Case Prep Tools & Lubes
LEE 7.62x54R QUICK TRIM DIE
Product Information
This is a trim die only for the Deluxe Quick Trim Case Trimmer and Value Trim Case Trimmer, both sold separately. With the addition of either of these tools, simply install the appropriate quick trim die in your press and start trimming. No calipers, measurement or adjustment required. Simply install the appropriate quick trim die in your press and start trimming. A click adjustable stop allows trim length adjustment in .001 of an inch increments. Allows the user to shorten case to a uniform shorter length than standard, reducing trimming frequency.Note:
Requires the purchase of either the Lee Deluxe Quick Trim Case Trimmer 717013 or the Lee Value Trim Case Trimmer 982472
Technical Information:
Dies Included: Quick Trim Die.
Die Size: Standard 7/8"-14 threaded die
Shellholder Required: Yes
Shellholder Included: No
Accessories Included: Plastic Die Box
Notes: Handgun calibers do not come with a die locking ring as it is only needed for the rifle dies.
LEE 7MM REMINGTON MAG CS LENGTH GAUGE & SHELLHOLDER
Product Information:
The simplest way to check the case and trim to the correct safe length is with a Lee Case Trimmer. After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. The Cutter and Lock Stud (sold separately) works for all calibers. The Case Length Gauge (Pilot) and Shell Holder must be ordered for each caliber. Trim cases by hand or electrically. Can be used with an elecrtric drill to trim, chamfer and polish cases faster. Eliminates danger of long cases. Squares the mouth for more accurate bullet seating and exit. Includes Case Length Gauge and Shellholder only.
LEE 7MMx57 MSR CASE LENGTH GAUGE & SHELLHOLDER
Product Information
The simplest way to check the case and trim to the correct safe length is with a Lee Case Trimmer. After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. The Cutter and Lock Stud (sold separately) works for all calibers. The Case Length Gauge (Pilot) and Shell Holder must be ordered for each caliber. Trim cases by hand or electrically. Can be used with an elecrtric drill to trim, chamfer and polish cases faster. Eliminates danger of long cases. Squares the mouth for more accurate bullet seating and exit. Includes Case Length Gauge and Shellholder only.
LEE 9.3X62 MSR CASE LENGTH GAUGE & SHELLHOLDER
Product Information
The simplest way to check the case and trim to the correct safe length is with a Lee Case Trimmer. After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. The Cutter and Lock Stud (sold separately) works for all calibers. The Case Length Gauge (Pilot) and Shell Holder must be ordered for each caliber. Trim cases by hand or electrically. Can be used with an electric drill to trim, chamfer and polish cases faster. Eliminates danger of long cases. Squares the mouth for more accurate bullet seating and exit. Includes Case Length Gauge and Shellholder only.
LEE APP PRIMER POCKET SWAGE KIT
Product Information:
Formerly known as product # 91582
- Spring assisted case extraction with integrated case guide.
- Removes the military crimp from the primer pocket while swaging the primer pocket of your brass.
- Leaves a nice smooth entry radius for new primer.
- Easy to adjust
- No shell holder required
- Only adjustment necessary is to change primer size.
- Includes swage push die, swage holder, push rod, small swage punch and large punch, and shell holder adapter.
LEE PRIMER POCKET RAM SWAGE for SINGLE STAGE PRESS
Product Information:
The Lee Ram Swage works on all single stage presses that have 7/8”-14 threads in the press frame, and accept universal press shell-holders.
Features spring assisted case extraction, and an all steel case guide, ensures cases will be positively centered on push rod.
Shell-holderless design, allows you to swage any small or large primer pocket, without swapping to a different size shell-holder.
Primer pocket swaging is necessary when reloading brass that have crimped primer pockets, most cases used in military or non civilian applications have this crimp. Typical cases that you will encounter primer pocket crimps are 45 ACP, 223(5.56mm), 30-06, 308(7.62x51), 9mm Luger and special law enforcement 40 S&W.
- The hardened steel swage punch is automatically extracted from the primer pocket by five 400 pound force disc springs.
- Swage holder, large or small, installs in seconds into your press ram with no adjustments required.
- Primer pocket swaging is so fast you’ll want to swage all range brass.
- Nothing reduces priming problems on a progressive press more than properly swaged primer pockets. Surplus military and police department brass is a great low cost source of cases.
Lee Quick Trim Die 6.5mm Grendel
Product Information
This is a trim die only for the Deluxe Quick Trim Case Trimmer and Value Trim Case Trimmer, both sold separately. With the addition of either of these tools, simply install the appropriate quick trim die in your press and start trimming. No calipers, measurement or adjustment required. Simply install the appropriate quick trim die in your press and start trimming. A click adjustable stop allows trim length adjustment in .001 of an inch increments. Allows the user to shorten case to a uniform shorter length than standard, reducing trimming frequency. Note: Requires the purchase of either the Lee Deluxe Quick Trim Case Trimmer 717013 or the Lee Value Trim Case Trimmer 982472 Technical Information: Dies Included: Quick Trim Die. Die Size: Standard 7/8"-14 threaded die Shellholder Required: Yes Shellholder Included: No Accessories Included: Plastic Die Box Notes: Handgun calibers do not come with a die locking ring as it is only needed for the rifle dies.
Lyman – PRIMER POCKET REAMER LARGE
Lyman – PRIMER POCKET UNIFORM TOOL SMALL
Lyman – PRIMER POCKET UNIFORMER TOOL LARGE
Product Information
This precision tool allows reloaders to assure uniform primer depth which produces consistent ignition and improves accuracy. Uniforming tool has a pre-set stop collar set to SAAMI specs. Reloader simply inserts and turns. Available in large and small sizes. (For rifle cases only)
LYMAN CASE PREP MULTI-TOOL
Product Information
The Lyman Case Prep Multi-Tool is a unique case prep tool that provides the reloader with all the essential case prep accessories in one compact, double-ended storage tool. This makes it a great tool for any reloader looking for a hand held tool that will chamfer for very low drag bullets, debur cases, clean large and small primer pockets and remove military crimps from large and small primer pockets. Other unique features of the tool include knurled handle to ensure a secure grip, a two-piece design for handy storage in the middle of the tool and both ends are threaded to allow two tool heads to be mounted simultaneously streamlining the case preparation process. Kit Includes:- Large and small primer pocket reamers
- Large and small primer pocket cleaners
- Outside deburring tool
- Inside VLD (very low drag) chamfering tool
