BERGER 30(.308)230gr HPBT BULLET (HYBRID-TGT) 100/b
$129.50
Technical Notes
- Caliber: 30 Caliber
- Bullet Weight: 230 Grain
- Product Line: Hybrid Target
- G1 BC: 0.717
- G7 BC: 0.368
- G7 Form Factor: 0.941
- Minimum Twist (or faster): 1:10″
- Ogive Style: Hybrid
- Base Style: Boat Tail
- Jacket: J4 Target Jacket
- Sectional Density: 0.346
- Bullet Dia.: 0.308
- OAL: 1.668
- Base to Ogive: 0.875
- Nose Length: 0.859
- Bearing Surface: 0.529
- Boat Tail Length: 0.28
2 in stock
Product Information
Berger Hybrid Target Bullets utilize their industry-leading hybrid ogive, which blends tangent and secant designs to optimize efficiency, reduce wind-drift, and minimize sensitivity to seating depth. The Hybrid Target Bullets are competition proven and a favorite amongst today’s top long range competition shooters. Made with J4 Precision Jackets, the Hybrid’s like all other Berger Bullets, have exacting tolerance and near perfect construction. Berger’s Chief Ballistician, Bryan Litz used his expertise to combine the appropriate shapes for optimum accuracy and performance.
This is not loaded ammunition.
| Weight | 2.8 lbs |
|---|
Related products
BARNES 30-30 (.308) 150gr BULLET TSX-FNFB 50/Box
Product Information
These revolutionary bullets from Barnes are made of 100% copper and contain no lead. When the bullet expands, four razor-sharp cutting petals are created, allowing the bullet to penetrate farther through tough bone and tissue. These bullets usually retain 100% of their original weight, making them a superb choice for hunting. Barnes recommends initially seating bullets 0.050" off the lands. Best accuracy will be found from 0.030" to 0.070" depending on the rifle. This is NOT LOADED ammunition.HORNADY 30c (.308) 168gr ELD MATCH BULLET 100/Box
Product Information
Conventional polymer tips in high BC bullets melt in flight. Hornady engineers discovered that conventional bullet tip materials in streamlined, high BC bullets melt and deform. Although not a significant issue affecting moderate BC conventional tipped varmint and hunting bullets, aerodynamic heating causes BC reduction and degradation of accuracy, particularly at extended ranges (400 yds +). To counter this effect, Hornady identified a heat resistant polymer and developed the patent pending Heat Shield tip. This revolutionary new tip creates the perfect meplat (tip) with exceptionally consistent results from bullet-to-bullet and lot-to-lot. The Heat Shield tip defies the effects of aerodynamic heating and retains its shape to provide a perfect meplat (tip) that is always the same shape. A streamlined secant ogive with optimum boattail design, plus the highly concentric AMP bullet jackets, combined with the patent pending Heat Shield tip creates a supremely accurate, high BC match bullet. ELD-Match bullet BCs are measured with Doppler radar and corrected to standard atmospheric conditions. Features:- Heat Shield Tip forms the perfect meplat
- No tip deformation from aerodynamic heating
- Extremely low drag bullet profile delivers high ballistic coefficients
- Swaged lead core provided uniformity and balance
- AMP jacket design for optimum concentricity and accuracy
Hornady 30cal (.308) 150gr FMJBT Bullet 100/Box
Hornady’s Full Metal Jacket bullets replicate the bullets used in military “ball” ammunition. Full Metal Jacket Bullets are designed so that the bullet is completely encased in a hard metal jacket (except for the base), which is not intended to expand upon impact. The Boat Tail design is to provide a flatter trajectory and long range performance by raising the ballistic coefficient.
These bullets are primarily used for target shooting and plinking. Also ideal for varmint hunting, this bullet will deliver deep penetration and bone shattering results while also protecting the integrity of the pelt at the same time.
Technical Information:
•Sectional Density: 0.226
•Ballistic Coefficient: 0.398
This is NOT LOADED ammunition
