BPI WAD 28ga TPS NON-TOX 5/8 STEEL 3/4 ITX 100/BG
$30.00
The TPS 28ga is a full-length shot column designed specifically for the rigors of modern non-toxic shot, like steel, ITX, and Hevi-Shot. Finally, a wad that will allow you to load almost any type of non-toxic shot for your modern 28ga shotgun. Designed for magnum field loads, the TPS 28 is the grand result of over two years of development.
Maximum capacities of smaller shot sizes are 1 oz. ITX Extreme-13 shot, 7/8 oz. ITX Original-10 shot, and 3/4 oz. steel shot. Capacity will vary greatly according to pellet size and these maximum weights will not necessarily yield the best loads; only testing results will render that decision.
- Length = 1.770″
- Depth = 1.632″
- Gas seal diam. = 0.546″
- Gas seal depth = 0.085″
- Wall thick. = 0.025″ to 0.055″
Product Type: Wad, Multi-Metal capability.
Size: 28-gauge
Typical Loads: 28ga non-toxic and high-capacity field loads.
Maximum Payload: 1 oz. ITX E-13, 7/8 oz. ITX Original-10 shot, and 3/4 oz. steel shot.
10 in stock
The TPS 28ga is a full-length shot column designed specifically for the rigors of modern non-toxic shot, like steel, ITX, and Hevi-Shot. Finally, a wad that will allow you to load almost any type of non-toxic shot for your modern 28ga shotgun. Designed for magnum field loads, the TPS 28 is the grand result of over two years of development.
Maximum capacities of smaller shot sizes are 1 oz. ITX Extreme-13 shot, 7/8 oz. ITX Original-10 shot, and 3/4 oz. steel shot. Capacity will vary greatly according to pellet size and these maximum weights will not necessarily yield the best loads; only testing results will render that decision.
- Length = 1.770″
- Depth = 1.632″
- Gas seal diam. = 0.546″
- Gas seal depth = 0.085″
- Wall thick. = 0.025″ to 0.055″
| Weight | 1 lbs |
|---|
Related products
BPI CORK FILLER/CUSHION WAD 12ga .125″ 250/BAG
Product Information
Claybuster Shotshell Wads 12 Gauge CB2118-12 (Replaces 12S3) 1-1/8 oz 500/Bag
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. CB2118-12 is perfect for 1-1/8 to 1-1/4 oz target or hunting loads and works best in straight wall hulls such as Federal or Fiocchi.
500/Bag
CLAYBUSTER WAD 12ga 1-1/8 (FIG-8) CB8118 5000/Case
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. This wad was designed for use in 1-1/8 to 1-1/4 oz target or hunting loads in tapered hulls such as Remington or Winchester. 5000/Case
CLAYBUSTER WAD 16ga 1 to 1-1/8oz CB0100 (WAA16) 500/BAG
Product Information
Claybuster's Wad Line can satisfy nearly every target or wing shooting application for reloading. The wads are manufactured, and have always been manufactured, with 100% prime resin so a consistent quality product can be expected with every purchase. For use in 1 to 1-1/8 oz. skeet, sporting clays or hunting loads. Versatile for most hulls depending on powder volume. Optimum load is 1 oz.
CLAYBUSTER WAD 16ga 1 to 1-1/8oz CB0100 (WAA16) 5000/Case
Product Information
Claybuster's Wad Line can satisfy nearly every target or wing shooting application for reloading. The wads are manufactured, and have always been manufactured, with 100% prime resin so a consistent quality product can be expected with every purchase. For use in 1 to 1-1/8 oz. skeet, sporting clays or hunting loads. Versatile for most hulls depending on powder volume. Optimum load is 1 oz. 5000/Case
CLAYBUSTER WAD CB1100 12ga 7/8 to 1.0 oz (WAA12SL) 5000/Case
Product Information:
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. This wad is perfect for 7/8 to 1 oz target shooting loads and performs best in tapered hulls.
For use in 7/8 to 1 oz. trap, skeet or sporting clay loads. Performs best in tapered hulls, Remington or Winchester.
Optimum load is 1 oz.
Featuring: Lead-in Taper, this Claybuster Was now features a lead-in taper on the powder cup that reduces the possibility of catching on the insert in the HS Hull.
CLAYBUSTER WAD CB2100 12ga 1oz (12S0) 5000/Case
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. For use in 7/8 to 1-1/8 oz. trap, skeet, sporting clays or hunting loads. Performs best in straight wall cases such as Federal paper or plastic and Fiocchi.
Technical Information
Optimum load is 1 oz.
Wads are made with 100% prime resin for consistency
5000 Pcs/Case
