LEE MOULD 454-298-M IMPROVED MINIE
$92.00
Product Information
Lee mold blocks are made from aluminum because of the exceptional molding qualities. The mold cavities are lathe bored for unmatched roundness and size control. Improved Minie molds feature an improved design that is easier to cast and load. This bullet is usually more accurate. Handles are included.
This Lee Single Cavity Mold produces a .454 diameter 298 grain Minie bullet.
1 in stock
Description
Product Information
Lee mold blocks are made from aluminum because of the exceptional molding qualities. The mold cavities are lathe bored for unmatched roundness and size control. Improved Minie molds feature an improved design that is easier to cast and load. This bullet is usually more accurate. Handles are included.
This Lee Single Cavity Mold produces a .454 diameter 298 grain Minie bullet.
Additional information
| Weight | 1.2 lbs |
|---|
Shipping & Delivery
Related products
LEE MOULD .500 ROUND BALL DOUBLE CAVITY
Product Information:
All Lee Mold Blocks are made from aluminum because of the exceptional molding qualities and are CNC machined for unmatched roundness and size control. Lee Round Ball Molds have tangential cut off which eliminates the objectional nib at the sprue. Handles and sprue plate are included.
This Lee Single Cavity Mold produces a .500 diameter Ball, 187.64 grains. Handles included.
LEE MOULD 358-125-RF SIX CAVITY
Product Information
These are made for heavy duty volume production. The mold and blocks have steel bushing and alignment pins for lasting precision. Price includes a cam operated sprue plate to eliminate the pounding common to ordinary molds. The sprue plate is hard anodized and held down with wave washers at each end. No finer mold can be purchased at any price.
Lee Six Cavity Mold produces a .358 diameter 125 grain round nose bullet suitable for cartridges like 38 Special, 38 S&W, 38 Colt New Police, 357 mag, etc. Bullet Mold lube and handles sold separately.
- Ballistic Coefficient = .116
- Bullet Overall Length = .540 inches.
- Distance from the crimp groove to the nose of the bullet = .275 inches.
LEE MOULD 358-150-1R SIX CAVITY
Product Information
Lee mold blocks are made from aluminum because of the exceptional molding qualities. The mold cavities are lathe bored for unmatched roundness and size control. Lee Six Cavity Commercial Quality Molds are made for heavy-duty volume production. The mold and blocks have steel bushing and alignment pins for lasting precision. They include a cam operated sprue plate to eliminate the pounding common to ordinary molds. The sprue plate is hard anodized and held down with wave washers at each end. Handles not included.
Lee 6 cavity block produces a .358 diameter 150 grain Round nose bullet suitable for cartridges like 38 Special, 38 S&W, 38 Colt New Police, 357 Mag. Bullet Mold lube and handles sold separately.
- Ballistic Coefficient .131
- Bullet Overall Length = .643 inches
- Distance from crimp groove to the nose of the bullet = .288 inches
LEE MOULD 358-158-RF SIX CAVITY
Product Information
Designed for volume production, the Lee 6-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are CNC machined for unmatched roundness and size control. Lee 6-Cavity molds come with a cam operated, hard-anodized sprue plate which is held tightly with tempered spring washers at each end. Weights given are Lee's weights with suggested alloy; actual weight may vary due to alloy mixture used. Handles ARE NOT included (#90005). Material: Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate Cavities: 6 Notes: Handles to open and shut the mold are sold separately item# 117-892 A note from Lee Precision on their bullet molds: Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity, reducing the diameter of the bullets cast from the treated mold. Instead, Lee Precision recommends smoking the mold with a wooden match, beeswax candle or a butane lighter as described in their provided bullet mold instructions.
LEE MOULD 379-250-RF DBL CAVITY
Product Information
Lee 2-Cavity Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition, aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lee’s weights with suggested alloy; actual weight may vary due to the alloy mixture used. Lee Double Cavity Mold produces a .379 diameter 250 grain round with flat nose bullet suitable for cartridges like 375 WIN and 38/55. Technical Information: Material: Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate Cavities: 2 Features: Tangential cut off which helps to eliminate the nip at the sprue cut off Includes: Hardwood Handles
LEE MOULD C312-155-2R SIX CAVITY
Product Information
Lee mold blocks are made from aluminum because of the exceptional molding qualities. The mold cavities are lathe bored for unmatched roundness and size control. Lee Six Cavity Commercial Quality Molds are made for heavy-duty volume production. The mold and blocks have steel bushing and alignment pins for lasting precision. They include a cam operated sprue plate to eliminate the pounding common to ordinary molds. The sprue plate is hard anodized and held down with wave washers at each end. Handles not included.
This Lee Six Cavity Bullet Mold produces a .312 diameter 155 grain round nose bullet suitable for cartridges like 7.62 x 39.
LEE MOULD C324-175-1R DBL CAVITY
Product Information:
Lee 2-Cavity Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition, aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lee's weights with suggested alloy; actual weight may vary due to the alloy mixture used. This Lee Double Cavity Mold produces a .324 diameter 175 grain round nose bullet suitable for cartridges like 8MM. Technical Information: Material: Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate Cavities: 2 Features: Tangential cut off which helps to eliminate the nip at the sprue cut off Includes: Hardwood Handles
LEE MOULD C452-300-RF SIX CAVITY
Product Information
Lee mold blocks are made from aluminum because of the exceptional molding qualities. The mold cavities are lathe bored for unmatched roundness and size control. Lee Six Cavity Commercial Quality Molds are made for heavy-duty volume production. The mold and blocks have steel bushing and alignment pins for lasting precision. They include a cam operated sprue plate to eliminate the pounding common to ordinary molds. The sprue plate is hard anodized and held down with wave washers at each end. Handles not included.
Lee 6 cavity block produces a .452 diameter 300 grain round nose bullet suitable for cartridges like 45 Colt, 454 Casull, etc. Bullet Mold lube and handles sold separately.
