Prvi Bullet 30cal (.308) (30-30) 150gr FSP 50/Bag

Product Information

These revolutionary bullets from Barnes are made of 100% copper and contain no lead. When the bullet expands, four razor-sharp cutting petals are created, allowing the bullet to penetrate farther through tough bone and tissue. These bullets usually retain 100% of their original weight, making them a superb choice for hunting. Barnes recommends initially seating bullets 0.050" off the lands. Best accuracy will be found from 0.030" to 0.070" depending on the rifle. This is NOT LOADED ammunition.

Product Information

Features exposed lead tips for controlled expansion and hard-hitting terminal performance. Our pioneering secant ogive design is one of the most ballistically efficient profiles ever developed. Our InterLock design features a raised ring inside the jacket that is embedded in the bullet’s core that keeps the core and jacket locked together during expansion to retain mass and energy. This is NOT LOADED ammunition

Product Information

ELD Match bullets are technologically advanced, enhanced accuracy target bullets featuring Heat Shield tips with the PERFECT MEPLAT (tip point) combined with numerous design features that deliver the highest-in-class ballistic coefficients, superior accuracy and extreme consistency from bullet-to-bullet, lot-to-lot. All manufacturers conventional polymer tips in high BC bullets melt in flight. Hornady® engineers discovered that conventional bullet tip materials in streamlined, high BC bullets melt and deform. Although not a significant issue affecting moderate BC conventional tipped varmint and hunting bullets, aerodynamic heating causes BC reduction and degradation of accuracy, particularly at extended ranges (400 yds ). To counter this effect, Hornady® identified a heat resistant polymer and developed the patent pending Heat Shield™ tip. This revolutionary new tip creates the perfect meplat (tip) with exceptionally consistent results from bullet-to-bullet and lot-to-lot. Superior accuracy and industry leading ballistic design has been achieved with the ELD Match bullet. An optimum secant ogive and boattail design along with the patent-pending Heat Shield tip produce a bullet with the highest possible ballistic coefficient in its class. Verified by Doppler Radar, ELD Match ballistic coefficients do not vary due to the integrity of the Heat Shield tip. The bullets perform extraordinarily consistently with no BC degradation at extended range. This is NOT LOADED ammunition  

Product Information

AccuBond represents the most advanced bonded core bullet technology to date. Through a proprietary bonding process that eliminates voids in the bullet core, AccuBond marries Nosler’s traditional copper-alloy jacket with its special lead-alloy core. The result is a bullet that flies true, penetrates deep and retains its weight—and won’t cause extensive barrel fouling. Nosler AccuBond--the benchmark by which all bonded core bullets will be measured. The fully tapered, heavy alloy jacket is bonded to the special lead alloy core through a proprietary process designed for controlled expansion, deep penetration and 60-70% weight retention. Totally concentric, impact extruded jacket bonds completely to the bullet core for extreme accuracy. The AccuBond bullet's polymer tip resists deformation in the magazine and initiates expansion upon impact. Nosler Solid Base design jacket base acts as a platform for large diameter mushroom. Ballistically engineered Solid Base boat tail configuration combines with the streamlined polymer tip for extreme long range performance. This is NOT LOADED ammunition.