CamPro – 40cal/10mm (.401) 200gr Trunc Cone FP BULLET 500/Bag
$79.00
Product Information
A premium plated 40cal/10mm 200gr Trunc Cone Flat Point bullet that will stay together and handle the hot 40 S&W/10mm you love to abuse your hands with. Also, very accurate and great for IPSC/USPSA standard loads.
With an extra thick plating making it suitable for everything from a plinking load to a full on 40 S&W major load out of the most modern open gun (or carbine).
These bullets have a plating that is thicker than Berry’s bullet plating. Approx .08” in thick.
These bullets are Canadian Made!
These bullets will work in a Carbine & hold together.
This is NOT LOADED Ammunition.
8 in stock
Description
Product Information
A premium plated 40cal/10mm 200gr Trunc Cone Flat Point bullet that will stay together and handle the hot 40 S&W/10mm you love to abuse your hands with. Also, very accurate and great for IPSC/USPSA standard loads.
With an extra thick plating making it suitable for everything from a plinking load to a full on 40 S&W major load out of the most modern open gun (or carbine).
These bullets have a plating that is thicker than Berry’s bullet plating. Approx .08” in thick.
These bullets are Canadian Made!
These bullets will work in a Carbine & hold together.
This is NOT LOADED Ammunition.
| Campro 40 cal (.401) 200gr Trunc Cone FP Load Data | |||||
| Inch | Millimeter | ||||
| C.O.L: | 1.130 | 28,70 | |||
| Taper Crimp: | 0.415 | 10,54 | |||
| Primer: | Small Pistol | ||||
| Grains | Grams | ||||
| Min | Max | Min | Max | ||
| Titegroup | 3.4 | 3.8 | 0,22 | 0,25 | |
| HP-38 | 3.9 | 4.7 | 0,25 | 0,30 | |
| W231 | 3.9 | 4.7 | 0,25 | 0,30 | |
| HS-6 | 5.5 | 6.3 | 0,36 | 0,41 | |
| 700X | 3.5 | 3.9 | 0,23 | 0,25 | |
| Unique | 4.8 | 5.5 | 0,31 | 0,36 | |
| Green Dot | 4.5 | 4.9 | 0,29 | 0,32 | |
| N340 | 4.6 | 4.9 | 0,30 | 0,32 | |
| N350 | 5.2 | 5.5 | 0,34 | 0,36 | |
| Never exceed the maximum load. Ballistic data varies depending on many factors (types of firearm, components used, assembly and reloading techniques). Because we have no control over components and equipment to be used, this information must be regarded as a guideline only with no express or no implied responsibility and no warranty as to results obtained through its use. | |||||
| View Load Data PDF from Campro Website | |||||
Additional information
| Weight | 15 lbs |
|---|
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Shipping & Delivery
Related products
CamPro – 40cal/10mm (.401) 155gr Trunc Cone FP BULLET 1000/Bag
Product Information
A premium plated 40cal/10mm 155gr bullet with an extra thick plating making it suitable for everything from a plinking load to a full on .40cal/10mm major load out of the most modern open gun (or carbine).
These bullets have a plating that is thicker than Berry’s bullet plating. Approx .08” in thick.
These bullets are Canadian Made!
These bullets will work in a Carbine & hold together.
This is NOT LOADED Ammunition.
CamPro – 40cal/10mm (.401) 180gr Trunc Cone FP BULLET 100/Bag
Product Information
A premium plated 40cal/10mm 180gr Truncated Cone FP bullet that will stay together and handle the hot 40 S&W you love to abuse your hands with. Also, very accurate and great for IPSC/USPSA standard loads.
With an extra thick plating making it suitable for everything from a plinking load to a full on 40 S&W major load out of the most modern open gun (or carbine).
With an extra thick plating making it suitable for everything from a plinking load to a full on 40 S&W major load out of the most modern open gun (or carbine).
These bullets have a plating that is thicker than Berry’s bullet plating. Approx .08” in thick.
These bullets are Canadian Made!
These bullets will work in a Carbine & hold together.
This is NOT LOADED Ammunition.
CamPro – 40cal/10mm (.401) 180gr Trunc Cone FP BULLET 1000/Bag
Product Information
A premium plated 40cal/10mm 180gr Truncated Cone Flat Point bullet that will stay together and handle the hot 40 S&W you love to abuse your hands with. Also, very accurate and great for IPSC/USPSA standard loads.
With an extra thick plating making it suitable for everything from a plinking load to a full on 40 S&W major load out of the most modern open gun (or carbine).
With an extra thick plating making it suitable for everything from a plinking load to a full on 40 S&W major load out of the most modern open gun (or carbine).
These bullets have a plating that is thicker than Berry’s bullet plating. Approx .08” in thick.
These bullets are Canadian Made!
These bullets will work in a Carbine & hold together.
This is NOT LOADED Ammunition.
CamPro – 40cal/10mm (.401) 180gr Trunc Cone HP BULLET 100/Bag
Product Information
A premium plated 40cal/10mm 180gr Hollow Point bullet that will stay together and handle the hot 40 S&W you love to abuse your hands with. Also, very accurate and great for IPSC/USPSA standard loads.
With an extra thick plating making it suitable for everything from a plinking load to a full on 40 S&W major load out of the most modern open gun (or carbine).
These bullets have a plating that is thicker than Berry’s bullet plating. Approx .08” in thick.
These bullets are Canadian Made!
These bullets will work in a Carbine & hold together.
All CamPro bullets can be loaded to Jacketed Load Specs.
This is NOT LOADED Ammunition.
CamPro – 40cal/10mm (.401) 200gr Trunc Cone FP BULLET 100/Bag
Product Information
A premium plated 40cal/10mm 200gr Truncated Cone Flat Point bullet that will stay together and handle the hot 40cal/10mm you love to abuse your hands with. Also, very accurate and great for IPSC/USPSA standard loads.
With an extra thick plating making it suitable for everything from a plinking load to a full on 40 cal load out of the most modern open gun (or carbine).
These bullets have a plating that is thicker than Berry’s bullet plating. Approx .08” in thick.
These bullets are Canadian Made!
These bullets will work in a Carbine & hold together.
All CamPro bullets can be loaded to Jacketed Load Specs.
This is NOT LOADED Ammunition.
Penner Precision 40/10mm (.401) 165gr FP 100 /bag
40/10mm (.401) 165gr FP 100 /bag
Penner Precision is a Canadian Veteran owned company manufacturing Hi-Tek coated hard cast projectiles. Hi-Tek Supercoat was developed specifically to provide reloaders with a cast bullet that didn't smoke and gum up reloading dies like traditional wax lubed bullets. Properly applied, the coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
These bullets are cast lead coated with Hi-Tek Supercoat, which is a polymer. The alloy used for these bullets are 92% lead, 6% antimony and 2% tin, which produces bullets around 16HB hardness.
What does this mean for the reloader and shooter? Cleaner reloading dies, cleaner hands and cleaner guns, all from a highly consistent and accurate projectile manufactured right here in Alberta!Â
Penner Precision 40/10mm (.401) 165gr FP 1000 /bag
40/10mm (.401) 165gr FP 1000 /bag
Penner Precision is a Canadian Veteran owned company manufacturing Hi-Tek coated hard cast projectiles. Hi-Tek Supercoat was developed specifically to provide reloaders with a cast bullet that didn't smoke and gum up reloading dies like traditional wax lubed bullets. Properly applied, the coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
These bullets are cast lead coated with Hi-Tek Supercoat, which is a polymer. The alloy used for these bullets are 92% lead, 6% antimony and 2% tin, which produces bullets around 16HB hardness.
What does this mean for the reloader and shooter? Cleaner reloading dies, cleaner hands and cleaner guns, all from a highly consistent and accurate projectile manufactured right here in Alberta!Â
Penner Precision 40/10mm (.401) 180gr FP 100 /bag
40/10mm (.401) 180gr FP 100 /bag
Penner Precision is a Canadian Veteran owned company manufacturing Hi-Tek coated hard cast projectiles. Hi-Tek Supercoat was developed specifically to provide reloaders with a cast bullet that didn't smoke and gum up reloading dies like traditional wax lubed bullets. Properly applied, the coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
These bullets are cast lead coated with Hi-Tek Supercoat, which is a polymer. The alloy used for these bullets are 92% lead, 6% antimony and 2% tin, which produces bullets around 16HB hardness.
What does this mean for the reloader and shooter? Cleaner reloading dies, cleaner hands and cleaner guns, all from a highly consistent and accurate projectile manufactured right here in Alberta!Â
Reviews
There are no reviews yet.