RCBS Powder Trickler 2
$53.00
Today’s trend is to use electronic scales to measure powder charges. Many of these scales have scale pans that are positioned out of reach of existing powder tricklers.
The Powder Trickler—2 solves this problem by adding a height adjustable, non-skid base and powder tube extension.
2 in stock
The RCBS Powder Trickler is a great tool for any reloader looking to trickle small amounts of powder into their powder pan for fine tuning to the last grain of powder to get the perfect charge weight.
Technical Information:
Material: Cast Aluminum
Features: Stable base
| Weight | .5 lbs |
|---|
Related products
LEE – DOUBLE DISK KIT
Product Information
For use with Lee Auto-Disk Powder Measures. Raises the hopper so you can stack two powder disks. This not only doubles the capacity of the disks but it makes very find adjustments possible. Most powders can be adjusted up or down .1 grain with different combinations of disks. Complete listing of combinations, 4 extra disks, screws and risers are included.LEE – LONG CHARGING DIE
Product Information
Lee Long Charging Die is for use with the Auto-Disk, Pro Auto-Disk and Auto-Drum Powder Measure. Works with cases 1.760 to 2.620 inches long (223 Rem to 300 Win Mag). It works the same as the pistol powder through expanding dies except it doesn’t expand the case mouth. Rifle case expansion is normally done in the sizing die.
LEE – PRO AUTO-DISK POWDER MEASURE
Product Information
The Lee Pro Auto-Disk powder measure is perfect for the high volume reloader utilizing a progressive reloading press. The innovative design will not cut powder and almost totally eliminates leakage, the large hopper with shut-off valve is attached with brass thumb nuts for the ultimate in disk changing convenience. The positive pull-back lever increases safety. Comes with four disks, swivel adapter and spring return lever with spring. Designed to be mounted on the Lee Pro-1000 and Loadmaster presses with Lee powder-through expander dies.Lee Auto-Disk, Auto-Drum Rifle Powder Short Charging Die
Product Information
The Lee Short Charging Die is for use with the Lee Auto-Disk, Pro Auto-Disk and Auto-Drum Powder Measure. Designed to work with cases .860 to 1.760 inches long (22 Hornet to 223 Rem), and bullet diameter .223 and larger due to powder bridging. The rifle charging die works the same as the pistol powder through expanding die, except it doesn't expand the case mouth. Rifle case expansion is done in the sizing die. For cases 1.760 to 2.620 inches long, use the long charging die. Steel die comes packaged in a plastic storage case.Lee Powder Measure Stand
LEE QUICK CHANGE DRUM SET FOR CLASSIC OR AUTO DRUM
Product Information
Quick Change Drum Set can be used in conjunction with the Deluxe Perfect Powder Measure, Auto Drum Powder Measure and the now discontinued Classic Powder Measure. All drums are infinitely adjustable within range. No tools are required for adjustment. A graduated adjsutment key iincluded with each drum. Each turn of the adjusting screw is .1cc or about 1 grain of powder. Each key is marked with .01cc graduations allowing easy 1/10 grain powder adjustments. Quickly set your charge, and mark it and the powder type on the flat of the drum set for easy reference for future reloading. Features four precision molded nylon drums: (2) small drums for charging 25 ACP to 223 Remington (2) large drums for charging the 223 Remington to Large Magnums. Also include an insert to allow reduced capacity charging similar to smaller drum.Lyman Pocket Touch Electronic Powder Scale 1500 Grain Capacity
Product Information:
RCBS 1500 GRAIN DIGITAL POCKET SCALE
Product Information
- 1500 Grain Capacity
- 0.10 Grain Accuracy
- Easy to Read Digital Display
- Rugged Design
- Powered by 2-AAA Batteries (Included)
- Check weight and Powder Pan Included
- One Year Warranty from the Manufacturer
