NOSLER 30(.308) 220gr SSP BULLET Partition 50/bx
$125.00
The Nosler Partition is still the benchmark by which all modern bullets are measured. Nosler’s special lead-alloy, dual-core provides superior mushrooming characteristics at virtually all impact velocities. The fully tapered copper-alloy jacket ruptures instantly at the thin jacket mouth, yet the gradual thickening along the bullet’s axis controls expansion and curls the jacket uniformly outward at high and low velocities. Nosler’s integral partition supports the expanded mushroom and retains the rear lead-alloy core. The enclosed rear core retains more than two-thirds of the original bullet weight for deep penetration. Every Partition® bullet in the Nosler® line delivers optimum length, weight and ogive design for maximum in-flight and terminal performance.
This is not loaded ammunition.
4 in stock
The Nosler Partition is still the benchmark by which all modern bullets are measured. Nosler’s special lead-alloy, dual-core provides superior mushrooming characteristics at virtually all impact velocities. The fully tapered copper-alloy jacket ruptures instantly at the thin jacket mouth, yet the gradual thickening along the bullet’s axis controls expansion and curls the jacket uniformly outward at high and low velocities. Nosler’s integral partition supports the expanded mushroom and retains the rear lead-alloy core. The enclosed rear core retains more than two-thirds of the original bullet weight for deep penetration. Every Partition® bullet in the Nosler® line delivers optimum length, weight and ogive design for maximum in-flight and terminal performance.
This is not loaded ammunition.
| Weight | 1.3 lbs |
|---|
Related products
Barnes – TTSX Bullets 30cal (308 Dia)165gr Spitzer 50/Box
Product Information:
The Tipped TSX features a 100-percent copper body with rings cut into the shank. A polymer tip boosts the ballistic coefficient, improves long-range ballistics and provides fast expansion. The four razor sharp cutting petals double the bullet diameter making delivering ''dead right there'' performance. These revolutionary bullets from Barnes are made of 100% copper and contain no lead. Barnes recommends initially seating bullets 0.050'' off the lands. Best accuracy will be found from 0.030'' to 0.070'' depending on the rifle. This is not loaded ammunition.Technical Information:
•Caliber: 30 •Bullet Diameter: 0.308 •Bullet Weight: 165 Grains •Bullet Length: 1.388'' •Bullet Style: Spitzer Boat Tail •Bullet Coating: Non-coated
Ballistics Information: •Sectional Density: 0.248 •Ballistic Coefficient: 0.442
Hornady – 30cal (.308) 150gr SST BULLET SuperShok 100/Box
Product Information
Hornady SST Bullets combine proven Hornady performance with a high ballistic coefficient. The sharp, pointed polymer tip creates a fast, flat shooting bullet. The SST features a one-piece core and jacket strengthened in critical areas, to deliver controlled expansion and superior weight retention. Featuring Hornady's trade mark InterLock ring system, this bullet's core and jacket remain locked solid during expansion, creating massive wound channels. Technical Information: •Caliber: 30 •Bullet Diameter: .308'' •Bullet Weight: 150 Grains •Bullet Style: SST Boat Tail Ballistics Information: •Sectional Density: 0.248 •Ballistic Coefficient:0.447 This is NOT LOADED ammunition.HORNADY 30c (.308) 168gr ELD MATCH BULLET 100/Box
Product Information
Conventional polymer tips in high BC bullets melt in flight. Hornady engineers discovered that conventional bullet tip materials in streamlined, high BC bullets melt and deform. Although not a significant issue affecting moderate BC conventional tipped varmint and hunting bullets, aerodynamic heating causes BC reduction and degradation of accuracy, particularly at extended ranges (400 yds +). To counter this effect, Hornady identified a heat resistant polymer and developed the patent pending Heat Shield tip. This revolutionary new tip creates the perfect meplat (tip) with exceptionally consistent results from bullet-to-bullet and lot-to-lot. The Heat Shield tip defies the effects of aerodynamic heating and retains its shape to provide a perfect meplat (tip) that is always the same shape. A streamlined secant ogive with optimum boattail design, plus the highly concentric AMP bullet jackets, combined with the patent pending Heat Shield tip creates a supremely accurate, high BC match bullet. ELD-Match bullet BCs are measured with Doppler radar and corrected to standard atmospheric conditions. Features:- Heat Shield Tip forms the perfect meplat
- No tip deformation from aerodynamic heating
- Extremely low drag bullet profile delivers high ballistic coefficients
- Swaged lead core provided uniformity and balance
- AMP jacket design for optimum concentricity and accuracy
