CLAYBUSTER WAD SW250-12ga 1-1/4 to 1-3/8 SLUG WAD 250/Bag
$32.00
Product Information:
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. The Claybuster Slug Wad is a beefy design, which is made to handle the rigors of slugs.
Wads are essential for shotshell reloading. They fill extra space in the hull to make sure there is no room for the shot and powder to move around. They also act as a barrier between the powder and shot charges to ensure proper powder ignition, protect the shot from hot gasses and seal gasses behind the shot so that it can be propelled down the barrel. The wad also acts as a dual barrier to protect the barrel from becoming damaged by hard shot and to protect soft shot from becoming deformed by contact with hard barrel steel.
4 in stock
Product Information:
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. The Claybuster Slug Wad is a beefy design, which is made to handle the rigors of slugs.
Wads are essential for shotshell reloading. They fill extra space in the hull to make sure there is no room for the shot and powder to move around. They also act as a barrier between the powder and shot charges to ensure proper powder ignition, protect the shot from hot gasses and seal gasses behind the shot so that it can be propelled down the barrel. The wad also acts as a dual barrier to protect the barrel from becoming damaged by hard shot and to protect soft shot from becoming deformed by contact with hard barrel steel.
| Weight | 1.5 lbs |
|---|
Related products
BPI CORK FILLER/CUSHION WAD 12ga .125″ 250/BAG
Product Information
Cork wads are placed under the shot bringing the load up to perfect crimping height. Cork wads are light, dense and very flexible – great for smaller pellet sizes. Cork wads can be stacked to accomodate any height requirements. Use 12 gauge cork wads inside 10 gauge shotcups and 20 gauge cork wads inside 12 gauge shotcups. Cork wads can be used in place of other filller wads but are not to be used directly on the powder.
Claybuster – 12ga 7/8 oz Wads CB0178-12 (Replaces WAA12L) 500/Bag
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. The CB0178-12 wad was designed for use in 7/8 oz to 1 oz trap, skeet, or sporting clays loads.
Technical Information:
•Replaces the Winchester WAA12L
•Optimal Load: 7/8 oz
•Intended as an economical wad replacement for target and wing shooters
•Wads are made with 100% prime resin for consistency
These are the best wads to use for reloading Cast Lee Key 1.0 oz Slugs.
They fit perfectly & the slugs drop right in.
Claybuster – Shotshell Wads 410 Bore CB5050-410HS (Replaces WAA410HS) 1/2 oz 500/Bag
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell.
Technical Information:
•Replaces the Winchester WAA410HS
•Optimal Load: 1/2 oz
•Intended as an economical wad replacement for target and wing shooters
•Wads are made with 100% prime resin for consistency
CLAYBUSTER – Wads 12 Gauge CB1118-12 (Replaces WAA12) 5000/Case
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. This wad was designed for 1 to 1-5/8 oz trap, skeet, sporting clays, or hunting loads and performs best in tapered hulls.
Technical Information:
•Replaces the Winchester WAA12
•Optimal Load: 1-1/8 oz
•Intended as an economical wad replacement for target and wing shooters
•500/bag
•Wads are made with 100% prime resin for consistency
CLAYBUSTER WAD 28ga 3/4oz CB5034 (WAA28-HS) 500/Bag
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. For use in 3/4 oz. Winchester HS, Remington, or Federal hulls. Optimum load is 3/4 oz. 500 pieces per bag
CLAYBUSTER WAD CB2100 12ga 1oz (12S0) 500/Bag
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. For use in 7/8 to 1-1/8 oz. trap, skeet, sporting clays or hunting loads. Performs best in straight wall cases such as Federal paper or plastic and Fiocchi.
Technical Information
Optimum load is 1 oz.
Wads are made with 100% prime resin for consistency
5000 Pcs/Case
