BPI WAD 28ga TPS NON-TOX 5/8 STEEL 3/4 ITX 100/BG
$30.00
The TPS 28ga is a full-length shot column designed specifically for the rigors of modern non-toxic shot, like steel, ITX, and Hevi-Shot. Finally, a wad that will allow you to load almost any type of non-toxic shot for your modern 28ga shotgun. Designed for magnum field loads, the TPS 28 is the grand result of over two years of development.
Maximum capacities of smaller shot sizes are 1 oz. ITX Extreme-13 shot, 7/8 oz. ITX Original-10 shot, and 3/4 oz. steel shot. Capacity will vary greatly according to pellet size and these maximum weights will not necessarily yield the best loads; only testing results will render that decision.
- Length = 1.770″
- Depth = 1.632″
- Gas seal diam. = 0.546″
- Gas seal depth = 0.085″
- Wall thick. = 0.025″ to 0.055″
Product Type: Wad, Multi-Metal capability.
Size: 28-gauge
Typical Loads: 28ga non-toxic and high-capacity field loads.
Maximum Payload: 1 oz. ITX E-13, 7/8 oz. ITX Original-10 shot, and 3/4 oz. steel shot.
10 in stock
The TPS 28ga is a full-length shot column designed specifically for the rigors of modern non-toxic shot, like steel, ITX, and Hevi-Shot. Finally, a wad that will allow you to load almost any type of non-toxic shot for your modern 28ga shotgun. Designed for magnum field loads, the TPS 28 is the grand result of over two years of development.
Maximum capacities of smaller shot sizes are 1 oz. ITX Extreme-13 shot, 7/8 oz. ITX Original-10 shot, and 3/4 oz. steel shot. Capacity will vary greatly according to pellet size and these maximum weights will not necessarily yield the best loads; only testing results will render that decision.
- Length = 1.770″
- Depth = 1.632″
- Gas seal diam. = 0.546″
- Gas seal depth = 0.085″
- Wall thick. = 0.025″ to 0.055″
| Weight | 1 lbs |
|---|
Related products
BPI CORK FILLER/CUSHION WAD 12ga .125″ 250/BAG
Product Information
CLAYBUSTER – Wads 12 Gauge CB1118-12 (Replaces WAA12) 500/Bag
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. This wad was designed for 1 to 1-5/8 oz trap, skeet, sporting clays, or hunting loads and performs best in tapered hulls.
Technical Information:
•Replaces the Winchester WAA12
•Optimal Load: 1-1/8 oz
•Intended as an economical wad replacement for target and wing shooters
•500/bag
•Wads are made with 100% prime resin for consistency
CLAYBUSTER – Wads 12 Gauge CB1118-12 (Replaces WAA12) 5000/Case
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. This wad was designed for 1 to 1-5/8 oz trap, skeet, sporting clays, or hunting loads and performs best in tapered hulls.
Technical Information:
•Replaces the Winchester WAA12
•Optimal Load: 1-1/8 oz
•Intended as an economical wad replacement for target and wing shooters
•500/bag
•Wads are made with 100% prime resin for consistency
Claybuster Shotshell Wads 12 Gauge CB4118-12B Windjammer (Replaces WTW12) 1-1/8 oz 5000/Case
Product Information:
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. This wad was designed for use in 1 to 1-1/4 oz target or hunting loads. This is for a Case of 5000 pieces
CLAYBUSTER WAD 12ga 1-1/8 (FIG-8) CB8118 500/Bag
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. This wad was designed for use in 1-1/8 to 1-1/4 oz target or hunting loads in tapered hulls such as Remington or Winchester. 500/Bag
CLAYBUSTER WAD 28ga 3/4oz CB5034 (WAA28-HS) 500/Bag
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. For use in 3/4 oz. Winchester HS, Remington, or Federal hulls. Optimum load is 3/4 oz. 500 pieces per bag
