RCBS 223 REMINGTON SMALL BASE FL SIZER X-DIE
$118.00
Product Information
Trim a bottleneck case once—and never trim again with the X Die Small Base Sizer.
The X-Sizer Die looks like a regular Full Length Sizer Die. Its specially designed mandrel has an expander ball and decapping pin attached. The patented design eliminates the need for repeated trimming after an initial trim of .020 inch off the maximum length to standardize the case. The X Die doesn’t shorten the length of the case: The mandrel reduces the growth caused by the case mouth contacting the mandrel during sizing. Because of an extremely close tolerance between the mandrel and die neck wall, the neck wall of the case does not thicken as the case length is pushed back. Cases repeatedly sized in the X-Die will initially grow a few thousandths of an inch, and then stabilize below the maximum case length with no discernable loss of accuracy or case life.
Includes full-length X-Sizer Die only. Shellholder sold separately.
1 in stock
Product Information
Trim a bottleneck case once—and never trim again with the X Die Small Base Sizer.
The X-Sizer Die looks like a regular Full Length Sizer Die. Its specially designed mandrel has an expander ball and decapping pin attached. The patented design eliminates the need for repeated trimming after an initial trim of .020 inch off the maximum length to standardize the case. The X Die doesn’t shorten the length of the case: The mandrel reduces the growth caused by the case mouth contacting the mandrel during sizing. Because of an extremely close tolerance between the mandrel and die neck wall, the neck wall of the case does not thicken as the case length is pushed back. Cases repeatedly sized in the X-Die will initially grow a few thousandths of an inch, and then stabilize below the maximum case length with no discernable loss of accuracy or case life.
Includes full-length X-Sizer Die only. Shellholder sold separately.
| Weight | 0.5 lbs |
|---|
Related products
Dillon – .223/5.56 Rem Carbide 3 Die set
Product Information
For high volume users, such as commercial reloaders, law enforcement agencies, and high power or service rifle competitors, we include a full-length carbide sizing die. Lubrication is still required, but the increased scratch resistance and die longevity of carbide are of great benefit to these groups of users.Dillon Three-Die Rifle Die Sets include a sizing/ depriming die, a bullet seating die and a taper crimp die. Sizing/Depriming Die - The sizing/depriming die is full-length, to minimum tolerances, sizing cases down to function in semi- and full-automatic firearms. We strongly suggest that a headspace case gage be used to correctly adjust the size die. The depriming assembly includes a carbide expander ball for ''squeak-free,'' effortless neck expansion. This expander ball is located in the middle of the depriming stem to take advantage of superior initial leverage for easier extraction. In the event of a stuck case, the design of the depriming assembly allows it to function as a stuck case remover. Bullet Seating Die - Our bullet seating die is internally designed to keep the bullet straight throughout the seating process. Once properly adjusted, the only measurable runout will be that which is inherent in the bullet. Taper Crimp Die - The taper crimp die is also specially configured to center both the case neck and the case body, thereby aligning the entire cartridge for a more uniform crimp. Dillon Rifle Dies are designed to meet the more rigid requirements for both accuracy and precision demanded by today's marksman. A taper crimp die is preferred for loading ammunition intended to be used in semiautomatic firearms with detachable box magazines, and in lever-action firearms with tubular magazines. Brand: Dillon Precision Condition: New Type: Rifle Reloading Dies Model: Carbide Rifle Die Set MPN: 10096 Country of Manufacture: United States Caliber: .223/5.56 Remington
LEE – 303 SAVAGE 3 DIE SET w/Dipper & #R11 S/H
Product Information
Each Lee Precision has been manufacturing high quality, affordable reloading equipment since 1958. Each Pacesetter 3-Die Set includes the exclusive Lee Factory Crimp Die, Full Length Sizer Die and Bullet Seater Die. Each set is made from steel and includes the appropriate Shellholder, Powder Measure, load data, plastic storage box and a two year warranty. Adjustable crimp from slight taper to full roll.
Technical Information:
Dies Included:
•Full Length Sizing Die
•Bullet Seating Die
•Factory Crimp Die
Die Size: 7/8″-14 threads
Shellholder Required:Yes
Shellholder Included: Yes
Notes: 2 Year Warranty
Accessories Included:
•Powder Dipper
•Load Data
•Plastic Storage Box
LEE – 30M1 CARBINE CARBIDE 3 DIE SET w/Dipper & #R7 S/H
We use a solid carbide insert, ground to a special contour that does not leave a belt mark on the case like other carbide dies. With a carbide sizer, no case lube is needed. Sizer also features an unbreakable decapper and built-in stuck case remover. The Powder Through Expanding Die permits charging the case while expanding the case mouth. The Bullet Seat and Feed Die features a free floating bullet seater to insure maximum accuracy.
Includes: Sizer/Decapping Die, Powder Through Expanding Die, Bullet Seat and Feed Die, Shellholder, Powder Dipper and Load Data.
