Sold out
LEE – DOUBLE DISK KIT
$19.25
Product Information
For use with Lee Auto-Disk Powder Measures. Raises the hopper so you can stack two powder disks. This not only doubles the capacity of the disks but it makes very find adjustments possible. Most powders can be adjusted up or down .1 grain with different combinations of disks. Complete listing of combinations, 4 extra disks, screws and risers are included.
Out of stock
Description
Product Information
For use with Lee Auto-Disk Powder Measures. Raises the hopper so you can stack two powder disks. This not only doubles the capacity of the disks but it makes very find adjustments possible. Most powders can be adjusted up or down .1 grain with different combinations of disks. Complete listing of combinations, 4 extra disks, screws and risers are included.
Additional information
| Weight | 0.4 lbs |
|---|---|
| Brand |
LEE |
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Shipping & Delivery
Related products
DILLON – RL550B/650 POWDER MEASURE
Product Information
The Dillon Precision Powder Measure for the RL 550 Series and XL 750/650 Reloading Machines represents the best in accurate, reliable and repeatable performance. Accurate to within +/- .10 grain the Dillon Powder Measure provides you with the speed and performance that the modern reloader demands. Perfect for competition reloading as well as hunting and recreational uses the Dillon Precision Powder Measure is the perfect accompaniment to The World's Finest Reloading Machines.
The powder measure is case activated; it will only drop powder if a case is present. When a case is present the powder bar will travel it's full length until is flush with the body of the powder measure. This allows the powder bar to align with the powder funnel to drop the powder charge. The case activated feature saves you from messy spills while you setup your press or if for some reason a case is not present when you cycle the press.
The Dillon Precision Powder Measure uses an adjustable volumetric powder bar to regulate charge weights. This is accomplished by adjusting a screw on the end of the powder bar which in turn regulates the size of the volume into which the powder will drop. You must use a reliable scale to set the correct charge weight as you adjust the volume the powder bar will drop. Dillon Precision manufactures four types of powder bars:
Hornady – POWDER MEASURE PISTOL METERING INSERT L-N-L
Product Information
The Hornady Lock-N-Load Handgun Metering Assembly is the perfect tool for the reloader looking to improve the function of their Hornady Lock-N-Load Powder Measure. The Handgun Metering Assembly features an adjustment lock ring, which allows settings to be locked in place permanently for a favorite load. The assembly is designed to throw charges of pistol powders between 0.5 to 17 grains.
Hornady – POWDER MEASURE STANDARD METERING INSERT L-N-L
The Hornady Lock-N-Load Powder Measure Standard Metering Assembly is the perfect tool for the reloader looking to improve the function of their Hornady Lock-N-Load Powder Measure. The Standard Metering Assembly features an adjustment lock ring, which allows settings to be locked in place permanently for a favorite load. Measures approximately 5 to 100 grains of typical rifle powder. Will not work with the Lock-N-Load Bench Rest or Black Powder Measurers. (Not compatible with the Bench Rest Grade or Black Powder Measure.)
LEE – LONG & Short CHARGING DIE kit
Product Information
Lee Short and Long Charging Dies are included in this kit for use with the Auto-Disk, Pro Auto-Disk and Auto-Drum Powder Measure. Works with cases .860 to 2.620 inches long, and bullet diameters .223 and larger.
Works the same as the pistol Powder Through Expanding Die, except it does not expand the case mouth. Rifle case expansion is done in the Sizing die.
LEE – LONG CHARGING DIE
Product Information
Lee Long Charging Die is for use with the Auto-Disk, Pro Auto-Disk and Auto-Drum Powder Measure. Works with cases 1.760 to 2.620 inches long (223 Rem to 300 Win Mag). It works the same as the pistol powder through expanding dies except it doesn’t expand the case mouth. Rifle case expansion is normally done in the sizing die.
Lee Auto-Disk, Auto-Drum Rifle Powder Short Charging Die
Product Information
The Lee Short Charging Die is for use with the Lee Auto-Disk, Pro Auto-Disk and Auto-Drum Powder Measure. Designed to work with cases .860 to 1.760 inches long (22 Hornet to 223 Rem), and bullet diameter .223 and larger due to powder bridging. The rifle charging die works the same as the pistol powder through expanding die, except it doesn't expand the case mouth. Rifle case expansion is done in the sizing die. For cases 1.760 to 2.620 inches long, use the long charging die. Steel die comes packaged in a plastic storage case.
Lyman Pocket Touch Electronic Powder Scale 1500 Grain Capacity
Product Information:
The Pocket-Touch 1500 offers full size performance in a very compact, portable design. The scale is just 2¼” x 4¼” x ¾” yet provides advanced touch screen controls and a full 1500 grain capacity. The scale comes with our patented Universal Funnel Pan, powder scoop and calibration weight. The unique Funnel Pan allows powder charges to be poured directly from the pan into the case. No need for a separate funnel. The scale has an easy to read, lighted display, is powered by (2)AAA batteries (included) and has an Auto Shut-off.
RCBS Powder Scale Pan and Funnel
Product Information
Is your powder funnel always missing when you need it most? The new RCBS Scale Pan Powder Funnel eliminates that problem. The Scale Pan features an integrated powder funnel that allows you to pour the powder directly into the case. The new scale pan is designed for use with electronic scales and powder dispensers.
Reviews
There are no reviews yet.