Lyman Case Trimmer Pilot 8mm (8mm Diameter)
$11.00
Lyman Case Trimmer Pilots are required when trimming cases with the Lyman Case Trimmer. The appropriate sized pilot lines the case head square to the cutter.
5 in stock
Related products
HORNADY 30c (.308) 180gr BTSP Interlock BULLET 100/Box
Product Information:
These bullets are from an Estate Sale, (Older packaging, New bullets)
Hornady's traditional line of bullets feature exposed lead tips for controlled expansion and hard-hitting terminal performance. Most have their pioneering secant ogive design — one of the most ballistically efficient profiles ever developed. Most feature Hornady's exclusive InterLock® design — a raised ring inside the jacket that is embedded in the bullet's core that keeps the core and jacket locked together during expansion to retain mass and energy.
- INNER GROOVES: Strategically weaken the upper section of the jacket, ensuring consistent, controlled expansion, even at long range.
- TAPERED JACKET: Jacket thickness is precisely controlled for expansion at all velocities.
- ONE-PIECE CORE: Does not separate like two-piece divided cores. The InterLock® retains more mass and energy for deep penetration and large, consistent wound channels that ensure quick, clean kills.
- CANNELURE: Provides accurate and consistent crimping and also works with InterLock® ring to ensure the core and jacket remain locked during expansion.
- INTERLOCK® RING: The raised InterLock® ring is embedded in the bullet's core, ensuring the core and jacket are locked in one piece during expansion to retain mass and energy.
LEE 22-250 QUICK TRIM DIE
Product Information:
This is a trim die only for the Deluxe Quick Trim Case Trimmer and Value Trim Case Trimmer, both sold separately. With the addition of either of these tools, simply install the appropriate quick trim die in your press and start trimming. No calipers, measurement or adjustment required. Simply install the appropriate quick trim die in your press and start trimming. A click adjustable stop allows trim length adjustment in . 001 of an inch increments. Allows the user to shorten case to a uniform shorter length than standard, reducing trimming frequency. Includes snap on chip catcher.
Trim Die only.
LEE 45 ACP QUICK TRIM DIE
Product Information
This is a trim die only for the Deluxe Quick Trim Case Trimmer and Value Trim Case Trimmer, both sold separately. With the addition of either of these tools, simply install the appropriate quick trim die in your press and start trimming. No calipers, measurement or adjustment required. Simply install the appropriate quick trim die in your press and start trimming. A click adjustable stop allows trim length adjustment in .001 of an inch increments. Allows the user to shorten case to a uniform shorter length than standard, reducing trimming frequency. Note: Requires the purchase of either the Lee Deluxe Quick Trim Case Trimmer 717013 or the Lee Value Trim Case Trimmer 982472 Technical Information: Dies Included: Quick Trim Die. Die Size: Standard 7/8"-14 threaded die Shellholder Required: Yes Shellholder Included: No Accessories Included: Plastic Die Box Notes: Handgun calibers do not come with a die locking ring as it is only needed for the rifle dies.
LEE CASE TRIMMER, CUTTER, & LOCK STUD
Product Information
Quickly trim cases with the Lee Case Trimmer. The Cutter and Lock Stud works for all calibers. A Case Length Gauge and Shell Holder must be ordered for each caliber. Trims cases by hand or use with an electric drill to trim, chamfer and polish cases faster. Squares the mouth for more accurate bullet seating and exit. Includes Cutter and Lock Stud only.
LEE DELUXE CASE CONDITIONING COMBO
Product Information
Deluxe Case Conditioning Combo includes cutter and lock stud, chamfer tool, primer pocket cleaner and power grip shell holder.
Order the appropriate case length gauge and Auto Prime or Auto Bench Prime to complete this kit.
Features:
Cutter and lock stud
- Lock stud locks into drill, thread on the kurled shell holder to hold your brass. Thread case length gauge into cutter for trimming your brass.
- Deburrs and chamfers the inside and outside of case neck. Also used to remove the crimp from primer pockets.
- Features a small and large end to clean out primer pockets so that primers can be fully seated for better accuracy and safety
- Provides a comfortable grip for holding cases during case trimming and chamfering sessions. Install into all popular priming tools that accept Auto Prime shell holders including our Lee Auto Prime and Auto Bench Prime tool (priming tool sold separately).
Lee Quick Trim Die 6.5mm Grendel
Product Information
This is a trim die only for the Deluxe Quick Trim Case Trimmer and Value Trim Case Trimmer, both sold separately. With the addition of either of these tools, simply install the appropriate quick trim die in your press and start trimming. No calipers, measurement or adjustment required. Simply install the appropriate quick trim die in your press and start trimming. A click adjustable stop allows trim length adjustment in .001 of an inch increments. Allows the user to shorten case to a uniform shorter length than standard, reducing trimming frequency. Note: Requires the purchase of either the Lee Deluxe Quick Trim Case Trimmer 717013 or the Lee Value Trim Case Trimmer 982472 Technical Information: Dies Included: Quick Trim Die. Die Size: Standard 7/8"-14 threaded die Shellholder Required: Yes Shellholder Included: No Accessories Included: Plastic Die Box Notes: Handgun calibers do not come with a die locking ring as it is only needed for the rifle dies.
RCBS BRASS BOSS CASE PREP UNIT 120-240VAC
THE BRASS BOSS INCLUDES THE FOLLOWING:
- Inside VLD Chamfering Tool
- Large Primer Pocket Uniformer
- Outside Deburring Tool
- Small Primer Pocket Uniformer
- Case Neck Brushes
- Small Primer Pocket Cleaner
- Small Military Crimp Remover
- Large Primer Pocket Cleaner
- Large Military Crimp Remover
- 120-240 VAC Multi-Country Power Supply
VARIABLE SPEED CONTROL: The Brass Boss puts the speed control at the tip of your finger so you have the ability to fine tune the cut and finish of your brass processing operations.
SIX ROTATING STATIONS: The Brass Boss has 6 individual rotating stations so you can do 6 different operations right in a row to speed up your brass preparation by not having to use 6 individual tools.
