Sold out
DILLON RT50, 50 BMG ELECTRIC CASE TRIMMER
$650.00
Out of stock
Description
RT-50, 50 BMG Electric Case Trimmer
- 1 1/2″ thread die, fits Dillon BFR Loading Machine as well as the RCBS and Hornady 50BMG loading tools.
- Trim die holds on the case neck only, does not size the shoulder or body of the case.
- Industry standard 1 1/2″-12 UNF threaded die body
- 1/4 Horsepower motor
- Replaceable multi-sided carbide cutter
- Quick disconnect powercord
- Vacuum removal of chips, (vacuum not included)
- Quicker chatter-less trimming than by hand
- Includes trim die for 50 BMG
Additional information
| Weight | 10 lbs |
|---|
Shipping & Delivery
Related products
LEE 22-250 QUICK TRIM DIE
Product Information:
This is a trim die only for the Deluxe Quick Trim Case Trimmer and Value Trim Case Trimmer, both sold separately. With the addition of either of these tools, simply install the appropriate quick trim die in your press and start trimming. No calipers, measurement or adjustment required. Simply install the appropriate quick trim die in your press and start trimming. A click adjustable stop allows trim length adjustment in . 001 of an inch increments. Allows the user to shorten case to a uniform shorter length than standard, reducing trimming frequency. Includes snap on chip catcher.
Trim Die only.
LEE 7.62x54R QUICK TRIM DIE
Product Information
This is a trim die only for the Deluxe Quick Trim Case Trimmer and Value Trim Case Trimmer, both sold separately. With the addition of either of these tools, simply install the appropriate quick trim die in your press and start trimming. No calipers, measurement or adjustment required. Simply install the appropriate quick trim die in your press and start trimming. A click adjustable stop allows trim length adjustment in .001 of an inch increments. Allows the user to shorten case to a uniform shorter length than standard, reducing trimming frequency.Note:
Requires the purchase of either the Lee Deluxe Quick Trim Case Trimmer 717013 or the Lee Value Trim Case Trimmer 982472
Technical Information:
Dies Included: Quick Trim Die.
Die Size: Standard 7/8"-14 threaded die
Shellholder Required: Yes
Shellholder Included: No
Accessories Included: Plastic Die Box
Notes: Handgun calibers do not come with a die locking ring as it is only needed for the rifle dies.
LEE DELUXE CASE CONDITIONING COMBO
Product Information
Deluxe Case Conditioning Combo includes cutter and lock stud, chamfer tool, primer pocket cleaner and power grip shell holder.
Order the appropriate case length gauge and Auto Prime or Auto Bench Prime to complete this kit.
Features:
Cutter and lock stud
- Lock stud locks into drill, thread on the kurled shell holder to hold your brass. Thread case length gauge into cutter for trimming your brass.
- Deburrs and chamfers the inside and outside of case neck. Also used to remove the crimp from primer pockets.
- Features a small and large end to clean out primer pockets so that primers can be fully seated for better accuracy and safety
- Provides a comfortable grip for holding cases during case trimming and chamfering sessions. Install into all popular priming tools that accept Auto Prime shell holders including our Lee Auto Prime and Auto Bench Prime tool (priming tool sold separately).
RCBS BRASS BOSS CASE PREP UNIT 120-240VAC
THE BRASS BOSS INCLUDES THE FOLLOWING:
- Inside VLD Chamfering Tool
- Large Primer Pocket Uniformer
- Outside Deburring Tool
- Small Primer Pocket Uniformer
- Case Neck Brushes
- Small Primer Pocket Cleaner
- Small Military Crimp Remover
- Large Primer Pocket Cleaner
- Large Military Crimp Remover
- 120-240 VAC Multi-Country Power Supply
VARIABLE SPEED CONTROL: The Brass Boss puts the speed control at the tip of your finger so you have the ability to fine tune the cut and finish of your brass processing operations.
SIX ROTATING STATIONS: The Brass Boss has 6 individual rotating stations so you can do 6 different operations right in a row to speed up your brass preparation by not having to use 6 individual tools.
RCBS TRIM PRO POWER KIT w/ UNIVERSAL SHELL HOLDER
Product Information
Having the same improved spring-loaded universal shell holder
of the manual trimmer, the Power Case Trimmer features a
high torque low RPM motor. The self-feeding spring-fed cutter
makes case trimming easy and accurate. No pushing or feeding
pressure is required, leaving your hands free to do other case
preparation tasks such as chamfering, deburring or primer
pocket cleaning. The positive locking handle and integral power
switch makes operation simple and safe. RCBS has also added
a manual on/off switch to aid in setting case trim length.
Kit includes pilots: .22, .24, .25, .27, .28, .30, .35, .44 and .45.
Note: Cases with rim diameters larger than .625” must be
trimmed on the RCBS90352 High Capacity Trimmer.
