LEE LOAD-ALL II 12ga SHOT SHELL LOADER 67.5mm
$128.00
Product Information
- 12G LOAD-ALL 67.5mmLee complete reloading tool for 12 gauge with 24 shot and powder bushings. Loads 2 3/4 and 3 inch shells. Nothing else required. Press has been modified in last station to accommodate 67.5mm shells. Includes an extra white bushing** in .224 for Nobel powders, along with Special Notes and Charge Table regarding the extra Bushing. **Bushing not shown in photoWarning: If press is converted over to 16 or 20 Ga, it will no longer be compatible with 67.5mm shells.
Note: this press cannot load 2 1/2″ or 3 1/2″ shot shells
LEE LOAD-ALL II shotgun shells not only look better than those loaded on machines costing hundreds of dollars, but they usually have more uniform velocity and patterns.
Twenty-four shot and powder bushings are included free. The bushings alone can cost several dollars each from other manufacturers – and they’re not as accurate as those made by Lee. Only Lee supplies molded bushings.
This is a time proven tool. There are hundreds of thousands in use world-wide. In over forty years, we have yet to see one worn out.
- Capable of reloading 200 shells per hour
- Hopper holds over 5 lbs. of shot, enough to load over 125 rounds
- Built-in primer catcher with an easy-to-empty door right up front
- Recesses at every station for speedy shell positioning
- Easy and economical gauge conversion
- Optional primer feeder so you never need to touch the primer from the box to the shell
- Adjustable from the standard 2 3/4 shell, up to 3 inch shell
1 in stock
Product Information
12G LOAD-ALL 67.5mm
Lee complete reloading tool for 12 gauge with 24 shot and powder bushings. Loads 2 3/4 and 3 inch shells. Nothing else required. Press has been modified in last station to accommodate 67.5mm shells. Includes an extra white bushing** in .224 for Nobel powders, along with Special Notes and Charge Table regarding the extra Bushing. **Bushing not shown in photo
Warning: If press is converted over to 16 or 20 Ga, it will no longer be compatible with 67.5mm shells.
Note: this press cannot load 2 1/2″ or 3 1/2″ shot shells
LEE LOAD-ALL II shotgun shells not only look better than those loaded on machines costing hundreds of dollars, but they usually have more uniform velocity and patterns.
Twenty-four shot and powder bushings are included free. The bushings alone can cost several dollars each from other manufacturers – and they’re not as accurate as those made by Lee. Only Lee supplies molded bushings.
This is a time proven tool. There are hundreds of thousands in use world-wide. In over forty years, we have yet to see one worn out.
- Capable of reloading 200 shells per hour
- Hopper holds over 5 lbs. of shot, enough to load over 125 rounds
- Built-in primer catcher with an easy-to-empty door right up front
- Recesses at every station for speedy shell positioning
- Easy and economical gauge conversion
- Optional primer feeder so you never need to touch the primer from the box to the shell
- Adjustable from the standard 2 3/4 shell, up to 3 inch shell
| Weight | 5 lbs |
|---|
Related products
LEE – LOAD-ALL II 12ga SHOT SHELL LOADER w/24 BUSHINGS
- Capable of reloading 200 shells per hour
- Hopper holds over 5 lbs. of shot, enough to load over 125 rounds
- Built-in primer catcher with an easy-to-empty door right up front
- Recesses at every station for speedy shell positioning
- Easy and economical gauge conversion
- Optional primer feeder so you never need to touch the primer from the box to the shell
- Adjustable from the standard 2 3/4 shell, up to 3 inch shell
LEE LOAD-ALL II 20ga SHOT SHELL LOADER w/24 BUSHING
Product Information
The Lee Load-All 2 offers the reloader a an inexpensive option when it comes to making cost effective shotgun shells. This press includes eight shot bushings that measure 7/8, 1, 1-1/8, 1-1/4, 1-1/2, 1-3/4 and 1-7/8 ounces. The 1-7/8 ounce bushing is a small tab that fits inside the charge bar. Also included with this press are sixteen powder bushings that measure: 095, 100, 105, 110, 116, 122, 128, 134, 141, 148, 155, 163, 171, 180, 189 and 198 cubic centimeters. Unlike other more expensive presses the Lee Load-All 2 also comes with 6 and 8 point crimp starters, safety charge bar, steel sizing ring, aluminum plate for primer catcher, spare wad guide, primer guide, spring and pin, one screw and two bolts with locking nuts. Additionally the 12 and 20 gauge models can load 3″ shells without needing an expensive conversion kit.
Technical Information:
Press Type: Single Stage
Gauge: 20
Shell Length: 2-3/4″, 3″
Frame Material: Steel frame, plastic base
Priming Feature: Single priming the reloader has to place the primer in the press, there is an optional primer feeder available separately
Accessories:
- Comes with 6 and 8 point crimp starters
- Safety charge bar
- Steel sizing ring
- Aluminum plate for primer catcher
- Spare wad guide
- Primer guide
- Spring and pin
- One screw and two bolts with locking nuts.
Charge Bar Shot Weight: Comes with 8 shot bushings
- Bushings included measure 7/8, 1, 1-1/8, 1-1/4, 1-1/2, 1-3/4 and 1-7/8 ounces
Powder Bushings Included: Yes
- Included bushing measure 095, 100, 105, 110, 116, 122, 128, 134, 141, 148, 155, 163, 171, 180, 189 and 198 cubic centimeters
MEC 600 JR 410g 2.5″ MARK V SHOTSHELL LOADER
Product Information
- Time-tested excellence is built into this single-stage reloader featuring a quick, simple operation with minimal effort.
- Cam-Action crimp die ensures each shell is returned to its original conditon.
- The one-piece Spindex Crimp Starter aligns correctly with original shell creases to give a perfect crimp every time.
- Load four to six boxes per hour.
- Adjustable for 3" shells
