NOSLER 30 (.308) 150gr Spitzer Bullet Partition 50/Box
$98.75
Product Information
The Nosler Partition is still the benchmark by which all modern bullets are measured. Nosler’s special lead-alloy, dual-core provides superior mushrooming characteristics at virtually all impact velocities. The fully tapered copper-alloy jacket ruptures instantly at the thin jacket mouth, yet the gradual thickening along the bullet’s axis controls expansion and curls the jacket uniformly outward at high and low velocities. Nosler’s integral partition supports the expanded mushroom and retains the rear lead-alloy core. The enclosed rear core retains more than two-thirds of the original bullet weight for deep penetration. Every Partition® bullet in the Nosler® line delivers optimum length, weight and ogive design for maximum in-flight and terminal performance.
This is NOT LOADED ammunition.
1 in stock
Product Information
The Nosler Partition is still the benchmark by which all modern bullets are measured. Nosler’s special lead-alloy, dual-core provides superior mushrooming characteristics at virtually all impact velocities. The fully tapered copper-alloy jacket ruptures instantly at the thin jacket mouth, yet the gradual thickening along the bullet’s axis controls expansion and curls the jacket uniformly outward at high and low velocities. Nosler’s integral partition supports the expanded mushroom and retains the rear lead-alloy core. The enclosed rear core retains more than two-thirds of the original bullet weight for deep penetration. Every Partition® bullet in the Nosler® line delivers optimum length, weight and ogive design for maximum in-flight and terminal performance.
This is NOT LOADED ammunition.
| Weight | 1.25 lbs |
|---|
Related products
Barnes – TTSX Bullets 30cal (308 Dia)165gr Spitzer 50/Box
Product Information:
The Tipped TSX features a 100-percent copper body with rings cut into the shank. A polymer tip boosts the ballistic coefficient, improves long-range ballistics and provides fast expansion. The four razor sharp cutting petals double the bullet diameter making delivering ''dead right there'' performance. These revolutionary bullets from Barnes are made of 100% copper and contain no lead. Barnes recommends initially seating bullets 0.050'' off the lands. Best accuracy will be found from 0.030'' to 0.070'' depending on the rifle. This is not loaded ammunition.Technical Information:
•Caliber: 30 •Bullet Diameter: 0.308 •Bullet Weight: 165 Grains •Bullet Length: 1.388'' •Bullet Style: Spitzer Boat Tail •Bullet Coating: Non-coated
Ballistics Information: •Sectional Density: 0.248 •Ballistic Coefficient: 0.442
Berry’s – 30M1 CARBINE (.308) 110gr RN BULLET 100/Bag
Product Information
Berry’s bullets begin with a precision-swaged lead core to ensure uniformity. They are then fused with a thick layer of high-grade copper to the core - making Berry’s bullets as accurate as they are attractive. This is not loaded ammunition. Note:(When loading these plated rifle bullets do not exceed a max velocity of 1750 fps.)
CamPro – 30cal (.308) 147gr FMJBT Bullet 100/Bag
Product Information
CAMPRO bullets offer one of the highest quality and value on the market. You now have the opportunity to use the same quality during competitions and while you practice.
These full metal jacket bullets feature a copper jacket with lead core
Experience an ultra-precise shot—bullet after bullet.
Hornady – 30cal (.308) 165gr SST BULLET SuperShok 100/Box
Product Information
Hornady SST Bullets combine proven Hornady performance with a high ballistic coefficient. The sharp, pointed polymer tip creates a fast, flat shooting bullet. The SST features a one-piece core and jacket strengthened in critical areas, to deliver controlled expansion and superior weight retention. Featuring Hornady’s trade mark InterLock ring system, this bullet’s core and jacket remain locked solid during expansion, creating massive wound channels.
Technical Information:
•Caliber: 30
•Bullet Diameter: .308”
•Bullet Weight: 165 Grains
•Bullet Style: SST Boat Tail
Ballistics Information:
•Sectional Density: 0.248
•Ballistic Coefficient:0.447
This is NOT LOADED ammunition.
Hornady 30c (.308) 178gr ELD MATCH BULLET 100/Box
Product Information
ELD Match bullets are technologically advanced, enhanced accuracy target bullets featuring Heat Shield tips with the PERFECT MEPLAT (tip point) combined with numerous design features that deliver the highest-in-class ballistic coefficients, superior accuracy and extreme consistency from bullet-to-bullet, lot-to-lot. All manufacturers conventional polymer tips in high BC bullets melt in flight. Hornady® engineers discovered that conventional bullet tip materials in streamlined, high BC bullets melt and deform. Although not a significant issue affecting moderate BC conventional tipped varmint and hunting bullets, aerodynamic heating causes BC reduction and degradation of accuracy, particularly at extended ranges (400 yds ). To counter this effect, Hornady® identified a heat resistant polymer and developed the patent pending Heat Shield™ tip. This revolutionary new tip creates the perfect meplat (tip) with exceptionally consistent results from bullet-to-bullet and lot-to-lot. Superior accuracy and industry leading ballistic design has been achieved with the ELD Match bullet. An optimum secant ogive and boattail design along with the patent-pending Heat Shield tip produce a bullet with the highest possible ballistic coefficient in its class. Verified by Doppler Radar, ELD Match ballistic coefficients do not vary due to the integrity of the Heat Shield tip. The bullets perform extraordinarily consistently with no BC degradation at extended range. This is NOT LOADED ammunition
Missouri Bullet Co. – CAST 300 BLKOUT 245gr RNFP COATED 250/Box
Product Information
Missouri’s bullets begin with a precision-swaged lead core to ensure uniformity. Missouri’s’s bullets are as accurate as they are attractive.
At the Missouri Bullet Company, we optimize bullets for your intended application. We don’t take a “one size fits all” approach to manufacturing your bullets. Every box of our bullets displays the BHN, which we constantly sample and monitor. We take the time to create lead bullet alloy that is specialized for the bullet hardness that works best for you. It is a fact that we spend significantly more time alloying our lead than we do in making the bullets that come from it and we do this to provide you the right bullet for your application.
Specifications:
.309 Diameter
245 Grain RNFP
Brinell 20
For Subsonic Work
Hi-Tek 2-Extreme Coating from J&M Specialized
Color may vary
Note:
Approximately 238 grains @20 BHN
This is NOT LOADED ammunition.
Nosler – 30c (.308) 180gr Spitzr BULLET AccuBond 50/Box
Product Information
AccuBond represents the most advanced bonded core bullet technology to date. Through a proprietary bonding process that eliminates voids in the bullet core, AccuBond marries Nosler’s traditional copper-alloy jacket with its special lead-alloy core. The result is a bullet that flies true, penetrates deep and retains its weight—and won’t cause extensive barrel fouling. Nosler AccuBond--the benchmark by which all bonded core bullets will be measured. The fully tapered, heavy alloy jacket is bonded to the special lead alloy core through a proprietary process designed for controlled expansion, deep penetration and 60-70% weight retention. Totally concentric, impact extruded jacket bonds completely to the bullet core for extreme accuracy. The AccuBond bullet's polymer tip resists deformation in the magazine and initiates expansion upon impact. Nosler Solid Base design jacket base acts as a platform for large diameter mushroom. Ballistically engineered Solid Base boat tail configuration combines with the streamlined polymer tip for extreme long range performance. This is NOT LOADED ammunition.
Sierra – Tipped MatchKing 30cal (.308) 175 Grain Polymer Tip 100/Box
Product Information
Sierra MatchKing rifle bullets are super-accurate bullets with very thin jackets and are held to exacting tolerances in diameter and weight. Their accuracy has been acclaimed worldwide and they have been used to win more target competitions than all target bullets from other manufacturers combined. Weight retention is held to within /- 0.3 grain. Sierra has enhanced a segment of the MatchKing line by adding the acetal resin tip, thus crowning the Tipped MatchKing (TMK) bullet line. The major advantage of adding a tip to the bullet is the reduction of drag, producing a more favorable ballistic coefficient. Due to the ballistic advantage that the tip provides, the 168 Tipped MatchKing (TMK) will stay supersonic at 1,000 yards at normal .308 Winchester velocities, unlike its untipped counterpart. The Tipped MatchKing (TMK) bullet is an excellent choice for Palma and F-Class (FTR / F Open) matches, as well as 3-Gun and various other competitions. Although the MatchKing line is recognized around the world for record setting accuracy, like their untipped counterparts, Tipped MatchKing (TMK) bullets are not recommended for hunting anything larger than varmints.
Technical Information
•Caliber: 30
•Bullet Diameter: 0.308
•Bullet Weight: 175 Grains
•Bullet Style: Polymer Tip Boat Tail
Ballistics Information
•Sectional Density: 0.264
•Ballistic Coefficient: 0.545
This is NOT LOADED ammunition
