LEE 5.7×28 2-DIE SET
$83.00
Product Information
Lee 5.7X28 Very Ltd. Production 2-Die Set. Includes Full Length Sizing Die, Bullet Seating Die, Universal Shell Holder, powder dipper and Instructions/Load data.
4 in stock
Related products
Hornady – Cowboy 3-Die Set 38 Special, 357 Magnum, 357 Maxim
The Cowboy Die sets have been designed for cast bullet reloaders. Each set includes a Full-length sizing die, and adjustable case mouth expander die and seater die that is designed for working with lead bullets. This special seater helps to ensure that ammunition is loaded without deforming lead bullets.
Hornady Cowboy 3-Die sets have been specially designed for cowboy action and cast bullet reloaders. These die sets feature the same great benefits that Hornady dies are known for. Each set includes a Full-length sizing die, and adjustable case mouth expander die and seater die that is designed for working with lead bullets. This special seater helps to ensure that ammunition is loaded without deforming lead bullets. Sets come packaged in a plastic storage box and three Sure-Loc Rings, Shellholder sold separately.
Technical Information
Notes:
•Seating die features seater adjustment screw, built-in crimper, locking retainer spring as well as a floating bullet seater alignment sleeve and seating stem, which pre-align the bullet and case before seating occurs.
LEE – 40 S&W/10MM CARBIDE 3 DIE SET w/Dipper & #R19 S/H
Product Information
We use a solid carbide insert, ground to a special contour that does not leave a belt mark on the case like other carbide dies. With a carbide sizer, no case lube is needed. Sizer also features an unbreakable decapper and built-in stuck case remover. The Powder Through Expanding Die permits charging the case while expanding the case mouth. The Bullet Seat and Feed Die features a free floating bullet seater to insure maximum accuracy. Includes: Sizer/Decapping Die, Powder Through Expanding Die, Bullet Seat and Feed Die, Shellholder, Powder Dipper and Load Data.
LEE – 45 ACP CARBIDE 3 DIE SET w/Dipper & #R2 S/H
Product Information
We use a solid carbide insert, ground to a special contour that does not leave a belt mark on the case like other carbide dies. With a carbide sizer, no case lube is needed. Sizer also features an unbreakable decapper and built-in stuck case remover. The Powder Through Expanding Die permits charging the case while expanding the case mouth. The Bullet Seat and Feed Die features a free floating bullet seater to insure maximum accuracy.
Includes: Sizer/Decapping Die, Powder Through Expanding Die, Bullet Seat and Feed Die, Shellholder, Powder Dipper and Load Data.
LEE – Undersized Carbide Sizing Die 45acp
Product Information
Lee U Carbide Small Base Sizing Dies are great for reloaders looking for ultimate feeding reliability in their handgun. These dies undersize brass between .002" and .003" smaller than other Lee Carbide Sizing dies. Ammunition with undersized brass cases will chamber each and every time it is loaded out of a magazine giving reliable chambering each time a round is stripped out of the magazine or loaded into a cylinder. Competition shooters rely on having ammunition that will feed and chamber each round of ammunition as it is stripped out of the magazine. One of the other benefits reloaders have reported when using Lee U dies is increased consistency and accuracy in loaded rounds because these dies help increase and provide more consistent neck tension on loaded bullets. The solid carbide insert inside of these dies is ground to a special contour that does not leave a belt mark on the case. These carbide dies do not require lubricant while resizing, though a little case lube will make the sizing process easier. Shellholder sold separately. Technical Information: Material: Steel Die Type: U Carbide Small Base Sizing Die Accessories: Plastic Storage Container Notes: •Carbide sizing dies do not require case lube •Undersized dies size brass between .002" and .003" below SAAMI specifications, so ammunition will feed in chamber in tight chambers •Undersized dies work great for bringing back case tension to hold bullets on cases that may be thinner walled
Lee 32acp Carbide 3-Die Set
Product Information
The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Carbide 3-Die Set comes packaged with a carbide sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. Each die set comes packaged with the appropriate shellholder, powder dipper, load data sheet and plastic storage container. One of the great features of carbide dies is that they do not require the cases to be lubricated prior to use like non-carbide dies. Notes: Adjustable crimp from slight taper to full roll
LEE 45 ACP/AR/SCHOFIELD/ MAG/ITALIAN CARBIDE SIZE DIE
Lee Precision has been making high quality reloading equipment for over 50 years. Lee Carbide Sizing Dies are great for straight wall cartridge cases. The solid carbide insert is ground to a special contour that will not leave a belt mark on the cartridge case. Carbide dies require no lubricant and will actually burnish the case to improve the finish. Carbide dies will last a lifetime and not wear out. Shellholder sold separately.
Notes: No lubrication required
LEE 460 S&W CARBIDE 3 DIE SET, S/H #14
Product Information
The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Carbide 3-Die Set comes packaged with a carbide sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. Each die set comes packaged with the appropriate shellholder, powder dipper, load data sheet and plastic storage container. Notes: Adjustable crimp from slight taper to full roll
