BERGER 25(.257)133gr HPBT BULLET ELITE HUNTER 100bx
$109.00
Technical Notes
Caliber: 25 Caliber
Bullet Weight: 133 Grain
Product Line: Elite Hunter
G1 BC: 0.613
G7 BC: 0.315
G7 Form Factor: 0.914
Minimum Twist (or faster): 1:8″
Ogive Style: Hybrid
Base Style: Boat Tail
Jacket: J4 Hunting Jacket
Sectional Density: 0.288
Bullet Dia.: 0.257
OAL: 1.407
Base to Ogive: 0.73
Nose Length: 0.723
Bearing Surface: 0.447
Boat Tail Length: 0.214
2 in stock
Description
Product Information
Berger’s 25 Caliber 133 Grain Elite Hunter was designed for shooters that want to utilize the long range capabilities of cartridges like the 25 Creedmoor, 25-06 Remington, 25×47, and 25 Precision Rifle Cartridge (PRC) to take animals at longer ranges than traditional hunting Rifle Bullets. The heavier weight and optimized hybrid ogive design allow for the Rifle Bullet to retain energy for effective hydrostatic shock in animals from close ranges to easily out past 500 yards. Ideal for hunting small to medium sized game such as White Tail Deer.
Berger Elite Hunter Rifle Bullets utilize their industry-leading hybrid ogive, which blends tangent and secant designs to optimize efficiency, reduce wind-drift, and minimize sensitivity to seating depth. Elite Hunter Rifle Bullets are identical in construction, shape and performance to the Berger Hybrid Target series, except they utilize a thinner J4 Precision Jacket for rapid expansion on game animals. Elite Hunters are designed to penetrate 2-3″ and then begin to expand and create a massive wound cavity up to 15″. The hydrostatic shock causes most animals to drop immediately.
- Hybrid Ogives blend the best aspects of tangent and secant nose shapes into one ogive. Near the bearing surface, the shape starts off as a tangent, which makes it easy to tune, then transitions to a secant ogive, which results in a flatter trajectory and less wind drift.
- Consistent Core: Our exacting core manufacturing process is one of the reasons when you buy a box of Berger, you don’t have to worry about sorting by weight. This gives you more reliable drop, consistent BC, and better accuracy.
- Boat Tail bullets provide an aerodynamic advantage at longer ranges over their flat base counterparts, especially while transitioning from transonic to subsonic velocities.
- J4 Precision Bullet Jackets are the #1 choice of custom bullet manufacturers. They are the most consistent and concentric copper jackets in the world holding an unprecedented +/- .0003” tolerance. J4 hunting jackets are produced slightly thinner to allow for 2-3″” of penetration before rapidly expanding, producing extreme hydrostatic shock and a massive wound cavity.
Additional information
| Weight | 2.2 lbs |
|---|
Shipping & Delivery
Related products
BARNES 6.5(.264)120g TTSX BULLET TIPPED-BT 50/Box
Product Information:
The TTSX bullet adds a streamlined polymer tip to the company’s best-selling Triple-Shock X Bullet. The polymer tip and re-engineered nose cavity mean even faster expansion. The tip also boosts BC, improving long-range ballistics. The Tipped TSX™ features a 100-percent copper, lead-free body. Multiple rings cut into the shank relieve pressures and virtually eliminate copper fouling. The rings also contribute to the bullet’s outstanding accuracy. Hydraulic pressure forces the nose of the TTSX bullet open, causing it to expand instantly on contact. Double-diameter expansion creates four cutting petals that wreak extensive internal damage. The bullet retains virtually 100 percent of its original weight as it produces pass-through penetration. Count on this bullet to exit the far side of deer or elk, even when heavy bones are struck. Exceptional TTSX performance means clean, quick kills.
This is NOT LOADED ammunition.
HORNADY 6.5MM (.264) 130gr ELD MATCH BULLET 100/Box
Product Information:
ELD Match bullets are technologically advanced, enhanced accuracy target bullets featuring Heat Shield tips with the PERFECT MEPLAT (tip point) combined with numerous design features that deliver the highest-in-class ballistic coefficients, superior accuracy and extreme consistency from bullet-to-bullet, lot-to-lot.
All manufacturers conventional polymer tips in high BC bullets melt in flight. Hornady® engineers discovered that conventional bullet tip materials in streamlined, high BC bullets melt and deform. Although not a significant issue affecting moderate BC conventional tipped varmint and hunting bullets, aerodynamic heating causes BC reduction and degradation of accuracy, particularly at extended ranges (400 yds +). To counter this effect, Hornady® identified a heat resistant polymer and developed the patent pending Heat Shield™ tip. This revolutionary new tip creates the perfect meplat (tip) with exceptionally consistent results from bullet-to-bullet and lot-to-lot.
Superior accuracy and industry leading ballistic design has been achieved with the ELD Match bullet. An optimum secant ogive and boattail design along with the patent-pending Heat Shield tip produce a bullet with the highest possible ballistic coefficient in its class. Verified by Doppler Radar, ELD Match ballistic coefficients do not vary due to the integrity of the Heat Shield tip. The bullets perform extraordinarily consistently with no BC degradation at extended range.
This is NOT LOADED ammunition.
HORNADY 6.5MM (.264) 147gr ELD MATCH BULLET 100/Box
Product Information
Conventional polymer tips in high BC bullets melt in flight. Hornady engineers discovered that conventional bullet tip materials in streamlined, high BC bullets melt and deform. Although not a significant issue affecting moderate BC conventional tipped varmint and hunting bullets, aerodynamic heating causes BC reduction and degradation of accuracy, particularly at extended ranges (400 yds +). To counter this effect, Hornady identified a heat resistant polymer and developed the patent pending Heat Shield tip. This revolutionary new tip creates the perfect meplat (tip) with exceptionally consistent results from bullet-to-bullet and lot-to-lot. The Heat Shield tip defies the effects of aerodynamic heating and retains its shape to provide a perfect meplat (tip) that is always the same shape. A streamlined secant ogive with optimum boattail design, plus the highly concentric AMP bullet jackets, combined with the patent pending Heat Shield tip creates a supremely accurate, high BC match bullet. ELD-Match bullet BCs are measured with Doppler radar and corrected to standard atmospheric conditions. This is NOT LOADED ammunition.
Hornady InterLock Bullets 264 Cal, 6.5mm (.264) 140 Grain SST Boat Tail 100/Box
Product Information
Super Shock Tip Bullets combine proven Hornady performance with a higher ballistic coefficient than available with most hunting bullets. The sharp, pointed polymer tip creates a faster, flatter shooting bullet. With its one-piece core and jacket strengthened in critical areas, the SST delivers much more controlled expansion and superior weight retention than other tipped bullets. Featuring Hornady's trade mark Interlock ring system, this bullet's core and jacket remain locked solid during expansion, creating massive wound channels. This is not loaded ammunition. Ballistics Information- Sectional Density: 0.287
- Ballistic Coefficient:0.520
Sierra – 6.5 (.264) 140gr HPBT BULLET MATCHKING 100/Box
Product Information
For serious rifle competition, you'll be in championship company with MatchKing bullets. The hollow point boat tail design provides that extra margin of ballistic performance match shooters need to fire at long ranges under adverse conditions. Sierra MatchKing bullets have very thin jackets and are held to exacting tolerances in diameter and weight. These Hollow Point Boat Tail bullets have a small meplat to produce a higher ballistic coefficient. Their accuracy has been acclaimed worldwide and they have been used to win more target competitions than all target bullets from other manufacturers combined. The 338 Caliber 300 Grain MatchKing has the highest ballistic coefficient of the MatchKing line. Loaded in magnum cartridges, this bullet is capable of consistent accuracy out past 1000 yards.
SIERRA 6.5 (.264) 142gr HPBT BULLET MATCHKING 500/Box
Product Information:
The 6.5mm/.264 inch bore has recently enjoyed a resurgence of interest. Several rifle manufacturers currently produce 6.5x55mm sporters, exposing a new generation of shooters to this famous old Scandinavian service and hunting cartridge. Competitive HighPower and Silhouette shooters have also shown great interest in the 6.5mm bore size.
The 142 grain #1742 bullet has a longer ogive radius than the 140 grain #1740 bullet and thus a higher ballistic coefficient with less sensitivity to crosswinds.
While they are recognized around the world for record-setting accuracy, MatchKing® and Tipped MatchKing® bullets are not recommended for most hunting applications. Although MatchKing® and Tipped MatchKing® bullets are commonly used for varmint hunting, their design will not provide the same reliable explosive expansion at equivalent velocities in varmints compared to their lightly jacketed Hornet, Blitz or Varminter counterparts.
This is NOT LOADED ammunition.
This bullet requires a barrel twist rate of 1x8” or faster.
