HORNADY 6.5MM (.264) NECK SIZER DIE
$72.50
1 in stock
Related products
Hornady – New Dimension 2-Die Set 30-06 Springfield
Product Information
The Hornady Custom Grade New Dimension 2-Die Set is a great die set for the avid reloader. This die set includes a Custom Grade New Dimension (CGND) Full Length Sizer Die and a CGND Seating Die. The Full Length Sizer Die features a Zip Spindle, with a series of light threads cut on the spindle and spindle collet. This eliminates spindle slippage, and makes tightening the spindle lock a breeze when making adjustments. The floating bullet alignment sleeve and stem in the CGND Seating Die improve bullet seating and accuracy by pre-aligning the bullet and case before seating. The seating die also applies a roll crimp to secure the bullet in the case. The CGND die set comes packaged in a plastic storage box, and includes two Sure-Loc rings. Shellholder is sold separately.
Hornady – New Dimension 2-Die Set 303 British
The Hornady Custom Grade New Dimension 2-Die Set is a great die set for the avid reloader. This die set includes a Custom Grade New Dimension (CGND) Full Length Sizer Die and a CGND Seating Die. The Full Length Sizer Die features a Zip Spindle, with a series of light threads cut on the spindle and spindle collet. This eliminates spindle slippage, and makes tightening the spindle lock a breeze when making adjustments. The floating bullet alignment sleeve and stem in the CGND Seating Die improve bullet seating and accuracy by pre-aligning the bullet and case before seating. The seating die also applies a roll crimp to secure the bullet in the case. The CGND die set comes packaged in a plastic storage box, and includes two Sure-Loc rings. Shellholder is sold separately.
LEE – 30M1 CARBINE CARBIDE 3 DIE SET w/Dipper & #R7 S/H
We use a solid carbide insert, ground to a special contour that does not leave a belt mark on the case like other carbide dies. With a carbide sizer, no case lube is needed. Sizer also features an unbreakable decapper and built-in stuck case remover. The Powder Through Expanding Die permits charging the case while expanding the case mouth. The Bullet Seat and Feed Die features a free floating bullet seater to insure maximum accuracy.
Includes: Sizer/Decapping Die, Powder Through Expanding Die, Bullet Seat and Feed Die, Shellholder, Powder Dipper and Load Data.
LEE – 7.62MMx54R 3 DIE SET w/ FACTORY CRIMP, S/H #16
Product Information
Each Lee Pacesetter 3-Die Set includes the exclusive Lee Factory Crimp Die, Full Length Sizer Die and Bullet Seater Die. Each set is made from steel and includes the appropriate Shellholder, Powder Measure, load data, plastic storage box and a two year warranty. Adjustable crimp from slight taper to full roll. Includes 308 diameter expander button, 311 diameter expander button available from Lee.
Technical Information:
Note from the Manufacturer:
•Lee Precision includes the expander appropriate for a .308 diameter bullet. Nearly everyone that reloads the 7.62×54 /7.62×53 uses the .308 diameter bullet. The availability and selection of .308 bullets are far greater than .311. In military issue ammo they used a .309 to .311 diameter bullet. The smaller expander is included as standard issue as it is usable for .308 as well as .310 diameter bullets if the larger expander was installed it would not be usable with smaller .308 diameter bullets. The limited amount of load data that is available usually is worked up using .308 diameter bullets.
LEE – 8x57mm MAUSER (8mm Mauser) 3-DIE SET w/Dipper & #R2 S/H
Product Information
Each Lee Precision has been manufacturing high quality, affordable reloading equipment since 1958. Each Pacesetter 3-Die Set includes the exclusive Lee Factory Crimp Die, Full Length Sizer Die and Bullet Seater Die. Each set is made from steel and includes the appropriate Shellholder, Powder Measure, load data, plastic storage box and a two year warranty. Adjustable crimp from slight taper to full roll.
Technical Information:
Dies Included:
•Full Length Sizing Die
•Bullet Seating Die
•Factory Crimp Die
Die Size: 7/8″-14 threads
Shellholder Included: Yes
Notes: 2 Year Warranty
Accessories Included:
•Powder Dipper
•Load Data
•Plastic Storage Box
LEE 7MM-08 REMINGTON 3 DIE SET w/FACTORY CRIMP, S/H #2
Product Information
Lee PaceSetter Dies now include the exclusive Lee Factory Crimp Die to produce factory-like ammunition with improved utility and accuracy. The die set also includes a conventional bullet seater and roll crimper. You can choose the type of crimp you desire. They also include a shell holder, powder dipper, load data and storage box.
