NOSLER 30-30(.308) 170gr RN BULLET Partition 50/bx
$120.00
The Nosler Partition is still the benchmark by which all modern bullets are measured. Nosler’s special lead-alloy, dual-core provides superior mushrooming characteristics at virtually all impact velocities. The fully tapered copper-alloy jacket ruptures instantly at the thin jacket mouth, yet the gradual thickening along the bullet’s axis controls expansion and curls the jacket uniformly outward at high and low velocities. Nosler’s integral partition supports the expanded mushroom and retains the rear lead-alloy core. The enclosed rear core retains more than two-thirds of the original bullet weight for deep penetration. Every Partition® bullet in the Nosler® line delivers optimum length, weight and ogive design for maximum in-flight and terminal performance.
This is not loaded ammunition.
7 in stock
The Nosler Partition is still the benchmark by which all modern bullets are measured. Nosler’s special lead-alloy, dual-core provides superior mushrooming characteristics at virtually all impact velocities. The fully tapered copper-alloy jacket ruptures instantly at the thin jacket mouth, yet the gradual thickening along the bullet’s axis controls expansion and curls the jacket uniformly outward at high and low velocities. Nosler’s integral partition supports the expanded mushroom and retains the rear lead-alloy core. The enclosed rear core retains more than two-thirds of the original bullet weight for deep penetration. Every Partition® bullet in the Nosler® line delivers optimum length, weight and ogive design for maximum in-flight and terminal performance.
This is not loaded ammunition.
| Weight | 1.3 lbs |
|---|
Related products
Barnes – TTSX Bullets 30cal (308 Dia)165gr Spitzer 50/Box
Product Information:
The Tipped TSX features a 100-percent copper body with rings cut into the shank. A polymer tip boosts the ballistic coefficient, improves long-range ballistics and provides fast expansion. The four razor sharp cutting petals double the bullet diameter making delivering ''dead right there'' performance. These revolutionary bullets from Barnes are made of 100% copper and contain no lead. Barnes recommends initially seating bullets 0.050'' off the lands. Best accuracy will be found from 0.030'' to 0.070'' depending on the rifle. This is not loaded ammunition.Technical Information:
•Caliber: 30 •Bullet Diameter: 0.308 •Bullet Weight: 165 Grains •Bullet Length: 1.388'' •Bullet Style: Spitzer Boat Tail •Bullet Coating: Non-coated
Ballistics Information: •Sectional Density: 0.248 •Ballistic Coefficient: 0.442
CamPro – 30cal (.308) 147gr FMJBT Bullet 500/Bag
Product Information
CAMPRO bullets offer one of the highest quality and value on the market. You now have the opportunity to use the same quality during competitions and while you practice.
These full metal jacket bullets feature a copper jacket with lead core
Experience an ultra-precise shot—bullet after bullet.
Hornady – 30cal (.308) 165gr SST BULLET SuperShok 100/Box
Product Information
Hornady SST Bullets combine proven Hornady performance with a high ballistic coefficient. The sharp, pointed polymer tip creates a fast, flat shooting bullet. The SST features a one-piece core and jacket strengthened in critical areas, to deliver controlled expansion and superior weight retention. Featuring Hornady’s trade mark InterLock ring system, this bullet’s core and jacket remain locked solid during expansion, creating massive wound channels.
Technical Information:
•Caliber: 30
•Bullet Diameter: .308”
•Bullet Weight: 165 Grains
•Bullet Style: SST Boat Tail
Ballistics Information:
•Sectional Density: 0.248
•Ballistic Coefficient:0.447
This is NOT LOADED ammunition.
Hornady 30c (.308) 178gr ELD MATCH BULLET 100/Box
Product Information
ELD Match bullets are technologically advanced, enhanced accuracy target bullets featuring Heat Shield tips with the PERFECT MEPLAT (tip point) combined with numerous design features that deliver the highest-in-class ballistic coefficients, superior accuracy and extreme consistency from bullet-to-bullet, lot-to-lot. All manufacturers conventional polymer tips in high BC bullets melt in flight. Hornady® engineers discovered that conventional bullet tip materials in streamlined, high BC bullets melt and deform. Although not a significant issue affecting moderate BC conventional tipped varmint and hunting bullets, aerodynamic heating causes BC reduction and degradation of accuracy, particularly at extended ranges (400 yds ). To counter this effect, Hornady® identified a heat resistant polymer and developed the patent pending Heat Shield™ tip. This revolutionary new tip creates the perfect meplat (tip) with exceptionally consistent results from bullet-to-bullet and lot-to-lot. Superior accuracy and industry leading ballistic design has been achieved with the ELD Match bullet. An optimum secant ogive and boattail design along with the patent-pending Heat Shield tip produce a bullet with the highest possible ballistic coefficient in its class. Verified by Doppler Radar, ELD Match ballistic coefficients do not vary due to the integrity of the Heat Shield tip. The bullets perform extraordinarily consistently with no BC degradation at extended range. This is NOT LOADED ammunition
Nosler – 30c(.308) 165gr Spitzr BULLET AccuBond 50/Box
Product Information
AccuBond represents the most advanced bonded core bullet technology to date. Through a proprietary bonding process that eliminates voids in the bullet core, AccuBond marries Nosler’s traditional copper-alloy jacket with its special lead-alloy core. The result is a bullet that flies true, penetrates deep and retains its weight—and won’t cause extensive barrel fouling. Nosler AccuBond--the benchmark by which all bonded core bullets will be measured. The fully tapered, heavy alloy jacket is bonded to the special lead alloy core through a proprietary process designed for controlled expansion, deep penetration and 60-70% weight retention. Totally concentric, impact extruded jacket bonds completely to the bullet core for extreme accuracy. The AccuBond bullet's polymer tip resists deformation in the magazine and initiates expansion upon impact. Nosler Solid Base design jacket base acts as a platform for large diameter mushroom. Ballistically engineered Solid Base boat tail configuration combines with the streamlined polymer tip for extreme long range performance. This is NOT LOADED ammunition
