LEE – PERFECT POWDER MEASURE (2gr-100gr)
$42.00
Product Information
The Lee Perfect Powder Measure features a soft elastomer wiper that eliminates cut powder and jerky action. The smooth rotor operation results in incredibly uniform charges. A nylon cone shaped drum is self-lubricating so it will never bind or wear out. The micrometer adjustment reads directly in cubic centimeters. Just multiply the charge in grains by the cc for one grain and you have the setting. Works fine for charges from 2 grains to over 100 grains. Changing powder is fast and easy with the removable hopper. With the optional Universal Charging Die, the powder measure becomes case operated. Includes adapters to fit almost all cartridges.
2 in stock
Product Information
The Lee Perfect Powder Measure features a soft elastomer wiper that eliminates cut powder and jerky action. The smooth rotor operation results in incredibly uniform charges. A nylon cone shaped drum is self-lubricating so it will never bind or wear out. The micrometer adjustment reads directly in cubic centimeters. Just multiply the charge in grains by the cc for one grain and you have the setting. Works fine for charges from 2 grains to over 100 grains. Changing powder is fast and easy with the removable hopper. With the optional Universal Charging Die, the powder measure becomes case operated. Includes adapters to fit almost all cartridges.
| Weight | 1.5 lbs |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
Hornady – Powder Trickler
Product Information
The Hornady Powder Trickler is ideal for getting your loads exactly the same every time, for increase accuracy. You can easily drop that last few tenths of a grain of powder into a dropped charge for the ultimate uniformity in your powder charges. Technical Information: Material: Plastic Base, Brass Spout Features: Can trickle in kernels of powder at a time.
LEE – Auto-Disk Adjustable Powder Charge Bar
LEE – DOUBLE DISK KIT
Product Information
For use with Lee Auto-Disk Powder Measures. Raises the hopper so you can stack two powder disks. This not only doubles the capacity of the disks but it makes very find adjustments possible. Most powders can be adjusted up or down .1 grain with different combinations of disks. Complete listing of combinations, 4 extra disks, screws and risers are included.
LEE – LONG CHARGING DIE
Product Information
Lee Long Charging Die is for use with the Auto-Disk, Pro Auto-Disk and Auto-Drum Powder Measure. Works with cases 1.760 to 2.620 inches long (223 Rem to 300 Win Mag). It works the same as the pistol powder through expanding dies except it doesn’t expand the case mouth. Rifle case expansion is normally done in the sizing die.
LEE – PRO AUTO-DISK POWDER MEASURE
Product Information
The Lee Pro Auto-Disk powder measure is perfect for the high volume reloader utilizing a progressive reloading press. The innovative design will not cut powder and almost totally eliminates leakage, the large hopper with shut-off valve is attached with brass thumb nuts for the ultimate in disk changing convenience. The positive pull-back lever increases safety. Comes with four disks, swivel adapter and spring return lever with spring. Designed to be mounted on the Lee Pro-1000 and Loadmaster presses with Lee powder-through expander dies.
Lee Auto-Disk, Auto-Drum Rifle Powder Short Charging Die
Product Information
The Lee Short Charging Die is for use with the Lee Auto-Disk, Pro Auto-Disk and Auto-Drum Powder Measure. Designed to work with cases .860 to 1.760 inches long (22 Hornet to 223 Rem), and bullet diameter .223 and larger due to powder bridging. The rifle charging die works the same as the pistol powder through expanding die, except it doesn't expand the case mouth. Rifle case expansion is done in the sizing die. For cases 1.760 to 2.620 inches long, use the long charging die. Steel die comes packaged in a plastic storage case.
LEE DELUXE AUTO-DRUM POWDER MEASURE
Product Information
- Case actuated; never spill a charge.
- Exclusive elastomer wiper prevents powder shearing, works great with difficult metering extruded powders.
- Machined body with labyrinth groove mates to the precision molded nylon drums providing a leak free fit with the finest powders.
- Drum is actuated by a steel sector and pinion gear train.
- Quick-change hopper has on/off valve to quickly change powders.
- Sleek modern design, all gears springs and levers inside the die cast housing.
- Features red anodized swivel adapter, makes adjusting and moving measure fast and convenient. Also provides clearance for the longest reloading dies.
Reviews
There are no reviews yet.