LEE 6.5 Grendel COLLET NECK DIE SET
$80.00
Product Information
Lee 6.5 Grendel Collet Die Set includes a Collet Die that uses a collet to squeeze a mandrel creating a precisely aligned case neck while reducing run out, Dead Length Bullet Seater Die, Shell Holder, Powder Dipper and Instructions/Load Data.
1 in stock
Product Information
Lee 6.5 Grendel Collet Die Set includes a Collet Die that uses a collet to squeeze a mandrel creating a precisely aligned case neck while reducing run out, Dead Length Bullet Seater Die, Shell Holder, Powder Dipper and Instructions/Load Data.
| Weight | 1 lbs |
|---|
Related products
Dillon – .308 Win Carbide 3 Die set
Product Information
For high volume users, such as commercial reloaders, law enforcement agencies, and high power or service rifle competitors, we include a full-length carbide sizing die. Lubrication is still required, but the increased scratch resistance and die longevity of carbide are of great benefit to these groups of users.Dillon Three-Die Rifle Die Sets include a sizing/ depriming die, a bullet seating die and a taper crimp die. Sizing/Depriming Die - The sizing/depriming die is full-length, to minimum tolerances, sizing cases down to function in semi- and full-automatic firearms. We strongly suggest that a headspace case gage be used to correctly adjust the size die. The depriming assembly includes a carbide expander ball for ''squeak-free,'' effortless neck expansion. This expander ball is located in the middle of the depriming stem to take advantage of superior initial leverage for easier extraction. In the event of a stuck case, the design of the depriming assembly allows it to function as a stuck case remover. Bullet Seating Die - Our bullet seating die is internally designed to keep the bullet straight throughout the seating process. Once properly adjusted, the only measurable runout will be that which is inherent in the bullet. Taper Crimp Die - The taper crimp die is also specially configured to center both the case neck and the case body, thereby aligning the entire cartridge for a more uniform crimp. Dillon Rifle Dies are designed to meet the more rigid requirements for both accuracy and precision demanded by today's marksman. A taper crimp die is preferred for loading ammunition intended to be used in semiautomatic firearms with detachable box magazines, and in lever-action firearms with tubular magazines. Brand: Dillon Precision Condition: New Type: Rifle Reloading Dies Model: Carbide Rifle Die Set MPN: 10793 Country of Manufacture: United States Caliber: .308 Win
Hornady – New Dimension 3-Die Set 45-70 Gov’t
Product Information
The Hornady Custom Grade New Dimension 3-Die Set is a great die set for the avid reloader. This die set includes a Custom Grade New Dimension (CGND) Full Length Sizer Die and a CGND Seating Die. The Full Length Sizer Die features a Zip Spindle, with a series of light threads cut on the spindle and spindle collet. This eliminates spindle slippage, and makes tightening the spindle lock a breeze when making adjustments. The floating bullet alignment sleeve and stem in the CGND Seating Die improve bullet seating and accuracy by pre-aligning the bullet and case before seating. The seating die also applies a roll crimp to secure the bullet in the case. The CGND die set comes packaged in a plastic storage box, and includes two Sure-Loc rings. Shellholder is sold separately.
LEE – .223 REM ULTIMATE 4 DIE SET, S/H #4
Product Information
Choose this die set for maximum versatility.
The set features a full length-resizing die to return brass to factory new dimensions, perfect for reloading brass fired in other guns. The Collet Neck sizing die is used on your fire formed brass giving you best possible accuracy. No case lube required and cases last almost forever. The Easy Adjust Dead Length Bullet seating die fool-proofs the bullet seating adjustment, and assures perfect seating depth every time. The Factory Crimp die provides a secure crimp on bullets with or without a crimp groove. In most cases it helps accuracy by providing a uniform higher start pressure and gives the finished cartridge Factory like accuracy and dependability. The set is complete, with shell holder, powder measure and famous Lee load data featuring all common brands of powder organized in a easy to read logical format.
Includes:
•Full length resizing Die
•Collet Neck sizing Die
•Easy adjust dead length bullet Seating Die
•Factory Crimp Die
•Shell holder, Powder measure, & Lee load data
LEE – 30M1 CARBINE CARBIDE 3 DIE SET w/Dipper & #R7 S/H
We use a solid carbide insert, ground to a special contour that does not leave a belt mark on the case like other carbide dies. With a carbide sizer, no case lube is needed. Sizer also features an unbreakable decapper and built-in stuck case remover. The Powder Through Expanding Die permits charging the case while expanding the case mouth. The Bullet Seat and Feed Die features a free floating bullet seater to insure maximum accuracy.
Includes: Sizer/Decapping Die, Powder Through Expanding Die, Bullet Seat and Feed Die, Shellholder, Powder Dipper and Load Data.
LEE – 7.5 x 55 SWISS 3 DIE SET w/FACTORY CRIMP w/Dipper & #R3 S/H
Product Information
Lee PaceSetter Dies now include the exclusive Lee Factory Crimp Die to produce factory-like ammunition with improved utility and accuracy. The die set also includes a conventional bullet seater and roll crimper. You can choose the type of crimp you desire. They also include a shell holder, powder dipper, load data and storage box.
LEE – 7.62MMx54R 3 DIE SET w/ FACTORY CRIMP, S/H #16
Product Information
Each Lee Pacesetter 3-Die Set includes the exclusive Lee Factory Crimp Die, Full Length Sizer Die and Bullet Seater Die. Each set is made from steel and includes the appropriate Shellholder, Powder Measure, load data, plastic storage box and a two year warranty. Adjustable crimp from slight taper to full roll. Includes 308 diameter expander button, 311 diameter expander button available from Lee.
Technical Information:
Note from the Manufacturer:
•Lee Precision includes the expander appropriate for a .308 diameter bullet. Nearly everyone that reloads the 7.62×54 /7.62×53 uses the .308 diameter bullet. The availability and selection of .308 bullets are far greater than .311. In military issue ammo they used a .309 to .311 diameter bullet. The smaller expander is included as standard issue as it is usable for .308 as well as .310 diameter bullets if the larger expander was installed it would not be usable with smaller .308 diameter bullets. The limited amount of load data that is available usually is worked up using .308 diameter bullets.
