LEE – 45 ACP CARBIDE DLX 4 DIE SET, S/H #2
$96.00
Product Information
By separating the seating and crimping operation, you will benefit by a greatly simplified adjustment. More importantly, the Carbide Factory Crimp Die post sizes your case assuring you that any round that passes through the die will chamber properly in your gun.
The Lee Deluxe Handgun 4-Die Set is a great set of reloading dies for anyone looking for a set of dies that will reload accurate ammunition every time the dies used. Each Deluxe 4-Die Set comes packaged with a carbide full length sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder), a bullet seating die, and Lee’s exclusivecarbide Factory Crimp Die. The carbide Factory Crimp Die is that final step to make sure each round with positively chamber freely with factory-like dependability. The Deluxe 4-Die set also comes packaged with the appropriate shellholder, powder dipper, load data sheet and flat 4-die plastic container. Carbide dies do not require the cases to be lubricated prior to use like non-carbide dies.
Technical Information:
Material: Steel
Die Types Included
•Carbide Full Length Sizing Die with Decapping Unit
•Powder Through Expanding Die
•Bullet Seating Die
•Carbide Factory Crimp Die
Accessories:
- Plastic Storage Case
- Appropriate Shellholder
- Powder Dipper
- Load Data Sheet
Notes:
•Carbide dies do not require the cases to be lubricated prior to use like non-carbide dies.
1 in stock
Product Information
By separating the seating and crimping operation, you will benefit by a greatly simplified adjustment. More importantly, the Carbide Factory Crimp Die post sizes your case assuring you that any round that passes through the die will chamber properly in your gun.
The Lee Deluxe Handgun 4-Die Set is a great set of reloading dies for anyone looking for a set of dies that will reload accurate ammunition every time the dies used. Each Deluxe 4-Die Set comes packaged with a carbide full length sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder), a bullet seating die, and Lee’s exclusivecarbide Factory Crimp Die. The carbide Factory Crimp Die is that final step to make sure each round with positively chamber freely with factory-like dependability. The Deluxe 4-Die set also comes packaged with the appropriate shellholder, powder dipper, load data sheet and flat 4-die plastic container. Carbide dies do not require the cases to be lubricated prior to use like non-carbide dies.
Technical Information:
Material: Steel
Die Types Included
•Carbide Full Length Sizing Die with Decapping Unit
•Powder Through Expanding Die
•Bullet Seating Die
•Carbide Factory Crimp Die
Accessories:
- Plastic Storage Case
- Appropriate Shellholder
- Powder Dipper
- Load Data Sheet
Notes:
•Carbide dies do not require the cases to be lubricated prior to use like non-carbide dies.
| Weight | 1.6 lbs |
|---|---|
| Brand |
LEE |
Only logged in customers who have purchased this product may leave a review.
Related products
Hornady – Cowboy 3-Die Set 38 Special, 357 Magnum, 357 Maxim
LEE – 40 S&W/10MM CARBIDE 3 DIE SET w/Dipper & #R19 S/H
Product Information
We use a solid carbide insert, ground to a special contour that does not leave a belt mark on the case like other carbide dies. With a carbide sizer, no case lube is needed. Sizer also features an unbreakable decapper and built-in stuck case remover. The Powder Through Expanding Die permits charging the case while expanding the case mouth. The Bullet Seat and Feed Die features a free floating bullet seater to insure maximum accuracy. Includes: Sizer/Decapping Die, Powder Through Expanding Die, Bullet Seat and Feed Die, Shellholder, Powder Dipper and Load Data.
LEE – 44 SPL/MAG CARBIDE DLX 4 DIE SET w/Dipper & #R11 S/H
Product Information
By separating the seating and crimping operation, you will benefit by a greatly simplified adjustment. More importantly, the Carbide Factory Crimp Die post sizes your case assuring you that any round that passes through the die will chamber properly in your gun. Includes: Sizer/Decapping Die, Powder Through Expanding Die, Bullet Seat and Feed Die, Factory Crimp Die, Shellholder, Powder Dipper and Load Data.
LEE – Undersized Carbide Sizing Die 40 S&W
Product Information
Lee U Carbide Small Base Sizing Dies are great for reloaders looking for ultimate feeding reliability in their handgun. These dies undersize brass between .002" and .003" smaller than other Lee Carbide Sizing dies. Ammunition with undersized brass cases will chamber each and every time it is loaded out of a magazine giving reliable chambering each time a round is stripped out of the magazine or loaded into a cylinder. Competition shooters rely on having ammunition that will feed and chamber each round of ammunition as it is stripped out of the magazine. One of the other benefits reloaders have reported when using Lee U dies is increased consistency and accuracy in loaded rounds because these dies help increase and provide more consistent neck tension on loaded bullets. The solid carbide insert inside of these dies is ground to a special contour that does not leave a belt mark on the case. These carbide dies do not require lubricant while resizing, though a little case lube will make the sizing process easier. Shellholder sold separately. Technical Information: Material: Steel Die Type: U Carbide Small Base Sizing Die Accessories: Plastic Storage Container Notes: •Carbide sizing dies do not require case lube •Undersized dies size brass between .002" and .003" below SAAMI specifications, so ammunition will feed in chamber in tight chambers •Undersized dies work great for bringing back case tension to hold bullets on cases that may be thinner walled
LEE – Undersized Carbide Sizing Die 9mm Luger
Product Information
Lee U Carbide Small Base Sizing Dies are great for reloaders looking for ultimate feeding reliability in their handgun. These dies undersize brass between .002″ and .003″ smaller than other Lee Carbide Sizing dies. Ammunition with undersized brass cases will chamber each and every time it is loaded out of a magazine giving reliable chambering each time a round is stripped out of the magazine or loaded into a cylinder. Competition shooters rely on having ammunition that will feed and chamber each round of ammunition as it is stripped out of the magazine. One of the other benefits reloaders have reported when using Lee U dies is increased consistency and accuracy in loaded rounds because these dies help increase and provide more consistent neck tension on loaded bullets. The solid carbide insert inside of these dies is ground to a special contour that does not leave a belt mark on the case. These carbide dies do not require lubricant while resizing, though a little case lube will make the sizing process easier. Shellholder sold separately.
Technical Information:
Material: Steel
Die Type: U Carbide Small Base Sizing Die
Accessories: Plastic Storage Container
Notes:
•Carbide sizing dies do not require case lube
•Undersized dies size brass between .002″ and .003″ below SAAMI specifications, so ammunition will feed in chamber in tight chambers
•Undersized dies work great for bringing back case tension to hold bullets on cases that may be thinner walled
Lee 30 Mauser (7.63×25mm) Steel 3-Die Set
Product Information
The Lee Steel 3-Die Set is a great set of reloading dies for any reloader looking for a set of dies that will produce accurate ammunition for many years. Lee dies are made to exacting tolerances helping to create accurate ammunition every time they are used. Each Steel 3-Die Set comes packaged with a steel sizing die with decapping unit, powder through expanding die (used for expanding and belling the case mouth while charging the case with powder) and bullet seating die. Each die set comes packaged with the appropriate shellholder, powder dipper, load data sheet and plastic storage container. Notes: Adjustable crimp from slight taper to full roll
LEE 380 ACP CARBIDE 3 DIE SET, S/H #4
Product Information
We use a solid carbide insert, ground to a special contour that does not leave a belt mark on the case like other carbide dies. With a carbide sizer, no case lube is needed. Sizer also features an unbreakable decapper and built-in stuck case remover. The Powder Through Expanding Die permits charging the case while expanding the case mouth. The Bullet Seat and Feed Die features a free floating bullet seater to insure maximum accuracy. Includes: Sizer/Decapping Die, Powder Through Expanding Die, Bullet Seat and Feed Die, Shellholder, Powder Dipper and Load Data.
Reviews
There are no reviews yet.