BPI WAD 410ga TPS NON-TOX 3/8oz STEEL/ITX 200/BG
$39.50
Technical Notes
Product Type: Wad, Multi-Metal capability.
Size: .410 bore
Typical Loads: .410 non-toxic and high-capacity field loads.
Maximum Payload: 9/16 oz. ITX E-13 shot, 1/2 oz. ITX Original-10 shot, and 3/8 oz. steel shot.
5 in stock
Product Information
The world’s first and only non-toxic .410 wad
The TPS .410 is a full-length shot column wad designed specifically for the rigors of modern non-toxic shot, like steel, ITX, and Hevi-Shot. Finally, a wad that will allow you to load almost any type of non-toxic shot for your modern .410 shotgun. Designed for magnum field loads, the TPS .410 is the grand result of over two years of development.
Maximum capacities of smaller shot sizes are 9/16 oz. ITX Extreme-13 shot, 1/2 oz. ITX Original-10 shot, and 3/8 oz. steel shot. Capacity will vary greatly according to pellet size and these maximum weights will not necessarily yield the best loads; only testing results will render that decision.
- Length = 1.770″
- Depth = 1.630″
- Gas seal diam. = 0.402″
- Gas seal depth = 0.057″
- Wall thick. = 0.025″ to 0.050″
- Slits = Four slits
| Weight | 1 lbs |
|---|
Related products
Claybuster – 12ga 7/8 oz Wads CB0178-12 (Replaces WAA12L) 5000/Case
Product Information
This is for a full case of 5000 pieces.
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. The CB0178-12 wad was designed for use in 7/8 oz to 1 oz trap, skeet, or sporting clays loads.
Technical Information:
•Replaces the Winchester WAA12L
•Optimal Load: 7/8 oz
•Intended as an economical wad replacement for target and wing shooters
•Wads are made with 100% prime resin for consistency
These are the best wads to use for reloading Cast Lee Key 1.0 oz Slugs.
They fit perfectly & the slugs drop right in.
CLAYBUSTER – Wads 12 Gauge CB1118-12 (Replaces WAA12) 500/Bag
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. This wad was designed for 1 to 1-5/8 oz trap, skeet, sporting clays, or hunting loads and performs best in tapered hulls.
Technical Information:
•Replaces the Winchester WAA12
•Optimal Load: 1-1/8 oz
•Intended as an economical wad replacement for target and wing shooters
•500/bag
•Wads are made with 100% prime resin for consistency
Claybuster Shotshell Wads 12 Gauge CB2118-12 (Replaces 12S3) 1-1/8 oz 5000/Case
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. CB2118-12 is perfect for 1-1/8 to 1-1/4 oz target or hunting loads and works best in straight wall hulls such as Federal or Fiocchi.
5000/Case
CLAYBUSTER WAD 12ga 1-1/8 (FIG-8) CB8118 500/Bag
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. This wad was designed for use in 1-1/8 to 1-1/4 oz target or hunting loads in tapered hulls such as Remington or Winchester. 500/Bag
CLAYBUSTER WAD 16ga 1 to 1-1/8oz CB0100 (WAA16) 500/BAG
Product Information
Claybuster's Wad Line can satisfy nearly every target or wing shooting application for reloading. The wads are manufactured, and have always been manufactured, with 100% prime resin so a consistent quality product can be expected with every purchase. For use in 1 to 1-1/8 oz. skeet, sporting clays or hunting loads. Versatile for most hulls depending on powder volume. Optimum load is 1 oz.
CLAYBUSTER WAD 20ga 7/8oz CB1078 (WAA20) 5000/Case
Product Information
C & D Special Products' Claybuster Wad Line is a well-established economical wad line built for target-shooters and wing-shooters alike. The Claybuster Wad Line can satisfy nearly every target or wing shooting application for reloading. The wads are manufactured with 100% prime resin so a consistent quality product can be expected with every purchase. For use in 7/8 to 1-1/4 oz. skeet, sporting clay or hunting loads. Versatile for most hulls depending on powder volume. Optimum load is 7/8 oz. THIS IS A CASE OF 5000 WADS.
CLAYBUSTER WAD 28ga 3/4oz CB5034 (WAA28-HS) 5000/Case
Product Information:
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. For use in 3/4 oz. Winchester HS, Remington, or Federal hulls. Optimum load is 3/4 oz. This is for a full case of 5000 pieces.
CLAYBUSTER WAD CB1100 12ga 7/8 to 1.0 oz (WAA12SL) 5000/Case
Product Information:
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. This wad is perfect for 7/8 to 1 oz target shooting loads and performs best in tapered hulls.
For use in 7/8 to 1 oz. trap, skeet or sporting clay loads. Performs best in tapered hulls, Remington or Winchester.
Optimum load is 1 oz.
Featuring: Lead-in Taper, this Claybuster Was now features a lead-in taper on the powder cup that reduces the possibility of catching on the insert in the HS Hull.
