BPI CORK FILLER/CUSHION WAD 12ga .125″ 250/BAG
$20.00
Product Information
Cork wads are placed under the shot bringing the load up to perfect crimping height. Cork wads are light, dense and very flexible – great for smaller pellet sizes. Cork wads can be stacked to accomodate any height requirements. Use 12 gauge cork wads inside 10 gauge shotcups and 20 gauge cork wads inside 12 gauge shotcups. Cork wads can be used in place of other filller wads but are not to be used directly on the powder.
9 in stock
Product Information
Cork wads are placed under the shot bringing the load up to perfect crimping height. Cork wads are light, dense and very flexible – great for smaller pellet sizes. Cork wads can be stacked to accomodate any height requirements. Use 12 gauge cork wads inside 10 gauge shotcups and 20 gauge cork wads inside 12 gauge shotcups. Cork wads can be used in place of other filller wads but are not to be used directly on the powder.
| Weight | 0.2 lbs |
|---|
Related products
BPI WAD 12ga HCD #21 1oz TO 1-1/8oz LEAD 250/BAG
Product Information
- Gas Seal: arched dome .725" diameter, .215" thick - two powder migration rings and two stabilization rings
- Overall length: 1.6"
- Seal to cup bottom: .900"
- Shotcup depth: .740"
- Shotcup type: lay-back hinged
- Shot level in cup: 1oz+
- Optimum range: 30-65 yards
- Going away targets
CLAYBUSTER – Wads 12 Gauge CB1118-12 (Replaces WAA12) 5000/Case
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. This wad was designed for 1 to 1-5/8 oz trap, skeet, sporting clays, or hunting loads and performs best in tapered hulls.
Technical Information:
•Replaces the Winchester WAA12
•Optimal Load: 1-1/8 oz
•Intended as an economical wad replacement for target and wing shooters
•500/bag
•Wads are made with 100% prime resin for consistency
Claybuster Shotshell Wads 12 Gauge CB2118-12 (Replaces 12S3) 1-1/8 oz 500/Bag
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. CB2118-12 is perfect for 1-1/8 to 1-1/4 oz target or hunting loads and works best in straight wall hulls such as Federal or Fiocchi.
500/Bag
Claybuster Shotshell Wads 12 Gauge CB8100-12 (Replaces TGT12) 1 oz 5000/Case
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. The CB8100-12 wad is great for use in 7/8 to 1-1/8 oz trap, skeet, or sporting clays loads. This wad performs best in tapered hulls such as Remington or Winchester.
Technical Information:
Replaces the Remington TGT12
Optimal Load: 1 oz
Intended as an economical wad replacement for target and wing shooters
Wads are made with 100% prime resin for consistency
5000/Case
Claybuster Shotshell Wads 12 Gauge CB8100-12 (Replaces TGT12) 1oz 500/Bag
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. The CB8100-12 wad is great for use in 7/8 to 1-1/8 oz trap, skeet, or sporting clays loads. This wad performs best in tapered hulls such as Remington or Winchester.
Technical Information:
Replaces the Remington TGT12
Optimal Load: 1 oz
Intended as an economical wad replacement for target and wing shooters
Wads are made with 100% prime resin for consistency
CLAYBUSTER WAD 12ga 1-1/4 to 1-3/8 CB1114 (WAA12F114) 500/Bag
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. CB1114 is a general use wad for 1-1/8 to 1-1/4 oz loads.
Technical Information:
12ga
These wads are a direct replacement for the Winchester WAA12F114.
Shot Capacity: 1-1/4 oz
Fits: TAPERED HULL
Replaces OEM: WIN. WAA12F114, CB1114-12
OEM COPY/CLONE; Tapered Case (Tapered case = STS, Nitro 27, High Velocity, Gun Club, AA HS and AA Old Style compression formed)
500/Bag
CLAYBUSTER WAD 12ga 3/4oz CB0175 500/Bag
Product Information
CLAYBUSTER WAD CB1100 12ga 7/8 to 1.0 oz (WAA12SL) 5000/Case
Product Information:
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. This wad is perfect for 7/8 to 1 oz target shooting loads and performs best in tapered hulls.
For use in 7/8 to 1 oz. trap, skeet or sporting clay loads. Performs best in tapered hulls, Remington or Winchester.
Optimum load is 1 oz.
Featuring: Lead-in Taper, this Claybuster Was now features a lead-in taper on the powder cup that reduces the possibility of catching on the insert in the HS Hull.
