HotNew
Fixit Sticks Scope Jack - Image 1
Fixit Sticks Scope Jack - Image 2
Fixit Sticks Scope Jack - Image 3
Click to enlarge
Fixit Sticks Scope Jack
Fixit Sticks Scope Jack - Image 2
Fixit Sticks Scope Jack - Image 3
Fixit Sticks 15 lb Miniature Torque Limiter
Fixit Sticks 15 lb Miniature Torque Limiter $59.99
Back to products
RCBS - RCBS BULLET PULLER POWER PULL II w/3 CHUCKS
RCBS - RCBS BULLET PULLER POWER PULL II w/3 CHUCKS $46.25

Fixit Sticks Scope Jack

$64.99

Place shots with increased accuracy by mounting your optics using the Fix It Sticks Bubble Level Set. Our turret level is magnetic for easy on/off, and our NATO/Pic Rail Level doubles as an anti-cant device for shooting. Both machined aluminum levels feature premium UK-sourced bubble vials for definitive precision.

 

Kit includes:

  • Magnetic level
  • NATO/Pic rail level/anti-cant device
  • Protective foam carrier with pouch

1 in stock

Add to Wishlist
Add to wishlist
SKU: FIS-SJACK Categories: ,
Description
Description

 

Use the Fix It Sticks Scope Jack to quickly and easily level your scope to your NATO or Pic rail.

Using the level is easy: simply mount the Scope Jack to your rifle’s NATO or Pic rail, under your scope. Turn the Scope Jack drive handle (the Scope Jack works with any 1/4″ driver) until the lifting arm engages with the flat section of the scope under its turrets. Once the scope is level, maintain pressure to keep scope level while tightening your ring screws.

In cases of minimal clearance, it may be necessary to remove the thumb screw and clamp, then slide the Scope Jack onto the rail from the side and reassemble.

Requirements:

• Needs a minimum of 1/4″ clearance between rail and scope bottom. 

• Works on any scope with a flat section under the turrets.

• The NATO/Pic rail must be accessible under the optic.

• Will not work with one piece mounts.


INSTRUCTION MANUAL

Additional information
Weight .5 lbs
Shipping & Delivery

Related products

HotNew

Fixit Sticks 15 lb Miniature Torque Limiter

,
$59.99
Fix It Sticks' Small Torque Limiters prevent over-tightening of fasteners. When you reach the correct in-lb of torque, you'll hear an audible "click" and the limiter will spin to prevent further torque from being applied. Each limiter accepts any standard 1/4" bit, fits into any standard 1/4" driver, including Fix It Sticks Tools or our T-Way Wrench, and tightens precisely (+/- 6% accuracy). Each retains its accuracy for up to 20,000 cycles.
Add to wishlist
Add to cart
Quick view
HotNew

Fixit Sticks 15-65 Inch lb All-In-OneTorque Driver

,
$89.99
Use Fix It Sticks' All-in-One Torque Driver to tighten down scope rings, mounts, actions screws, etc. while in the field, at the range, or at home, with +/- 10% accuracy. You'll never over or under tighten critical components again. It's easy to use, too. Turn the drive handle until the hash mark lines up with the torque value you need (from 15 - 65 in-lb) and you're ready to get to work. The All-in-One Torque Driver accepts any standard 1/4" bit, fits into any standard 1/4" driver and integrates perfectly with Fix It Sticks tools and our T-Way Driver (not included). Torque Bit ONLY, no driver included
Add to wishlist
Add to cart
Quick view
HotNew

Fixit Sticks 25 lb Miniature Torque Limiter

,
$59.99
Fix It Sticks' Small Torque Limiters prevent over-tightening of fasteners. When you reach the correct in-lb of torque, you'll hear an audible "click" and the limiter will spin to prevent further torque from being applied. Each limiter accepts any standard 1/4" bit, fits into any standard 1/4" driver, including Fix It Sticks Tools or our T-Way Wrench, and tightens precisely (+/- 6% accuracy). Each retains its accuracy for up to 20,000 cycles.
Add to wishlist
Add to cart
Quick view
HotNew

Fixit Sticks 35 lb Torque Limiter

,
$59.99
Fix It Sticks' Small Torque Limiters prevent over-tightening of fasteners. When you reach the correct in-lb of torque, you'll hear an audible "click" and the limiter will spin to prevent further torque from being applied. Each limiter accepts any standard 1/4" bit, fits into any standard 1/4" driver, including Fix It Sticks Tools or our T-Way Wrench, and tightens precisely (+/- 6% accuracy). Each retains its accuracy for up to 20,000 cycles.
Add to wishlist
Add to cart
Quick view
HotNew

Fixit Sticks 45 lb Miniature Torque Limiter

,
$59.99
Fix It Sticks' Small Torque Limiters prevent over-tightening of fasteners. When you reach the correct in-lb of torque, you'll hear an audible "click" and the limiter will spin to prevent further torque from being applied. Each limiter accepts any standard 1/4" bit, fits into any standard 1/4" driver, including Fix It Sticks Tools or our T-Way Wrench, and tightens precisely (+/- 6% accuracy). Each retains its accuracy for up to 20,000 cycles.
Add to wishlist
Add to cart
Quick view
HotNew

Fixit Sticks 6-25 Inch lb Mini All-In-One Torque Driver

,
$79.99
Use Fix It Sticks' All-in-One Torque Driver to tighten down scope rings, mounts, actions screws, etc. while in the field, at the range, or at home, with +/- 10% accuracy. You'll never over or under tighten critical components again. It's easy to use, too. Turn the drive handle until the hash mark lines up with the torque value you need (from 15 - 65 in-lb) and you're ready to get to work. The All-in-One Torque Driver accepts any standard 1/4" bit, fits into any standard 1/4" driver and integrates perfectly with Fix It Sticks tools and our T-Way Driver (not included). Torque Bit ONLY, no driver included
Add to wishlist
Add to cart
Quick view
HotNew

Fixit Sticks Rifle and Optics Toolkit with All-in-One Torque Driver

,
$169.99
Carry Fix It Sticks' Rifle and Optics Toolkit with All-in-One Torque Driver and you can tighten down scope rings, mounts, actions screws, and more, whether you're in the field, at the range, or at home. Using either the All-in-One Torque Driver you'll never over or under tighten critical components again. Simply turn the drive handle until the hash mark lines up with the torque value you need (from 15 - 65 in-lbs) and you're ready to get to work. The Rifle and Optics Toolkit is lightweight and compact, making it ideal for competition, hunting and more.
This Rifle and Optics Toolkit includes: • All-in-One Torque Driver (15-65 in-lbs) • T-Way T-Handle Wrench • 15 different bits: T10, T15, T20, T25, [Hex 3/32", 5/64", 1/8", 5/32", 3/16", 2.5mm, 3mm, 4mm, 5mm], P1, Slotted 5mm • 1/2" socket and 1/4" bit adapter set • Zippered case with molded accessory holder
Add to wishlist
Add to cart
Quick view

LYMAN BRASS TAPPER HAMMER

$38.00
Product Information
For gunsmithing and other delicate jobs, this hammer has three interchangeable heads including nylon, brass and steel. For delicate tapping, a knurled brass drift pin stores inside the handle.
Add to wishlist
Add to cart
Quick view