CamPro – 38/357 Cal (.357) 158gr RSFP 1000/Bag
$153.00
Product Information
A premium plated 158gr .38/.357 bullet with an extra thick plating making it suitable for everything from a plinking load to a full on .357Mag major load out of the most modern open gun (or carbine).
These bullets have a plating that is thicker than Berry’s bullet plating. Approx .08” in thick.
These bullets are Canadian Made!
These bullets will work in a Carbine & hold together.
This is NOT LOADED Ammunition.
15 in stock
Description
Product Information
A premium plated 158gr .38/.357 bullet with an extra thick plating making it suitable for everything from a plinking load to a full on .357Mag major load out of the most modern open gun (or carbine).
These bullets have a plating that is thicker than Berry’s bullet plating. Approx .08” in thick.
These bullets are Canadian Made!
These bullets will work in a Carbine & hold together.
This is NOT LOADED Ammunition.
| Campro 38/357 Cal (.357) 158gr Round Shoulder Load Data | |||||
| Inch | Millimeter | ||||
| C.O.L: | 1.455 | 36,96 | |||
| Crimp: | Roll Crimp in the cannelure | ||||
| Primer: | Small Pistol | ||||
| Grains | Grams | ||||
| Min | Max | Min | Max | ||
| Clays | 3.0 | 3.1 | 0,19 | 0,20 | |
| Titegroup | 3.5 | 3.9 | 0,23 | 0,25 | |
| HP-38 | 3.8 | 4.3 | 0,25 | 0,28 | |
| W231 | 3.8 | 4.3 | 0,25 | 0,28 | |
| HS-6 | 5.6 | 6.2 | 0,36 | 0,40 | |
| 700-X | 3.2 | 3.7 | 0,21 | 0,24 | |
| N320 | 5.2 | 5.8 | 0,34 | 0,38 | |
| Bullseye | 3.4 | 3.8 | 0,22 | 0,25 | |
| Red Dot | 3.6 | 4.0 | 0,23 | 0,26 | |
| Unique | 5.0 | 5.4 | 0,32 | 0,35 | |
| Never exceed the maximum load. Ballistic data varies depending on many factors (types of firearm, components used, assembly and reloading techniques). Because we have no control over components and equipment to be used, this information must be regarded as a guideline only with no express or no implied responsibility and no warranty as to results obtained through its use. | |||||
| View Load Data PDF from Campro Website | |||||
Additional information
| Weight | 24 lbs |
|---|
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Shipping & Delivery
Related products
CamPro – 38/357 Cal (.357) 148gr Plated HBWC /1000 Box
Product Information
A premium plated 38/357 148gr HBWC bullet with an extra thick plating making it suitable for everything from a plinking load to a full on .357mag major load out of the most modern open gun (or carbine). These bullets have a plating that is thicker than Berry's bullet plating. Approx .08'' in thick. These bullets are Canadian Made! These bullets will work in a Carbine & hold together. This is NOT LOADED Ammunition.
CamPro – 38/357 Cal (.357) 158gr Trunc Cone 500/Bag
Product Information
A premium plated 158gr .38/.357 bullet with an extra thick plating making it suitable for everything from a plinking load to a full on .357Mag major load out of the most modern open gun (or carbine). These bullets have a plating that is thicker than Berry’s bullet plating. Approx .08” in thick. These bullets are Canadian Made! These bullets will work in a Carbine & hold together. This is NOT LOADED Ammunition. 500/Bag
Missouri Bullet Co – 38/357 (.358) 158gr LEAD Bullet SWC Action 500/Box
Product Information
Missouri’s bullets begin with a precision-swaged lead core to ensure uniformity. Missouri's’s bullets are as accurate as they are attractive. At the Missouri Bullet Company, we optimize bullets for your intended application. We don't take a “one size fits all” approach to manufacturing your bullets. Every box of our bullets displays the BHN, which we constantly sample and monitor. We take the time to create lead bullet alloy that is specialized for the bullet hardness that works best for you. It is a fact that we spend significantly more time alloying our lead than we do in making the bullets that come from it and we do this to provide you the right bullet for your application.Technical Notes:
.358 Diameter
.357 Magnum
158 Grain SWC
Brinell 18
For Magnum Velocities
MISSOURI BULLET COMPANY CAST 38c (.358) 158gr SWC MATCH 100/bag
Product Information
Missouri Bullet Company bullets are “Hardness-Optimized” for your intended application. Every box of bullets displays the BHN (Brinell Hardness Number), which is constantly sampled and monitored. Specially created alloys determine the bullet hardness which varies based on the intended caliber and application. Once you try bullets optimized for the velocity of the loads you shoot, you'll never buy another manufacturer's cast bullet! These are CAST LEAD bullets This is NOT LOADED ammunition.
Penner Precision 38/357 (.358) 115gr FP 100 /bag
38/357 (.358) 115gr Flat Point 100 per bag
Penner Precision is a Canadian Veteran owned company manufacturing Hi-Tek coated hard cast projectiles. Hi-Tek Supercoat was developed specifically to provide reloaders with a cast bullet that didn't smoke and gum up reloading dies like traditional wax lubed bullets. Properly applied, the coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
These bullets are cast lead coated with Hi-Tek Supercoat, which is a polymer. The alloy used for these bullets are 92% lead, 6% antimony and 2% tin, which produces bullets around 16HB hardness.
What does this mean for the reloader and shooter? Cleaner reloading dies, cleaner hands and cleaner guns, all from a highly consistent and accurate projectile manufactured right here in Alberta!
Penner Precision 38/357 (.358) 115gr RN 100 /bag
38/357 (.358) 115gr Round Nose 100 per bag
Penner Precision is a Canadian Veteran owned company manufacturing Hi-Tek coated hard cast projectiles. Hi-Tek Supercoat was developed specifically to provide reloaders with a cast bullet that didn't smoke and gum up reloading dies like traditional wax lubed bullets. Properly applied, the coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
These bullets are cast lead coated with Hi-Tek Supercoat, which is a polymer. The alloy used for these bullets are 92% lead, 6% antimony and 2% tin, which produces bullets around 16HB hardness.
What does this mean for the reloader and shooter? Cleaner reloading dies, cleaner hands and cleaner guns, all from a highly consistent and accurate projectile manufactured right here in Alberta!
Penner Precision 38/357 (.358) 147gr FP 1000 /bag
38/357 (.358) 147gr Flat Point 1000 per bag
Penner Precision is a Canadian Veteran owned company manufacturing Hi-Tek coated hard cast projectiles. Hi-Tek Supercoat was developed specifically to provide reloaders with a cast bullet that didn't smoke and gum up reloading dies like traditional wax lubed bullets. Properly applied, the coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
These bullets are cast lead coated with Hi-Tek Supercoat, which is a polymer. The alloy used for these bullets are 92% lead, 6% antimony and 2% tin, which produces bullets around 16HB hardness.
What does this mean for the reloader and shooter? Cleaner reloading dies, cleaner hands and cleaner guns, all from a highly consistent and accurate projectile manufactured right here in Alberta!
Reviews
There are no reviews yet.