We will re-open the Store once counting is completed.
New orders received this week will ship August 4th 2026
BPI WAD 28ga TPS NON-TOX 5/8 STEEL 3/4 ITX 100/BG
$30.00
The TPS 28ga is a full-length shot column designed specifically for the rigors of modern non-toxic shot, like steel, ITX, and Hevi-Shot. Finally, a wad that will allow you to load almost any type of non-toxic shot for your modern 28ga shotgun. Designed for magnum field loads, the TPS 28 is the grand result of over two years of development.
Maximum capacities of smaller shot sizes are 1 oz. ITX Extreme-13 shot, 7/8 oz. ITX Original-10 shot, and 3/4 oz. steel shot. Capacity will vary greatly according to pellet size and these maximum weights will not necessarily yield the best loads; only testing results will render that decision.
- Length = 1.770″
- Depth = 1.632″
- Gas seal diam. = 0.546″
- Gas seal depth = 0.085″
- Wall thick. = 0.025″ to 0.055″
Product Type: Wad, Multi-Metal capability.
Size: 28-gauge
Typical Loads: 28ga non-toxic and high-capacity field loads.
Maximum Payload: 1 oz. ITX E-13, 7/8 oz. ITX Original-10 shot, and 3/4 oz. steel shot.
The TPS 28ga is a full-length shot column designed specifically for the rigors of modern non-toxic shot, like steel, ITX, and Hevi-Shot. Finally, a wad that will allow you to load almost any type of non-toxic shot for your modern 28ga shotgun. Designed for magnum field loads, the TPS 28 is the grand result of over two years of development.
Maximum capacities of smaller shot sizes are 1 oz. ITX Extreme-13 shot, 7/8 oz. ITX Original-10 shot, and 3/4 oz. steel shot. Capacity will vary greatly according to pellet size and these maximum weights will not necessarily yield the best loads; only testing results will render that decision.
- Length = 1.770″
- Depth = 1.632″
- Gas seal diam. = 0.546″
- Gas seal depth = 0.085″
- Wall thick. = 0.025″ to 0.055″
| Weight | 1 lbs |
|---|
Related products
BPI CORK FILLER/CUSHION WAD 12ga .125″ 250/BAG
Product Information
CLAYBUSTER WAD 12ga 1-1/8 (FIG-8) CB8118 5000/Case
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. This wad was designed for use in 1-1/8 to 1-1/4 oz target or hunting loads in tapered hulls such as Remington or Winchester. 5000/Case
CLAYBUSTER WAD 20ga 7/8oz CB1078 (WAA20) 500/Bag
Product Information
C & D Special Products' Claybuster Wad Line is a well-established economical wad line built for target-shooters and wing-shooters alike. The Claybuster Wad Line can satisfy nearly every target or wing shooting application for reloading. The wads are manufactured with 100% prime resin so a consistent quality product can be expected with every purchase. For use in 7/8 to 1-1/4 oz. skeet, sporting clay or hunting loads. Versatile for most hulls depending on powder volume. Optimum load is 7/8 oz.
CLAYBUSTER WAD SW250-12ga 1-1/4 to 1-3/8 SLUG WAD 250/Bag
Product Information:
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. The Claybuster Slug Wad is a beefy design, which is made to handle the rigors of slugs. Wads are essential for shotshell reloading. They fill extra space in the hull to make sure there is no room for the shot and powder to move around. They also act as a barrier between the powder and shot charges to ensure proper powder ignition, protect the shot from hot gasses and seal gasses behind the shot so that it can be propelled down the barrel. The wad also acts as a dual barrier to protect the barrel from becoming damaged by hard shot and to protect soft shot from becoming deformed by contact with hard barrel steel.
TPS 12ga 2-3/4 Preslit Wad for Non-Toxic Shot 100/Bag
Product Type: Wad, preslit with four slits Made in USA |
