LEE 6.5mm CREEDMOOR COLLET NECK DIE ONLY
$48.00
Product Information
Lee Collet 6.5 Creedmoor Necksizing Die only that uses a Collet to squeeze a Mandrel, creating a precisely aligned case neck while reducing run out. Sizes just the neck and requires no lubrication.
Undersized flash hole decap mandrel sold separately.
.002″ undersize decap mandrel sold separately.
1 in stock
Product Information
Lee Collet 6.5 Creedmoor Necksizing Die only that uses a Collet to squeeze a Mandrel, creating a precisely aligned case neck while reducing run out. Sizes just the neck and requires no lubrication.
Undersized flash hole decap mandrel sold separately.
.002″ undersize decap mandrel sold separately.
| Weight | .5 lbs |
|---|
Related products
Dillon – .308 Win Carbide 3 Die set
Product Information
For high volume users, such as commercial reloaders, law enforcement agencies, and high power or service rifle competitors, we include a full-length carbide sizing die. Lubrication is still required, but the increased scratch resistance and die longevity of carbide are of great benefit to these groups of users.Dillon Three-Die Rifle Die Sets include a sizing/ depriming die, a bullet seating die and a taper crimp die. Sizing/Depriming Die - The sizing/depriming die is full-length, to minimum tolerances, sizing cases down to function in semi- and full-automatic firearms. We strongly suggest that a headspace case gage be used to correctly adjust the size die. The depriming assembly includes a carbide expander ball for ''squeak-free,'' effortless neck expansion. This expander ball is located in the middle of the depriming stem to take advantage of superior initial leverage for easier extraction. In the event of a stuck case, the design of the depriming assembly allows it to function as a stuck case remover. Bullet Seating Die - Our bullet seating die is internally designed to keep the bullet straight throughout the seating process. Once properly adjusted, the only measurable runout will be that which is inherent in the bullet. Taper Crimp Die - The taper crimp die is also specially configured to center both the case neck and the case body, thereby aligning the entire cartridge for a more uniform crimp. Dillon Rifle Dies are designed to meet the more rigid requirements for both accuracy and precision demanded by today's marksman. A taper crimp die is preferred for loading ammunition intended to be used in semiautomatic firearms with detachable box magazines, and in lever-action firearms with tubular magazines. Brand: Dillon Precision Condition: New Type: Rifle Reloading Dies Model: Carbide Rifle Die Set MPN: 10793 Country of Manufacture: United States Caliber: .308 Win
Hornady – New Dimension 3-Die Set 45-70 Gov’t
Product Information
The Hornady Custom Grade New Dimension 3-Die Set is a great die set for the avid reloader. This die set includes a Custom Grade New Dimension (CGND) Full Length Sizer Die and a CGND Seating Die. The Full Length Sizer Die features a Zip Spindle, with a series of light threads cut on the spindle and spindle collet. This eliminates spindle slippage, and makes tightening the spindle lock a breeze when making adjustments. The floating bullet alignment sleeve and stem in the CGND Seating Die improve bullet seating and accuracy by pre-aligning the bullet and case before seating. The seating die also applies a roll crimp to secure the bullet in the case. The CGND die set comes packaged in a plastic storage box, and includes two Sure-Loc rings. Shellholder is sold separately.
LEE – 223 REM 3 DIE SET w/FACTORY CRIMP w/Dipper & #R4 S/H
Product Information
Lee PaceSetter Dies now include the exclusive Lee Factory Crimp Die to produce factory-like ammunition with improved utility and accuracy. The die set also includes a conventional bullet seater and roll crimper. You can choose the type of crimp you desire. They also include a shell holder, powder dipper, load data and storage box.
LEE – 30-30 WIN 3 DIE SET w/FACTORY CRIMP w/Dipper & #R3 S/H
Product Information
Lee PaceSetter Dies now include the exclusive Lee Factory Crimp Die to produce factory-like ammunition with improved utility and accuracy. The die set also includes a conventional bullet seater and roll crimper. You can choose the type of crimp you desire. They also include a shell holder, powder dipper, load data and storage box.
LEE – 300 BLACKOUT AAC 3-DIE SET w/FACTORY CRIMP w/Dipper & #R4 S/H
Product Information
Lee PaceSetter Dies now include the exclusive Lee Factory Crimp Die to produce factory-like ammunition with improved utility and accuracy. The die set also includes a conventional bullet seater and roll crimper. You can choose the type of crimp you desire. They also include a shell holder, powder dipper, load data and storage box.
LEE – 7.5 x 55 SWISS 3 DIE SET w/FACTORY CRIMP w/Dipper & #R3 S/H
Product Information
Lee PaceSetter Dies now include the exclusive Lee Factory Crimp Die to produce factory-like ammunition with improved utility and accuracy. The die set also includes a conventional bullet seater and roll crimper. You can choose the type of crimp you desire. They also include a shell holder, powder dipper, load data and storage box.
LEE – 8x57mm MAUSER (8mm Mauser) 3-DIE SET w/Dipper & #R2 S/H
Product Information
Each Lee Precision has been manufacturing high quality, affordable reloading equipment since 1958. Each Pacesetter 3-Die Set includes the exclusive Lee Factory Crimp Die, Full Length Sizer Die and Bullet Seater Die. Each set is made from steel and includes the appropriate Shellholder, Powder Measure, load data, plastic storage box and a two year warranty. Adjustable crimp from slight taper to full roll.
Technical Information:
Dies Included:
•Full Length Sizing Die
•Bullet Seating Die
•Factory Crimp Die
Die Size: 7/8″-14 threads
Shellholder Included: Yes
Notes: 2 Year Warranty
Accessories Included:
•Powder Dipper
•Load Data
•Plastic Storage Box
