New
HAWKE Carbon Fiber Pro Bipod 8-11″ – Notched
$189.99
-
- Ultra lightweight carbon fiber legs
- Tension sprung notched legs with button locks
- Legs can be positioned forward or backward – 180º degree range of motion
- Quick release picatinny rail mount
- Swivel adjustment horizontally left and right to track moving targets
- 40º of tilt adjustment left and right with resettable locking lever
- Supplied with anti-slip rubber feet and spiked feet
- 12oz / 340g
MountPicatinny – Quick ReleaseHeight8–11″20–28cmWeight12oz340gSpring TypeTensionLeg TypeNotchedLeg Increments0.6″1.5cmMounted Height7.7–10.2″19.5–26cmMounted Height with Spikes8.5–11.2″21.5–28.5cmFootprint7.1–9.6″18–24.5cmFootprint with Spikes8.7–11.2″22–28.5cm
1 in stock
Description
-
- Ultra lightweight carbon fiber legs
- Tension sprung notched legs with button locks
- Legs can be positioned forward or backward – 180º degree range of motion
- Quick release picatinny rail mount
- Swivel adjustment horizontally left and right to track moving targets
- 40º of tilt adjustment left and right with resettable locking lever
- Supplied with anti-slip rubber feet and spiked feet
- 12oz / 340g
MountPicatinny – Quick ReleaseHeight8–11″20–28cmWeight12oz340gSpring TypeTensionLeg TypeNotchedLeg Increments0.6″1.5cmMounted Height7.7–10.2″19.5–26cmMounted Height with Spikes8.5–11.2″21.5–28.5cmFootprint7.1–9.6″18–24.5cmFootprint with Spikes8.7–11.2″22–28.5cm
Additional information
| Weight | 2 lbs |
|---|
Shipping & Delivery
Related products
MDT – ACC Elite Chassis System – Remington 700 Short Action – Black RH
BUILT TO WIN
All THAT'S LEFT IS TO TRAIN
The ACC Elite is built for winning matches. Used by thousands of competitors worldwide, it’s the #1 chassis in the PRS, backed by countless podium finishes. A full-length ARCA forend, tunable weight system, and fully adjustable ergonomics give competitors the balance, stability, and control needed to run stages efficiently and make consistent hits under pressure.
MDT – ACC Elite Chassis System – Tikka T3/T3x SA – Black RH
BUILT TO WIN
All THAT'S LEFT IS TO TRAIN
The ACC Elite is built for winning matches. Used by thousands of competitors worldwide, it’s the #1 chassis in the PRS, backed by countless podium finishes. A full-length ARCA forend, tunable weight system, and fully adjustable ergonomics give competitors the balance, stability, and control needed to run stages efficiently and make consistent hits under pressure.
Vortex Hunter Rings – 1 inch, High
Vortex Hunter Rings
Made from aircraft-grade 6061-T6 aluminum, Vortex Hunter Rings are lightweight without sacrificing durability and strength. Each ring clamps down on the scope with the standard 2-screw setup and mounts to either Picatinny or Weaver style rails.
These rings position the centre of the riflescope tube at a height of 1.22 inches (31mm) from the base. Comes with a pair of rings.
Recommended Torque Specs:
- Base Clamp Thumb Screws - 25-30 in/lbs
- Ring Screws - 15 in/lbs
Vortex Hunter Rings – 30mm, High
Vortex Hunter Rings
Made from aircraft-grade 6061-T6 aluminum, Vortex Hunter Rings are lightweight without sacrificing durability and strength. Each ring clamps down on the scope with the standard 2-screw setup and mounts to either Picatinny or Weaver style rails.
These rings position the centre of the riflescope tube at a height of 1.22 inches (31mm) from the base. Comes with a pair of rings.
Recommended Torque Specs:
- Base Clamp Thumb Screws - 25-30 in/lbs
- Ring Screws - 15 in/lbs
Vortex Hunter Rings – 30mm, Low
Vortex Hunter Rings
Made from aircraft-grade 6061-T6 aluminum, Vortex Hunter Rings are lightweight without sacrificing durability and strength. Each ring clamps down on the scope with the standard 2-screw setup and mounts to either Picatinny or Weaver style rails.
These rings position the centre of the riflescope tube at a height of 0.75 inches (19mm) from the base. Comes with a pair of rings.
Recommended Torque Specs:
- Base Clamp Thumb Screws - 25-30 in/lbs
- Ring Screws - 15 in/lbs
Vortex Pro 1-Inch Rings – Low 0.75″/19.0mm
Vortex Pro 34mm Rings – Medium 1.10″/27.94mm
| Center Scope Height | 1.10 inches (27.9 mm) |
|---|---|
| Weight (per ring) | 58.12 grams (2.05 oz) |
| Mount Compatibility | Picatinny and Weaver |
- 2 Pro Riflescope Rings
- 2 Additional T-25 Torx® Screws
- T-25 Torx® Wrench
| Recommended Torque Specs | |
| Base Clamp Screws | Ring Screws |
| 30 in/lbs | 18 in/lbs |
- Type 2 Low-Glare Matte Black Anodized
- Laser Engraved Torque Specifications
- Integrated Recoil Lug
- 6061 Aluminum
- Made in the USA
