LEE – LONG CHARGING DIE
$30.00
Product Information
Lee Long Charging Die is for use with the Auto-Disk, Pro Auto-Disk and Auto-Drum Powder Measure. Works with cases 1.760 to 2.620 inches long (223 Rem to 300 Win Mag). It works the same as the pistol powder through expanding dies except it doesn’t expand the case mouth. Rifle case expansion is normally done in the sizing die.
1 in stock
Description
Product Information
Lee Long Charging Die is for use with the Auto-Disk, Pro Auto-Disk and Auto-Drum Powder Measure. Works with cases 1.760 to 2.620 inches long (223 Rem to 300 Win Mag). It works the same as the pistol powder through expanding dies except it doesn’t expand the case mouth. Rifle case expansion is normally done in the sizing die.
Additional information
| Weight | 0.5 lbs |
|---|---|
| Brand |
LEE |
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Shipping & Delivery
Related products
Hornady – POWDER MEASURE STANDARD METERING INSERT L-N-L
The Hornady Lock-N-Load Powder Measure Standard Metering Assembly is the perfect tool for the reloader looking to improve the function of their Hornady Lock-N-Load Powder Measure. The Standard Metering Assembly features an adjustment lock ring, which allows settings to be locked in place permanently for a favorite load. Measures approximately 5 to 100 grains of typical rifle powder. Will not work with the Lock-N-Load Bench Rest or Black Powder Measurers. (Not compatible with the Bench Rest Grade or Black Powder Measure.)
LEE – DOUBLE DISK KIT
Product Information
For use with Lee Auto-Disk Powder Measures. Raises the hopper so you can stack two powder disks. This not only doubles the capacity of the disks but it makes very find adjustments possible. Most powders can be adjusted up or down .1 grain with different combinations of disks. Complete listing of combinations, 4 extra disks, screws and risers are included.
LEE – Improved Powder Measure Kit
Product Information
The Lee Improved Powder Measure Kit is the perfect powder measure kit for the reloader who is looking for a set of dippers for small batch reloading. These dippers are inherently safe as they measure powder by volume and cannot get out of adjustment. This kit includes 15 uniformly graduated dippers that measure from .3 cubic centimeters to 4.3 cubic centimeters and a handy application table that shows what powder charges can be thrown with each dipper. Technical Information: Function: Measure powder charges by volume Material: Plastic Notes: •Slide card shows the grains of powder each measure will dispense for many types of powder. •Be sure to measure each powder charge, as there can be weight variances from lot to lot.
LEE – PERFECT POWDER MEASURE (2gr-100gr)
Product Information
The Lee Perfect Powder Measure features a soft elastomer wiper that eliminates cut powder and jerky action. The smooth rotor operation results in incredibly uniform charges. A nylon cone shaped drum is self-lubricating so it will never bind or wear out. The micrometer adjustment reads directly in cubic centimeters. Just multiply the charge in grains by the cc for one grain and you have the setting. Works fine for charges from 2 grains to over 100 grains. Changing powder is fast and easy with the removable hopper. With the optional Universal Charging Die, the powder measure becomes case operated. Includes adapters to fit almost all cartridges.
Lee Auto-Disk, Auto-Drum Rifle Powder Short Charging Die
Product Information
The Lee Short Charging Die is for use with the Lee Auto-Disk, Pro Auto-Disk and Auto-Drum Powder Measure. Designed to work with cases .860 to 1.760 inches long (22 Hornet to 223 Rem), and bullet diameter .223 and larger due to powder bridging. The rifle charging die works the same as the pistol powder through expanding die, except it doesn't expand the case mouth. Rifle case expansion is done in the sizing die. For cases 1.760 to 2.620 inches long, use the long charging die. Steel die comes packaged in a plastic storage case.
LEE DELUXE AUTO-DRUM POWDER MEASURE
Product Information
Deluxe Auto-Drum Powder Measure with new red anodized swivel adapter that provides a larger gripping area for adjusting into your press, and raises the powder measure to clear the tallest dies, and eliminates the need for the riser.
Automatic case actuated drum powder measure. Accurately and automatically dispense powder in your favorite cartridge. Two infinitely adjustable drums included. These Quick Change drums will accurately and reliably drop charges from 1 to 80 grains of powder.
- Case actuated; never spill a charge.
- Exclusive elastomer wiper prevents powder shearing, works great with difficult metering extruded powders.
- Machined body with labyrinth groove mates to the precision molded nylon drums providing a leak free fit with the finest powders.
- Drum is actuated by a steel sector and pinion gear train.
- Quick-change hopper has on/off valve to quickly change powders.
- Sleek modern design, all gears springs and levers inside the die cast housing.
- Features red anodized swivel adapter, makes adjusting and moving measure fast and convenient. Also provides clearance for the longest reloading dies.
Reviews
There are no reviews yet.