LEE MOULD TL401-175-SWC SIX CAVITY
$82.00
Product Information
Designed for volume production, the Lee 6-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are CNC machined for unmatched roundness and size control. Lee 6-Cavity molds come with a cam operated, hard-anodized sprue plate which is held tightly with tempered spring washers at each end. Weights given are Lee’s weights with suggested alloy; actual weight may vary due to alloy mixture used. Handles ARE NOT included (#9005).
Technical Information:
Material:
Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
Cavities: 6
Features:
•Rust resistant aluminum blocks
•Lathe bored blocks with steel bushings and alignment pins
2 in stock
Product Information
Designed for volume production, the Lee 6-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are CNC machined for unmatched roundness and size control. Lee 6-Cavity molds come with a cam operated, hard-anodized sprue plate which is held tightly with tempered spring washers at each end. Weights given are Lee’s weights with suggested alloy; actual weight may vary due to alloy mixture used. Handles ARE NOT included (#9005).
Technical Information:
Material:
Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
Cavities: 6
Features:
•Rust resistant aluminum blocks
•Lathe bored blocks with steel bushings and alignment pins
| Weight | 1.5 lbs |
|---|
Related products
LEE – Mould TL356-124-2R Six Cavity
Product Information
Lee 6-Cavity Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition, aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lee's weights with suggested alloy; actual weight may vary due to the alloy mixture used. Technical Information: Material: Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate Cavities: 6 Features: Tangential cut off which helps to eliminate the nip at the sprue cut off Handles NOT INCLUDED! Handles are #9005 6-Cavity Bullet Mold TL356-124-2R 9mm Luger, 38 Super, 380 ACP (356 Diameter) 124 Grain Tumble Lube 2 Ogive Radius
LEE – Mould TL358-158-2R 38 Special, 357 Mag Six Cavity
Designed for volume production, the Lee 6-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are CNC machined for unmatched roundness and size control. Lee 6-Cavity molds come with a cam operated, hard-anodized sprue plate which is held tightly with tempered spring washers at each end. Weights given are Lee’s weights with suggested alloy; actual weight may vary due to alloy mixture used. Handles ARE NOT included (#9005).
Technical Information:
Material: Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
Cavities: 6
Features:
•Rust resistant aluminum blocks
•Lathe bored blocks with steel bushings and alignment pins
Six Cavity Mould TL358-158-2R 38 Special, 357 Magnum, 38 Colt New Police, 38 S&W (358 Diameter) 158 Grain Tumble Lube 2 Ogive Radius
LEE – Mould TL358-158-2R 38 Spl, 357 Mag Double Cavity
Product Information
Lee 2-Cavity Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition, aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lee’s weights with suggested alloy; actual weight may vary due to the alloy mixture used.
Technical Information:
Material: Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
Cavities: 2
Features: Tangential cut off which helps to eliminate the nip at the sprue cut off
16.09 Hardwood Handles.
38 Special, 357 Magnum, 38 Colt New Police, 38 S&W (358 Diameter) 158 Grain Tumble Lube 2 Ogive Radius
LEE – MOULD TL430-240-SWC SIX CAVITY
Lee mold blocks are made from aluminum because of the exceptional molding qualities. The mold cavities are lathe bored for unmatched roundness and size control. Lee Six Cavity Commercial Quality Molds are made for heavy-duty volume production. The mold and blocks have steel bushing and alignment pins for lasting precision. They include a cam operated sprue plate to eliminate the pounding common to ordinary molds. The sprue plate is hard anodized and held down with wave washers at each end.
Handles NOT included.
Handles are #9005
6-Cavity Bullet Mold TL430-240-SWC 44 Special, 44 Remington Magnum, 44-40 WCF (430 Diameter) 240 Grain Tumble Lube Semi-Wadcutter
LEE MOULD 476-400 RF DBL CAVITY
Product Information:
LEE MOULD TL358-148-WC DBL CAVITY
Product Information
Lee 2-Cavity Bullet Molds are a great choice for reloaders looking for a quality mold at an affordable price. Lee machines their mold blocks from aluminum making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition, aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet caster less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lee's weights with suggested alloy; actual weight may vary due to the alloy mixture used. Technical Information: Material: Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate Cavities: 2 Features: Tangential cut off which helps to eliminate the nip at the sprue cut off Includes: Hardwood Handles 38 Special, 357 Magnum, 38 Colt New Police, 38 S&W.
LEE MOULD TL401-175-TC DOUBLE CAVITY
Designed for volume production, the Lee 6-Cavity Bullet Mold blocks are machined from commercial quality aluminum and feature steel bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are CNC machined for unmatched roundness and size control. Lee 6-Cavity molds come with a cam operated, hard-anodized sprue plate which is held tightly with tempered spring washers at each end. Weights given are Lee’s weights with suggested alloy; actual weight may vary due to alloy mixture used. Handles ARE NOT included (#9005).
Technical Information:
Material:
Machined Aluminum Mold Blocks and Hard Anodized Sprue Plate
Cavities: 6
Features:
•Rust resistant aluminum blocks
•Lathe bored blocks with steel bushings and alignment pins
