BPI CORK FILLER/CUSHION WAD 12ga .125″ 250/BAG
$20.00
Product Information
Cork wads are placed under the shot bringing the load up to perfect crimping height. Cork wads are light, dense and very flexible – great for smaller pellet sizes. Cork wads can be stacked to accomodate any height requirements. Use 12 gauge cork wads inside 10 gauge shotcups and 20 gauge cork wads inside 12 gauge shotcups. Cork wads can be used in place of other filller wads but are not to be used directly on the powder.
9 in stock
Product Information
Cork wads are placed under the shot bringing the load up to perfect crimping height. Cork wads are light, dense and very flexible – great for smaller pellet sizes. Cork wads can be stacked to accomodate any height requirements. Use 12 gauge cork wads inside 10 gauge shotcups and 20 gauge cork wads inside 12 gauge shotcups. Cork wads can be used in place of other filller wads but are not to be used directly on the powder.
| Weight | 0.2 lbs |
|---|
Related products
Claybuster Shotshell Wads 12 Gauge CB8100-12 (Replaces TGT12) 1oz 500/Bag
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. The CB8100-12 wad is great for use in 7/8 to 1-1/8 oz trap, skeet, or sporting clays loads. This wad performs best in tapered hulls such as Remington or Winchester.
Technical Information:
Replaces the Remington TGT12
Optimal Load: 1 oz
Intended as an economical wad replacement for target and wing shooters
Wads are made with 100% prime resin for consistency
CLAYBUSTER WAD 12ga 1-1/8 (FIG-8) CB8118 500/Bag
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. This wad was designed for use in 1-1/8 to 1-1/4 oz target or hunting loads in tapered hulls such as Remington or Winchester. 500/Bag
CLAYBUSTER WAD 12ga 1-1/8 (FIG-8) CB8118 5000/Case
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. This wad was designed for use in 1-1/8 to 1-1/4 oz target or hunting loads in tapered hulls such as Remington or Winchester. 5000/Case
CLAYBUSTER WAD 16ga 1 to 1-1/8oz CB0100 (WAA16) 5000/Case
Product Information
Claybuster's Wad Line can satisfy nearly every target or wing shooting application for reloading. The wads are manufactured, and have always been manufactured, with 100% prime resin so a consistent quality product can be expected with every purchase. For use in 1 to 1-1/8 oz. skeet, sporting clays or hunting loads. Versatile for most hulls depending on powder volume. Optimum load is 1 oz. 5000/Case
CLAYBUSTER WAD 20ga 7/8oz CB1078 (WAA20) 500/Bag
Product Information
C & D Special Products' Claybuster Wad Line is a well-established economical wad line built for target-shooters and wing-shooters alike. The Claybuster Wad Line can satisfy nearly every target or wing shooting application for reloading. The wads are manufactured with 100% prime resin so a consistent quality product can be expected with every purchase. For use in 7/8 to 1-1/4 oz. skeet, sporting clay or hunting loads. Versatile for most hulls depending on powder volume. Optimum load is 7/8 oz.
CLAYBUSTER WAD 28ga 3/4oz CB5034 (WAA28-HS) 500/Bag
Product Information
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. For use in 3/4 oz. Winchester HS, Remington, or Federal hulls. Optimum load is 3/4 oz. 500 pieces per bag
CLAYBUSTER WAD SW250-12ga 1-1/4 to 1-3/8 SLUG WAD 250/Bag
Product Information:
Intended as an economical wad replacement for name brand wads, Claybuster wads are ideal for target and wing shooters. Made with 100% prime resin for consistency with every loaded shell. The Claybuster Slug Wad is a beefy design, which is made to handle the rigors of slugs. Wads are essential for shotshell reloading. They fill extra space in the hull to make sure there is no room for the shot and powder to move around. They also act as a barrier between the powder and shot charges to ensure proper powder ignition, protect the shot from hot gasses and seal gasses behind the shot so that it can be propelled down the barrel. The wad also acts as a dual barrier to protect the barrel from becoming damaged by hard shot and to protect soft shot from becoming deformed by contact with hard barrel steel.
TPS 12ga 3″ Preslit Wad for Non-Toxic Shot 1-1/4 STEEL 1.5 ITX 100/Bag
|
