Rifle & Pistol Reloading Tools & Lubes
LEE – SAFETY PRIMER FEED COMBO (LARGE & SMALL)
Product Information
Makes priming on the press a delight. Never touch the primers from box to shell. Primer flip tray features a CAD designed flipping surface that instantly rights the primers. Change primer size in seconds. Primers are dispensed with a satisfying click of the primer feed trigger. Use any brand of primers because the priming operation is remote from the feeder. Works on all presses that have the Lever Prime System (LPS).
LEE – SHELLHOLDER SET 11 S/H’s for PRESS/AP-II (GREEN BOX)
Product Information
This kit comes packaged with eleven of the most popular size shellholders to fit over 115 different cartridges. These hardened steel shellholders are compatible with most single stage and turret presses. Will not function with the Lee Auto Prime Hand Priming Tool. Packed in plastic storage box with Shellholder Fit chart. Technical Information Notes: •Includes shellholders: #1, #2, #3, #4, #5, #7, #8, #9, #10, #11 and #19 Shell Holder Calibers 1 = 22 Remington Jet, 256 Winchester magnum, 38 S&W, 38 Colt N.P., 38 Short Colt, 38 Long Colt, 38 Special, 357 Magnum, 41 Long Colt 2 = 22 BR, 224 Clark, 22-250 Remington, 240 Weatherby, 243 Winchester, 6mm Remington, 244 Remington, 6mm International, 6mm-284, 6mm-06, 25-06 Remington, 250 Savage, 257 Roberts, 6.5 Carcano, 270 Winchester, 280 Remington, 7mm-08 Remington, 7mm BR, 7x57mm Mauser, 284 Winchester, 300 savage, 308 Winchester, 30-06 Springfield, 7.7 Jap., 8 x 57 Mauser, 8mm-06, 35 Remington, 35 Whelen, 358 Winchester, 357 Auto mag., 44 Auto mag., 45 Auto 3 = 22 Savage, 219 Zipper, 25-35 Winchester, 6.5 x 55 Mauser, 7 x 30 Waters, 7.5 Schmidt Rubin, 7.65 x 53 Argentine Mauser, 30 Herrett, 30-30 Winchester, 32 Winchester special, 32-40 Winchester, 356 Winchester, 375 Winchester, 38-55 Winchester, 458 Winchester magnum 4 = 17 Remington, 204 Ruger, 221 Fireball, 222 Remington, 223 Remington, 222 Remington magnum, 7mm TCU, 32 Short Colt, 32 Long Colt, 32 S&W, 380 Auto 5 = 223WSSM, 243 WSSM, 257 Weatherby, 264 Winchester magnum, 270 Weatherby, 270WSM, 7x61 Sharpe & Hart, 7mm Remington magnum, 7mm WSM, 7mm Weatherby, 7mm Reminton Ultra magnum, 300 winchester magnum, 300 H&H, 300 WSM, 300 Weatherby, 300 Remington Ultra magnum, 308 Norma magnum, 303 British, 8mm remington magnum, 338 Winchester magnum, 340 weatherby, .338 Remington Ultra magnum, 35 Winchester, 350 Remington magnum, 358 Norma magnum, 375 H&H, 375 Weatherby, 375 Reminton Ultra magnum, 416 Remington magnum, 458 Winchester magnum, 475 Linebaugh 7 = 30 Carbine, 32 Auto 8 = 33 Winchester, 348 Winchester, 40-82 Winchester, 45-70 Gov’t 9 = 41 Magnum 10 = 220 Swift,225 Winchester, 6.5 Jap. 11 = 444 Marlin, 44S&W special, 44 Magnum, 45 Colt, 454 Casull 19 = 30 Luger, 30 Mauser, 9mm Luger, 38 Super Auto, 38 Auto, 40 S&W, 10mm Auto, 41 Action Express
LEE – Steel 45-70 3 DIE SET w/PWD thru Expand Die w/Dipper & #R8 S/H
LEE – TOKAREV/30 MSR FACTORY CRIMP DIE
LEE – TURRET 3-HOLE FOR TURRET PRESS/PRO 1000
LEE – TURRET 4-HOLE FOR TURRET PRESS
Product Information
The Lee Turret Press is a proven design utilizing replaceable turrets that lock into a solid steel ring. One of the best features is the ability to simply lift out an entire turret and replace it with the another turret setup to load a different caliber. These extra turrets give reloaders the ability to have all of their different calibers on a different turret ready to load. Technical Information: Fits: Lee 4 Hole, Classic 4 Hole Turret Press Function: Replacement Turret Notes: 7/8"-14 Threaded dies
LEE – Undersized Carbide Sizing Die 40 S&W
Product Information
Lee U Carbide Small Base Sizing Dies are great for reloaders looking for ultimate feeding reliability in their handgun. These dies undersize brass between .002" and .003" smaller than other Lee Carbide Sizing dies. Ammunition with undersized brass cases will chamber each and every time it is loaded out of a magazine giving reliable chambering each time a round is stripped out of the magazine or loaded into a cylinder. Competition shooters rely on having ammunition that will feed and chamber each round of ammunition as it is stripped out of the magazine. One of the other benefits reloaders have reported when using Lee U dies is increased consistency and accuracy in loaded rounds because these dies help increase and provide more consistent neck tension on loaded bullets. The solid carbide insert inside of these dies is ground to a special contour that does not leave a belt mark on the case. These carbide dies do not require lubricant while resizing, though a little case lube will make the sizing process easier. Shellholder sold separately. Technical Information: Material: Steel Die Type: U Carbide Small Base Sizing Die Accessories: Plastic Storage Container Notes: •Carbide sizing dies do not require case lube •Undersized dies size brass between .002" and .003" below SAAMI specifications, so ammunition will feed in chamber in tight chambers •Undersized dies work great for bringing back case tension to hold bullets on cases that may be thinner walled
LEE – Undersized Carbide Sizing Die 45acp
Product Information
Lee U Carbide Small Base Sizing Dies are great for reloaders looking for ultimate feeding reliability in their handgun. These dies undersize brass between .002" and .003" smaller than other Lee Carbide Sizing dies. Ammunition with undersized brass cases will chamber each and every time it is loaded out of a magazine giving reliable chambering each time a round is stripped out of the magazine or loaded into a cylinder. Competition shooters rely on having ammunition that will feed and chamber each round of ammunition as it is stripped out of the magazine. One of the other benefits reloaders have reported when using Lee U dies is increased consistency and accuracy in loaded rounds because these dies help increase and provide more consistent neck tension on loaded bullets. The solid carbide insert inside of these dies is ground to a special contour that does not leave a belt mark on the case. These carbide dies do not require lubricant while resizing, though a little case lube will make the sizing process easier. Shellholder sold separately. Technical Information: Material: Steel Die Type: U Carbide Small Base Sizing Die Accessories: Plastic Storage Container Notes: •Carbide sizing dies do not require case lube •Undersized dies size brass between .002" and .003" below SAAMI specifications, so ammunition will feed in chamber in tight chambers •Undersized dies work great for bringing back case tension to hold bullets on cases that may be thinner walled
LEE – Undersized Carbide Sizing Die 9mm Luger
Product Information
Lee U Carbide Small Base Sizing Dies are great for reloaders looking for ultimate feeding reliability in their handgun. These dies undersize brass between .002″ and .003″ smaller than other Lee Carbide Sizing dies. Ammunition with undersized brass cases will chamber each and every time it is loaded out of a magazine giving reliable chambering each time a round is stripped out of the magazine or loaded into a cylinder. Competition shooters rely on having ammunition that will feed and chamber each round of ammunition as it is stripped out of the magazine. One of the other benefits reloaders have reported when using Lee U dies is increased consistency and accuracy in loaded rounds because these dies help increase and provide more consistent neck tension on loaded bullets. The solid carbide insert inside of these dies is ground to a special contour that does not leave a belt mark on the case. These carbide dies do not require lubricant while resizing, though a little case lube will make the sizing process easier. Shellholder sold separately.
Technical Information:
Material: Steel
Die Type: U Carbide Small Base Sizing Die
Accessories: Plastic Storage Container
Notes:
•Carbide sizing dies do not require case lube
•Undersized dies size brass between .002″ and .003″ below SAAMI specifications, so ammunition will feed in chamber in tight chambers
•Undersized dies work great for bringing back case tension to hold bullets on cases that may be thinner walled
LEE – UNIVERSAL DECAPPING DIE FOR UNDERSIZE FLASH HOLE
LEE 1 1/4″-12 BREECH LOCK UPDATE KIT 1.25×12 THREAD
Product Information
- 1 1/4"-12 breech lock adapter
- Spline drive lock-ring eliminator
- Lock-ring wrench
- Lee Precision Classic Cast®
- Hornady® Iron®
- Hornady® Classic™ / Lock-N-Load®
- RCBS Rock Chucker® Supreme
- Redding Big Boss®
- Redding® 700 Ultramag
- ..and more (verify your removable press bushing/adapter size is 1 1/4"-12)
LEE 22 HORNET CASE LENGTH GAUGE & SHELLHOLDER
Product Information
The simplest way to check the case and trim to the correct safe length is with a Lee Case Trimmer. After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. The Cutter and Lock Stud (sold separately) works for all calibers. The Case Length Gauge (Pilot) and Shell Holder must be ordered for each caliber. Trim cases by hand or electrically. Can be used with an elecrtric drill to trim, chamfer and polish cases faster. Eliminates danger of long cases. Squares the mouth for more accurate bullet seating and exit. Includes Case Length Gauge and Shellholder only.
