Rifle & Pistol Reloading Components
NOSLER 338 (.338) 300gr HPBT BULLET CUSTOM 100/Box
Product Information
Nosler® has blended the accuracy of its Custom Competition™ bullet jackets with its own ultra-precise, lead-alloy cores to create the performance standard for match rifle and pistol bullets. The hollow point provides a small meplat for reduced drag and increased aerodynamic efficiency while the pronounced boat-tail design provides efficient flight characteristics over a wide range of velocities.
This is NOT LOADED ammunition.
NOSLER 6.5MM (.264) 140gr Sptz BULLET Partition 50/Box
Product Information
The Nosler Partition is still the benchmark by which all modern bullets are measured. Nosler’s special lead-alloy, dual-core provides superior mushrooming characteristics at virtually all impact velocities. The fully tapered copper-alloy jacket ruptures instantly at the thin jacket mouth, yet the gradual thickening along the bullet’s axis controls expansion and curls the jacket uniformly outward at high and low velocities. Nosler’s integral partition supports the expanded mushroom and retains the rear lead-alloy core. The enclosed rear core retains more than two-thirds of the original bullet weight for deep penetration. Every Partition® bullet in the Nosler® line delivers optimum length, weight and ogive design for maximum in-flight and terminal performance. This is NOT LOADED ammunition.
NOSLER 6.5MM (.264)100gr Sptz BULLET BallisticTip 50/Box
Product Information
The more you hunt, the more you start to realize how unpredictable and unforgiving nature can be, which is why we engineered the Ballistic Tip® Hunting bullet to be very predictable and extremely forgiving. Whether you’re after Whitetails, Blacktails, Mulies or Pronghorns, Ballistic Tip® bullets deliver the kind of accuracy, consistency and down-range punch required for putting down that buck in any situation. The combination of performance and versatility that Nosler® has built into these bullets has resulted in over 25 years of successful hunts for sportsmen across the country – and around the world.
These bullets deliver the accuracy, consistency and down-range punch required for clean kills in all situations. These flat-shooting, wind-defying bullets utilize ballistic-designed boat-tails and polymer tips to increase long-range efficiency and protect against tip damage in the magazine. Unique tapered jacket provides controlled expansion at all practical ranges and velocities.
This is NOT LOADED ammunition.
NOSLER 6.5MM (.264)140gr Sptz BULLET AccuBond 50/Box
Product Information:
Through an exclusive bonding process that eliminates voids in the bullet core, AccuBond® couples Nosler's proven copper-alloy jacket with its special lead-alloy core. The result is a bullet that flies true, penetrates deep and retains its weight, without causing extensive barrel fouling. The unique white polymer tip resists deforming and initiates expansion on impact. Nosler's Solid Base® at the rear of the bullet acts as a platform for large diameter mushrooms.
This is NOT LOADED ammunition.
NOSLER 6.5MM(.264)150gr SP BULLET AccuBond-LR 100/Box
Product Information:
The Nosler AccuBond®-Long Range (LR) bullet line was developed in response to the escalating demand from long-range hunters asking for a hunting bullet that could keep up with today’s level of high-grade optics and ultra-high velocity cartridges in order to stretch practical shooting yardages past 1,000 yards; yet still perform on big-game animals.
The unique tapered jacket and proprietary bonding process of the AccuBond®-Long Range (LR) bullet permits rapid expansion for effective energy transfer and maximum weight retention allowing for deep penetration and significant tissue damage across a broad range of velocities. Engineered for devastating performance at all practical distances, the bullet’s sleek, high-performance boat-tail base combined with the polymer tip and long ogive provides accuracy, consistency and the down range punch necessary for clean kills in any situation. Holding up to the most extreme velocities, Nosler’s AccuBond®-Long Range (LR) bullet is built to perform.
This is NOT LOADED ammunition.
NOSLER 7MM (.284) 150gr Sptzr BULLET BallisticTip 50/Box
Product Information
The more you hunt, the more you start to realize how unpredictable and unforgiving nature can be, which is why we engineered the Ballistic Tip® Hunting bullet to be very predictable and extremely forgiving. Whether you’re after Whitetails, Blacktails, Mulies or Pronghorns, Ballistic Tip® bullets deliver the kind of accuracy, consistency and down-range punch required for putting down that buck in any situation. The combination of performance and versatility that Nosler® has built into these bullets has resulted in over 25 years of successful hunts for sportsmen across the country – and around the world.
These bullets deliver the accuracy, consistency and down-range punch required for clean kills in all situations. These flat-shooting, wind-defying bullets utilize ballistic-designed boat-tails and polymer tips to increase long-range efficiency and protect against tip damage in the magazine. Unique tapered jacket provides controlled expansion at all practical ranges and velocities.
This is NOT LOADED ammunition.
NOSLER 7MM (.284) 160gr Sptzr BULLET Partition 50/Box
Product Information
The Nosler Partition is still the benchmark by which all modern bullets are measured. Nosler’s special lead-alloy, dual-core provides superior mushrooming characteristics at virtually all impact velocities. The fully tapered copper-alloy jacket ruptures instantly at the thin jacket mouth, yet the gradual thickening along the bullet’s axis controls expansion and curls the jacket uniformly outward at high and low velocities. Nosler’s integral partition supports the expanded mushroom and retains the rear lead-alloy core. The enclosed rear core retains more than two-thirds of the original bullet weight for deep penetration. Every Partition® bullet in the Nosler® line delivers optimum length, weight and ogive design for maximum in-flight and terminal performance. This is NOT LOADED ammunition.
Nosler Brass 257 Roberts +P Unprimed Box of 50
Nosler Brass 375 H&H Magnum Unprimed Box of 25
Nosler Brass 6.5 Creedmoor Unprimed 50/Box
Product Information:
Manufactured with the traditional Nosler philosophy of uncompromising attention to detail, NoserCustom cartridge brass is created to exact dimensional standards and tolerances using quality materials for maximum accuracy, consistency potential and long case life. Nosler brass is full prepped and ready to reload. Case mouths are chamfered and deburred. Each case is hand inspected and weight-sorted. Flash holes are deburred and checked for proper alignment.
This is NOT LOADED ammunition.
Penner Precision 38/357 (.358) 115gr FP 100 /bag
38/357 (.358) 115gr Flat Point 100 per bag
Penner Precision is a Canadian Veteran owned company manufacturing Hi-Tek coated hard cast projectiles. Hi-Tek Supercoat was developed specifically to provide reloaders with a cast bullet that didn't smoke and gum up reloading dies like traditional wax lubed bullets. Properly applied, the coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
These bullets are cast lead coated with Hi-Tek Supercoat, which is a polymer. The alloy used for these bullets are 92% lead, 6% antimony and 2% tin, which produces bullets around 16HB hardness.
What does this mean for the reloader and shooter? Cleaner reloading dies, cleaner hands and cleaner guns, all from a highly consistent and accurate projectile manufactured right here in Alberta!
Penner Precision 38/357 (.358) 115gr RN 100 /bag
38/357 (.358) 115gr Round Nose 100 per bag
Penner Precision is a Canadian Veteran owned company manufacturing Hi-Tek coated hard cast projectiles. Hi-Tek Supercoat was developed specifically to provide reloaders with a cast bullet that didn't smoke and gum up reloading dies like traditional wax lubed bullets. Properly applied, the coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
These bullets are cast lead coated with Hi-Tek Supercoat, which is a polymer. The alloy used for these bullets are 92% lead, 6% antimony and 2% tin, which produces bullets around 16HB hardness.
What does this mean for the reloader and shooter? Cleaner reloading dies, cleaner hands and cleaner guns, all from a highly consistent and accurate projectile manufactured right here in Alberta!
