BARNES 30(.308) 200gr LRX BULLET LONG-RANGE BT 50/box
$92.00
Product Information
- Caliber: 30 Cal
- Weight: 200
- Diameter: .308
- S.D.: 0.301
- B.C.: 0.546
- Twist Rate: 1:10″ or Faster
- Length: 1.624
- Box QTY: 50
- Catalog: #30374
This is NOT LOADED ammunition.
5 in stock
Product Information
Barnes LRX bullets have been developed to match the advancements in rifle accuracy and extended-range optics. The LRX features a long profile and boattail design that delivers match-grade accuracy at long range with an incredibly high ballistic coefficient and terminal performance that delivers the quick, clean, ethical kills you’ve come to expect from Barnes.
The all-copper LRX (Long Range X Bullet) opens instantly on impact into four razor-sharp petals that plow a wide wound channel and deposit massive amounts of energy throughout the entire length of the cavity. High weight retention sustains bullet momentum for maximum destruction of tissue, bone and vital organs to effectively and humanely take down game at close and extreme distances.
- Polymer tip boosts ballistic coefficient and initiates rapid expansion
- Specially engineered scored nose cavity expands into four razor-sharp petals and a large frontal diameter for maximum energy transfer and deep penetration on game at close and extreme distances
- Accu-Groove technology for minimal fouling and superior accuracy
- Boattail design with precision heel radius
This is NOT LOADED ammunition.
| Weight | 1.25 lbs |
|---|
Related products
Barnes – TTSX Bullets 30cal (308 Dia)165gr Spitzer 50/Box
Product Information:
The Tipped TSX features a 100-percent copper body with rings cut into the shank. A polymer tip boosts the ballistic coefficient, improves long-range ballistics and provides fast expansion. The four razor sharp cutting petals double the bullet diameter making delivering ''dead right there'' performance. These revolutionary bullets from Barnes are made of 100% copper and contain no lead. Barnes recommends initially seating bullets 0.050'' off the lands. Best accuracy will be found from 0.030'' to 0.070'' depending on the rifle. This is not loaded ammunition.Technical Information:
•Caliber: 30 •Bullet Diameter: 0.308 •Bullet Weight: 165 Grains •Bullet Length: 1.388'' •Bullet Style: Spitzer Boat Tail •Bullet Coating: Non-coated
Ballistics Information: •Sectional Density: 0.248 •Ballistic Coefficient: 0.442
Berry’s – 30M1 CARBINE (.308) 110gr RN BULLET 1000/Box
Product Information
Berry’s bullets begin with a precision-swaged lead core to ensure uniformity. They are then fused with a thick layer of high-grade copper to the core - making Berry’s bullets as accurate as they are attractive. This is NOT LOADED ammunition. Note:(When loading these plated rifle bullets do not exceed a max velocity of 1750 fps.)Hornady – 30c (.308) 178gr A-Max BULLET 100/Bx
Hornady 30c (.308) 178gr ELD MATCH BULLET 100/Box
Product Information
ELD Match bullets are technologically advanced, enhanced accuracy target bullets featuring Heat Shield tips with the PERFECT MEPLAT (tip point) combined with numerous design features that deliver the highest-in-class ballistic coefficients, superior accuracy and extreme consistency from bullet-to-bullet, lot-to-lot. All manufacturers conventional polymer tips in high BC bullets melt in flight. Hornady® engineers discovered that conventional bullet tip materials in streamlined, high BC bullets melt and deform. Although not a significant issue affecting moderate BC conventional tipped varmint and hunting bullets, aerodynamic heating causes BC reduction and degradation of accuracy, particularly at extended ranges (400 yds ). To counter this effect, Hornady® identified a heat resistant polymer and developed the patent pending Heat Shield™ tip. This revolutionary new tip creates the perfect meplat (tip) with exceptionally consistent results from bullet-to-bullet and lot-to-lot. Superior accuracy and industry leading ballistic design has been achieved with the ELD Match bullet. An optimum secant ogive and boattail design along with the patent-pending Heat Shield tip produce a bullet with the highest possible ballistic coefficient in its class. Verified by Doppler Radar, ELD Match ballistic coefficients do not vary due to the integrity of the Heat Shield tip. The bullets perform extraordinarily consistently with no BC degradation at extended range. This is NOT LOADED ammunitionSierra – Tipped MatchKing 175 Grain Polymer Tip 500/Box
Product Information
Sierra MatchKing rifle bullets are super-accurate bullets with very thin jackets and are held to exacting tolerances in diameter and weight. Their accuracy has been acclaimed worldwide and they have been used to win more target competitions than all target bullets from other manufacturers combined. Weight retention is held to within /- 0.3 grain. Sierra has enhanced a segment of the MatchKing line by adding the acetal resin tip, thus crowning the Tipped MatchKing (TMK) bullet line. The major advantage of adding a tip to the bullet is the reduction of drag, producing a more favorable ballistic coefficient. Due to the ballistic advantage that the tip provides, the 168 Tipped MatchKing (TMK) will stay supersonic at 1,000 yards at normal .308 Winchester velocities, unlike its untipped counterpart. The Tipped MatchKing (TMK) bullet is an excellent choice for Palma and F-Class (FTR / F Open) matches, as well as 3-Gun and various other competitions. Although the MatchKing line is recognized around the world for record setting accuracy, like their untipped counterparts, Tipped MatchKing (TMK) bullets are not recommended for hunting anything larger than varmints. Technical Information: •Caliber: 30 •Bullet Diameter: 0.308 •Bullet Weight: 175 Grains •Bullet Style: Polymer Tip Boat Tail Ballistics Information: •Sectional Density: 0.264 •Ballistic Coefficient: 0.545 This is NOT LOADED ammunitionSierra – Tipped MatchKing 30cal (.308) 175 Grain Polymer Tip 100/Box
Product Information
Sierra MatchKing rifle bullets are super-accurate bullets with very thin jackets and are held to exacting tolerances in diameter and weight. Their accuracy has been acclaimed worldwide and they have been used to win more target competitions than all target bullets from other manufacturers combined. Weight retention is held to within /- 0.3 grain. Sierra has enhanced a segment of the MatchKing line by adding the acetal resin tip, thus crowning the Tipped MatchKing (TMK) bullet line. The major advantage of adding a tip to the bullet is the reduction of drag, producing a more favorable ballistic coefficient. Due to the ballistic advantage that the tip provides, the 168 Tipped MatchKing (TMK) will stay supersonic at 1,000 yards at normal .308 Winchester velocities, unlike its untipped counterpart. The Tipped MatchKing (TMK) bullet is an excellent choice for Palma and F-Class (FTR / F Open) matches, as well as 3-Gun and various other competitions. Although the MatchKing line is recognized around the world for record setting accuracy, like their untipped counterparts, Tipped MatchKing (TMK) bullets are not recommended for hunting anything larger than varmints.
Technical Information
•Caliber: 30
•Bullet Diameter: 0.308
•Bullet Weight: 175 Grains
•Bullet Style: Polymer Tip Boat Tail
Ballistics Information
•Sectional Density: 0.264
•Ballistic Coefficient: 0.545
This is NOT LOADED ammunition
