BPI CORK FILLER/CUSHION WAD 12ga .125″ 250/BAG
$20.28
Product Information
Cork wads are placed under the shot bringing the load up to perfect crimping height. Cork wads are light, dense and very flexible – great for smaller pellet sizes. Cork wads can be stacked to accomodate any height requirements. Use 12 gauge cork wads inside 10 gauge shotcups and 20 gauge cork wads inside 12 gauge shotcups. Cork wads can be used in place of other filller wads but are not to be used directly on the powder.
Out of stock
Product Information
Cork wads are placed under the shot bringing the load up to perfect crimping height. Cork wads are light, dense and very flexible – great for smaller pellet sizes. Cork wads can be stacked to accomodate any height requirements. Use 12 gauge cork wads inside 10 gauge shotcups and 20 gauge cork wads inside 12 gauge shotcups. Cork wads can be used in place of other filller wads but are not to be used directly on the powder.
| Weight | 0.2 lbs |
|---|
Related products
BPI WAD 12ga CSD 1oz UNSLIT STEEL 250/Bag
Product Information:
- CSD100 12ga for 1 oz. steel
Technical Notes:
|
CLAYBUSTER WAD 12ga 1-1/8 (FIG-8) CB8118 5000/Case
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. This wad was designed for use in 1-1/8 to 1-1/4 oz target or hunting loads in tapered hulls such as Remington or Winchester. 5000/Case
CLAYBUSTER WAD 20ga 7/8oz CB1078 (WAA20) 500/Bag
Product Information
C & D Special Products' Claybuster Wad Line is a well-established economical wad line built for target-shooters and wing-shooters alike. The Claybuster Wad Line can satisfy nearly every target or wing shooting application for reloading. The wads are manufactured with 100% prime resin so a consistent quality product can be expected with every purchase. For use in 7/8 to 1-1/4 oz. skeet, sporting clay or hunting loads. Versatile for most hulls depending on powder volume. Optimum load is 7/8 oz. Â
CLAYBUSTER WAD CB2100 12ga 1oz (12S0) 500/Bag
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. For use in 7/8 to 1-1/8 oz. trap, skeet, sporting clays or hunting loads. Performs best in straight wall cases such as Federal paper or plastic and Fiocchi.
Technical Information
Optimum load is 1 oz.
Wads are made with 100% prime resin for consistency
5000 Pcs/Case
