this mean for the reloader and shooter?
Cleaner reloading dies, cleaner hands and cleaner guns, all from a highly consistent and accurate projectile manufactured right here in Alberta!
Penner Precision 38/357 (.358) 147gr FP 100 /bag
38/357 (.358) 147gr Flat Point 100 per bag
Penner Precision is a Canadian Veteran owned company manufacturing Hi-Tek coated hard cast projectiles. Hi-Tek Supercoat was developed specifically to provide reloaders with a cast bullet that didn't smoke and gum up reloading dies like traditional wax lubed bullets. Properly applied, the coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
These bullets are cast lead coated with Hi-Tek Supercoat, which is a polymer. The alloy used for these bullets are 92% lead, 6% antimony and 2% tin, which produces bullets around 16HB hardness.
What does this mean for the reloader and shooter? Cleaner reloading dies, cleaner hands and cleaner guns, all from a highly consistent and accurate projectile manufactured right here in Alberta!
Penner Precision 38/357 (.358) 147gr FP 1000 /bag
38/357 (.358) 147gr Flat Point 1000 per bag
Penner Precision is a Canadian Veteran owned company manufacturing Hi-Tek coated hard cast projectiles. Hi-Tek Supercoat was developed specifically to provide reloaders with a cast bullet that didn't smoke and gum up reloading dies like traditional wax lubed bullets. Properly applied, the coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
These bullets are cast lead coated with Hi-Tek Supercoat, which is a polymer. The alloy used for these bullets are 92% lead, 6% antimony and 2% tin, which produces bullets around 16HB hardness.
What does this mean for the reloader and shooter? Cleaner reloading dies, cleaner hands and cleaner guns, all from a highly consistent and accurate projectile manufactured right here in Alberta!
