Hornady Bullet 30 Cal .308 190 Gr Sub-X (300 BLACKOUT)

Product Information:

The Tipped TSX features a 100-percent copper body with rings cut into the shank. A polymer tip boosts the ballistic coefficient, improves long-range ballistics and provides fast expansion. The four razor sharp cutting petals double the bullet diameter making delivering ''dead right there'' performance. These revolutionary bullets from Barnes are made of 100% copper and contain no lead. Barnes recommends initially seating bullets 0.050'' off the lands. Best accuracy will be found from 0.030'' to 0.070'' depending on the rifle. This is not loaded ammunition.

Technical Information:

•Caliber: 30 •Bullet Diameter: 0.308 •Bullet Weight: 165 Grains •Bullet Length: 1.388'' •Bullet Style: Spitzer Boat Tail •Bullet Coating: Non-coated

Ballistics Information: •Sectional Density: 0.248 •Ballistic Coefficient: 0.442

   

Product Information

ELD Match bullets are technologically advanced, enhanced accuracy target bullets featuring Heat Shield tips with the PERFECT MEPLAT (tip point) combined with numerous design features that deliver the highest-in-class ballistic coefficients, superior accuracy and extreme consistency from bullet-to-bullet, lot-to-lot. All manufacturers conventional polymer tips in high BC bullets melt in flight. Hornady® engineers discovered that conventional bullet tip materials in streamlined, high BC bullets melt and deform. Although not a significant issue affecting moderate BC conventional tipped varmint and hunting bullets, aerodynamic heating causes BC reduction and degradation of accuracy, particularly at extended ranges (400 yds ). To counter this effect, Hornady® identified a heat resistant polymer and developed the patent pending Heat Shield™ tip. This revolutionary new tip creates the perfect meplat (tip) with exceptionally consistent results from bullet-to-bullet and lot-to-lot. Superior accuracy and industry leading ballistic design has been achieved with the ELD Match bullet. An optimum secant ogive and boattail design along with the patent-pending Heat Shield tip produce a bullet with the highest possible ballistic coefficient in its class. Verified by Doppler Radar, ELD Match ballistic coefficients do not vary due to the integrity of the Heat Shield tip. The bullets perform extraordinarily consistently with no BC degradation at extended range. This is NOT LOADED ammunition  

Product Information

AccuBond represents the most advanced bonded core bullet technology to date. Through a proprietary bonding process that eliminates voids in the bullet core, AccuBond marries Nosler’s traditional copper-alloy jacket with its special lead-alloy core. The result is a bullet that flies true, penetrates deep and retains its weight—and won’t cause extensive barrel fouling. Nosler AccuBond--the benchmark by which all bonded core bullets will be measured. The fully tapered, heavy alloy jacket is bonded to the special lead alloy core through a proprietary process designed for controlled expansion, deep penetration and 60-70% weight retention. Totally concentric, impact extruded jacket bonds completely to the bullet core for extreme accuracy. The AccuBond bullet's polymer tip resists deformation in the magazine and initiates expansion upon impact. Nosler Solid Base design jacket base acts as a platform for large diameter mushroom. Ballistically engineered Solid Base boat tail configuration combines with the streamlined polymer tip for extreme long range performance. This is NOT LOADED ammunition.

Product Information

Sierra MatchKing rifle bullets are super-accurate bullets with very thin jackets and are held to exacting tolerances in diameter and weight. Their accuracy has been acclaimed worldwide and they have been used to win more target competitions than all target bullets from other manufacturers combined. Weight retention is held to within /- 0.3 grain. Sierra has enhanced a segment of the MatchKing line by adding the acetal resin tip, thus crowning the Tipped MatchKing (TMK) bullet line. The major advantage of adding a tip to the bullet is the reduction of drag, producing a more favorable ballistic coefficient. Due to the ballistic advantage that the tip provides, the 168 Tipped MatchKing (TMK) will stay supersonic at 1,000 yards at normal .308 Winchester velocities, unlike its untipped counterpart. The Tipped MatchKing (TMK) bullet is an excellent choice for Palma and F-Class (FTR / F Open) matches, as well as 3-Gun and various other competitions. Although the MatchKing line is recognized around the world for record setting accuracy, like their untipped counterparts, Tipped MatchKing (TMK) bullets are not recommended for hunting anything larger than varmints. This is not loaded ammunition. Technical Information: •Caliber: 30 •Bullet Diameter: 0.308 •Bullet Weight: 168 Grains •Bullet Style: Polymer Tip Boat Tail Ballistics Information •Sectional Density: 0.253 •Ballistic Coefficient: 0.535 This is NOT LOADED ammunition