Rifle & Pistol Reloading Tools & Lubes
LEE 7.62x54R QUICK TRIM DIE
Product Information
This is a trim die only for the Deluxe Quick Trim Case Trimmer and Value Trim Case Trimmer, both sold separately. With the addition of either of these tools, simply install the appropriate quick trim die in your press and start trimming. No calipers, measurement or adjustment required. Simply install the appropriate quick trim die in your press and start trimming. A click adjustable stop allows trim length adjustment in .001 of an inch increments. Allows the user to shorten case to a uniform shorter length than standard, reducing trimming frequency.Note:
Requires the purchase of either the Lee Deluxe Quick Trim Case Trimmer 717013 or the Lee Value Trim Case Trimmer 982472
Technical Information:
Dies Included: Quick Trim Die.
Die Size: Standard 7/8"-14 threaded die
Shellholder Required: Yes
Shellholder Included: No
Accessories Included: Plastic Die Box
Notes: Handgun calibers do not come with a die locking ring as it is only needed for the rifle dies.
LEE 7MM REMINGTON MAG 3 DIE SET w/FACTORY CRIMP, S/H #5
LEE 7MM REMINGTON MAG CS LENGTH GAUGE & SHELLHOLDER
Product Information:
The simplest way to check the case and trim to the correct safe length is with a Lee Case Trimmer. After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. The Cutter and Lock Stud (sold separately) works for all calibers. The Case Length Gauge (Pilot) and Shell Holder must be ordered for each caliber. Trim cases by hand or electrically. Can be used with an elecrtric drill to trim, chamfer and polish cases faster. Eliminates danger of long cases. Squares the mouth for more accurate bullet seating and exit. Includes Case Length Gauge and Shellholder only.
LEE 7MM-08 REMINGTON 3 DIE SET w/FACTORY CRIMP, S/H #2
Product Information
Lee PaceSetter Dies now include the exclusive Lee Factory Crimp Die to produce factory-like ammunition with improved utility and accuracy. The die set also includes a conventional bullet seater and roll crimper. You can choose the type of crimp you desire. They also include a shell holder, powder dipper, load data and storage box.
LEE 7MMx57 MAUSER COLLET NECK DIE SET, S/H #2
LEE 7MMx57 MSR CASE LENGTH GAUGE & SHELLHOLDER
Product Information
The simplest way to check the case and trim to the correct safe length is with a Lee Case Trimmer. After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. The Cutter and Lock Stud (sold separately) works for all calibers. The Case Length Gauge (Pilot) and Shell Holder must be ordered for each caliber. Trim cases by hand or electrically. Can be used with an elecrtric drill to trim, chamfer and polish cases faster. Eliminates danger of long cases. Squares the mouth for more accurate bullet seating and exit. Includes Case Length Gauge and Shellholder only.
LEE 8X56R MAN FACTORY CRIMP DIE
Product Information
Lee 8X56R Factory Crimp Die (custom over-run) crimps the bullet in place more firmly than any other tool. Tests demonstrate that even bullets which have no crimp groove will shoot more accurately. A firm crimp improves accuracy because pressure must build to a higher level before the bullet begins to move. This higher start pressure insures a more uniform pressure curve and less velocity variation.
LEE 9.3X62 MSR CASE LENGTH GAUGE & SHELLHOLDER
Product Information
The simplest way to check the case and trim to the correct safe length is with a Lee Case Trimmer. After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. The Cutter and Lock Stud (sold separately) works for all calibers. The Case Length Gauge (Pilot) and Shell Holder must be ordered for each caliber. Trim cases by hand or electrically. Can be used with an electric drill to trim, chamfer and polish cases faster. Eliminates danger of long cases. Squares the mouth for more accurate bullet seating and exit. Includes Case Length Gauge and Shellholder only.
LEE APP BULGE BUSTER KIT w/o CARBIDE FACTORY CRIMP
Product Information
The Lee App Bulge Buster Kit and the appropriate Lee Carbide Factory Crimp Die, restore free function of rimless cases that have low base bulges. Low base bulges usually occur from chambers that do not fully support the cartridge or cases resized in carbide dies from manufacturers other than Lee. These show a noticeable stop ring near the base. You will most likely find cases with these problems in mixed range brass.
**Will work with the following cases:
- 380 ACP
- 10mm
- 40 S&W
- 41 AE (Use 40 S&W Factory Crimp Die)
- 45 ACP
- 45 GAP
- 45 Win Mag
The Lee Carbide Factory Crimp Die must be purchased separately.Â
LEE APP PRIMER POCKET SWAGE KIT
Product Information:
- Spring assisted case extraction with integrated case guide.
- Removes the military crimp from the primer pocket while swaging the primer pocket of your brass.
- Leaves a nice smooth entry radius for new primer.
- Easy to adjust
- No shell holder required
- Only adjustment necessary is to change primer size.
- Includes swage push die, swage holder, push rod, small swage punch and large punch, and shell holder adapter.
LEE APP ROLLER HANDLE UNGRADE KIT
LEE AUTO BREECH LOCK PRO 4000 KIT 223 REMINGTON
- Easy to use with no adjustments
- Modular construction allows as much or as little automation as the operator desires with no adjustments
- Cartridge changeover in seconds, including primer size with no adjustments
- Breech Lock quick change feature in all four positions with no adjustments
- Exclusive auto case placer with no adjustments
- Through ram primer disposal with convenient built-in primer disposal tube
- Includes four colored spline drive breech lock bushings
- Includes large and small priming arms
- Includes ergonomic, wood grip roller handle
- Includes hex wrench for caliber changes with built in storage rack for tools
