REDDING 357 SIG FL 3-DIE SET STEEL
$159.00
Product Information
Redding dies are made of the finest alloy steels obtainable and machined on Hardinge Super- Precision lathes capable of holding the tightest tolerances in the industry. To maintain tolerances and guarantee that your dies will last a lifetime, all Redding dies are heat treated in atmospherically controlled furnaces. Finally, your dies are hand polished for smooth, flawless functioning, go through final inspection, and are ultrasonically cleaned and packaged. The die box is a handy cartridge loading block and storage package. Inside is a spare decapping pin, hex wrench, and even a place for your shellholder (sold separately). All Redding dies use the industry standard 7/8-14 threaded bodies. Die sets for straight wall cases contain three dies: a full length resizing die, an expander die with neck expanding plug, and seating die with built in crimp ring and the proper seating plug. Die sets for bottleneck cases contain two dies: a full length resizing die and seating die with built in crimp ring.
1 in stock
Product Information
Redding dies are made of the finest alloy steels obtainable and machined on Hardinge Super- Precision lathes capable of holding the tightest tolerances in the industry. To maintain tolerances and guarantee that your dies will last a lifetime, all Redding dies are heat treated in atmospherically controlled furnaces. Finally, your dies are hand polished for smooth, flawless functioning, go through final inspection, and are ultrasonically cleaned and packaged. The die box is a handy cartridge loading block and storage package. Inside is a spare decapping pin, hex wrench, and even a place for your shellholder (sold separately). All Redding dies use the industry standard 7/8-14 threaded bodies. Die sets for straight wall cases contain three dies: a full length resizing die, an expander die with neck expanding plug, and seating die with built in crimp ring and the proper seating plug. Die sets for bottleneck cases contain two dies: a full length resizing die and seating die with built in crimp ring.
| Weight | 1.5 lbs |
|---|
Related products
Hornady – 45 ACP/WIN/AR (II) 3-DIE SET TITAN/w Taper Crimp
Product Information
Hornady Custom Grade New Dimension Nitride 3-Die sets includes CGND Nitride Full-length Sizing Die, CGND Adjustable Case Mouth Expander Die and CGND Seater Die with taper crimp. The sizer die features Titanium Nitride sizing rings that eliminate case sticking and require no lubrication. The Zip Spindle is set in place with a collet lock and secured with light threads for precision decapping and easy adjustment. Comes packaged with a plastic storage box and three Sure-Loc Rings
This die set comes with a Taper Crimp Die
LEE – 38 SPECIAL CARBIDE 3 DIE SET w/Dipper & #R1 S/H
We use a solid carbide insert, ground to a special contour that does not leave a belt mark on the case like other carbide dies. With a carbide sizer, no case lube is needed. Sizer also features an unbreakable decapper and built-in stuck case remover. The Powder Through Expanding Die permits charging the case while expanding the case mouth. The Bullet Seat and Feed Die features a free floating bullet seater to insure maximum accuracy.
Includes: Sizer/Decapping Die, Powder Through Expanding Die, Bullet Seat and Feed Die, Shellholder, Powder Dipper and Load Data.
LEE – Undersized Carbide Sizing Die 45acp
Product Information
Lee U Carbide Small Base Sizing Dies are great for reloaders looking for ultimate feeding reliability in their handgun. These dies undersize brass between .002" and .003" smaller than other Lee Carbide Sizing dies. Ammunition with undersized brass cases will chamber each and every time it is loaded out of a magazine giving reliable chambering each time a round is stripped out of the magazine or loaded into a cylinder. Competition shooters rely on having ammunition that will feed and chamber each round of ammunition as it is stripped out of the magazine. One of the other benefits reloaders have reported when using Lee U dies is increased consistency and accuracy in loaded rounds because these dies help increase and provide more consistent neck tension on loaded bullets. The solid carbide insert inside of these dies is ground to a special contour that does not leave a belt mark on the case. These carbide dies do not require lubricant while resizing, though a little case lube will make the sizing process easier. Shellholder sold separately. Technical Information: Material: Steel Die Type: U Carbide Small Base Sizing Die Accessories: Plastic Storage Container Notes: •Carbide sizing dies do not require case lube •Undersized dies size brass between .002" and .003" below SAAMI specifications, so ammunition will feed in chamber in tight chambers •Undersized dies work great for bringing back case tension to hold bullets on cases that may be thinner walled
LEE – Undersized Carbide Sizing Die 9mm Luger
Product Information
Lee U Carbide Small Base Sizing Dies are great for reloaders looking for ultimate feeding reliability in their handgun. These dies undersize brass between .002″ and .003″ smaller than other Lee Carbide Sizing dies. Ammunition with undersized brass cases will chamber each and every time it is loaded out of a magazine giving reliable chambering each time a round is stripped out of the magazine or loaded into a cylinder. Competition shooters rely on having ammunition that will feed and chamber each round of ammunition as it is stripped out of the magazine. One of the other benefits reloaders have reported when using Lee U dies is increased consistency and accuracy in loaded rounds because these dies help increase and provide more consistent neck tension on loaded bullets. The solid carbide insert inside of these dies is ground to a special contour that does not leave a belt mark on the case. These carbide dies do not require lubricant while resizing, though a little case lube will make the sizing process easier. Shellholder sold separately.
Technical Information:
Material: Steel
Die Type: U Carbide Small Base Sizing Die
Accessories: Plastic Storage Container
Notes:
•Carbide sizing dies do not require case lube
•Undersized dies size brass between .002″ and .003″ below SAAMI specifications, so ammunition will feed in chamber in tight chambers
•Undersized dies work great for bringing back case tension to hold bullets on cases that may be thinner walled
Lee 30 Mauser (7.63×25mm) Steel 3-Die Set
Product Information
The Lee Steel 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Steel 3-Die Set comes packaged with a steel sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. Each die set comes packaged with the appropriate shellholder, powder dipper, load data sheet and plastic storage container. Notes: Adjustable crimp from slight taper to full roll
LEE 44 RUSSIAN CARBIDE 3 DIE SET, S/H #11
Product Information
We use a solid carbide insert, ground to a special contour that does not leave a belt mark on the case like other carbide dies. With a carbide sizer, no case lube is needed. Sizer also features an unbreakable decapper and built-in stuck case remover. The Powder Through Expanding Die permits charging the case while expanding the case mouth. The Bullet Seat and Feed Die features a free floating bullet seater to insure maximum accuracy. Includes: Sizer/Decapping Die, Powder Through Expanding Die, Bullet Seat and Feed Die, Shellholder, Powder Dipper and Load Data.
The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Carbide 3-Die Set comes packaged with a carbide sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. One of the great features of carbide dies is that they do not require the cases to be lubricated prior to use like non-carbide dies.
Technical Information:
Material:
•Steel
Die Types Included
•Carbide Full Length Sizing Die with Decapping Unit
•Powder Through Expanding Die
•Bullet Seating Die
Accessories: •Plastic Container
•Shellholder
•Powder dipper
•Load data sheet
Notes:
•Adjustable crimp from slight taper to full roll
LEE 460 S&W CARBIDE 3 DIE SET, S/H #14
Product Information
The Lee Carbide 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Carbide 3-Die Set comes packaged with a carbide sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. Each die set comes packaged with the appropriate shellholder, powder dipper, load data sheet and plastic storage container. Notes: Adjustable crimp from slight taper to full roll
